http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
표준전자식 혈압계와 수은혈압계, 전자혈압계의 비교 선행연구
양지상,임현균,조동헌,Yahng, J.S.,Lim, H.K.,Cho, D.H. 대한의용생체공학회 2012 의공학회지 Vol.33 No.3
Devices to measure the blood pressure of patients are being used without any calibration in a hospital. It is an important to show consistent values when any medical devices measure the same patients regardless they are sphygmomanometer or fully automatic electronic blood pressure meter. We compared sphygmomanometer and fully automatic electronic blood pressure meters with standard digital blood pressure monitor (SDBPM) to evaluate the consistency of the small healthy subjects. We measured the blood pressure from six healthy subjects (three of 20~40 years and three of 40~60 years old). Two sphygmomanometer and two fully automatic electronic blood pressure meters were used and compared with the SDBPM. Blood pressures measured from right and left arms each and were compared. All six healthy subjects showed normal blood pressure values. In general, left blood pressure values showed higher values than right side. Comparing SDBPM, with the other monitors, the systolic pressure showed ${\pm}$ 34.8% difference and ${\pm}$ 33.3% for the diastolic pressure. Correlation between SDBPM and Sphygmomanometer was 0.59~0.71, and 0.50~0.70 for fully automated digital BP monitors. It fell in grade-D when we apply the BHS(British hypertension society). AAMI(American association for the advancement of medical instrumentation) also showed unsatisfactory results for the mean value (${\leq}$ 5 mmHg) and standard deviation (${\leq}$ 8 mmHg). We tested sphygmomanometer and fully automatic electronic blood pressure meters and compared with a standard digital blood pressure monitor. All devices showed inconsistent blood pressures. A reliable calibration system is highly needed for all devices in all hospitals.
양지상,남정림,정세채 한국레이저가공학회 2007 한국레이저가공학회 학술대회 논문집 Vol.2007 No.-
반도체인 실리콘과 금속인 스틸의 펨토초 레이저 가공에 있어서 기판 온도에 대한 의존성을 연구하였다. 펄스당 어블레이션 효율과 임계출력은 대상 물질의 전기적 전도성에 의존하며, 공정 물질의 전도성이 클수록 어블레이션 효율이 기판 온도에 영향을 많이 받게 된다. 이러한 실험적인 결과는 자유전자나 정공과 같은 운반자의 역할이 펨토초 레이저를 이용한 물질의 어블레이션상에서 작동하는 기작에 매우 중요함을 의미한다.
초고속레이저 기반 마이크로 패키징 및 게르마늄 표면 공정 기술 개발
정세채,양지상,Jeoung, S.C.,Yahng, J.S. 한국진공학회 2007 Applied Science and Convergence Technology Vol.16 No.1
전자 산업의 발달과 더불어 더욱 더 작은 구조물의 제작을 위한 새로운 물질공정 기술에 대한 수요가 증가하고 있다. 물질 고유의 물리적인 성질을 유지하면서 초미세 공정이 필용한 시점에서 기존의 전통적으로 사용하여 왔던 기계적인 방법과 레이저 공정은 공정 분해능의 한계와 물리화학적인 변형 때문에 최종 부품의 성능저하와 불량률을 증가시켜 많은 문제점을 내포하고 있다. 반면에 고출력 펨토초 레이저 기반물질 공정 기술은 기존 레이저 공정에 비해 열적 손상이 매우 작기 때문에 최근 많은 분야에서 큰 관심을 불러일으키고 있다. 본 해설 논문에서는 박형 실리콘 기판의 마이크로 패키징 및 게르마늄 표면 공정을 통한 나노구조체 형성에 대해 본 연구진에서 발표한 최근의 개발 내용을 중심으로 관련 연구 분야를 소개하고자 한다. Much interests has been drawn for noble micro-engineering processes for the continuous size reduction on bulk materials from the field of micro-electronics with much downsized IC chips. A traditional microprocessing based on mechanical blade as well as a relatively long pulsed laser usually influence the physico-chemical properties of intact materials when the techniques are applied to process materials with a spatial resolution less than 10 microns. Meanwhile, ultrafast laser pulses are known to exhibit a very small heat-affect zone(HAE) compared to the traditional laser processing and to be applicable for the new functional materials with high performance in optical and electrical properties. In this report, we will review in brief the recent research works on the enhancement of micro-cutting speed of thin silicon wafer as well as the formation of Ge nanostructures based on ultrafast laser pulses.
HVDC Cable Accessary용, EPDM/Nano Layered Silicate Composites의 전기적 특성연구
김지은(Ji-Eun Kim),홍진성(Jin-Seong Hong),김학수(Hak-Su Kim),김효섭(Hyo-Sup Kim),최문혁(Moon-Hyuk choi),양지상(Ji-Sang Yang),임호준(Ho-Jun Lim),장윤경(Yoon-Gyeong Jang),박힘찬(Him-Chan Park),이지희(Ji-hee Lee),이동윤(Dong-Yoon Lee),박 대한전기학회 2020 대한전기학회 학술대회 논문집 Vol.2020 No.7