http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
PNS계 고성능 감수제와 시멘트 수용성 알칼리양과의 상용성이 콘크리트 물성에 미치는 영향
안태호,박준희,소광호,Ahn, Tae-ho,Park, Junhui,Sho, Kwangho 한국결정성장학회 2017 한국결정성장학회지 Vol.27 No.4
PNS 감수제와 시멘트 페이스트의 유동성의 관계를 평가하기 위해 물시멘트비 35 %에 PNS의 감수제 첨가하여 세 가지 시멘트에 대해 평가하였다. 세 가지 시멘트의 화학적 성질은 XRD, XRF로 평가하고, 물시멘트비 33 %인 콘크리트에 대한 $Na_2SO_4$의 첨가 효과는 압축강도, 슬럼프, 공기 함량의 측정에 의해 평가하였다. 실험 결과는 시멘트 A 및 C에 황산나트륨 2.6 %를 첨가하면 슬럼프 손실이 개선됨을 보여 주었으며, 시멘트 E의 경우 황산나트륨 1.3 % 첨가가 효과적이었다. A polynaphthalenesulfonate (PNS) superplasticizer and its relation to the fluidity of cement paste (w/c = 0.35) has been investigated for three cements at a given dosage of PNS superplasticizer. Chemical properties of three cements were characterized with a XRD, XRF. The additive effects of $Na_2SO_4$ on the fresh concrete with w/c = 0.33 were also estimated by the measurement of compressive strength, slump, air content. The experimental results exhibited that the addition of sodium sulfate 2.6 % to the cement A and C improves slump loss. In case of cement E, the addition of sodium sulfate 1.3 % was effective.
안태호,김명관,이동엽,Ahn Tae-Ho,Kim Myung-Kwan,Lee Dong-Yeup 대한경영정보학회 2000 경영과 정보연구 Vol.5 No.-
Project Managers want to reduce the cost and the completion time of the project simultaneously. But the project completion time tends to increase as the project cost is reduced, and the project cost has a tendency to increase as the project completion time is reduced. In this paper, the resource constrained project scheduling problem with multiple crashable modes is considered. An exact solution method for finding the efficient solution set and the computational results are introduced.
R&D 프로젝트 포트폴리오 구성 휴리스틱 기법 - 대안을 지닌 프로젝트의 경우
안태호(Tae-Ho Ahn) 숭실대학교 사회과학연구소 2007 사회과학논총 Vol.9 No.-
R&D 프로젝트 포트폴리오 구성 문제는 기술경영 분야에 있어 매우 중요한 문제이다. 안태호(2006)는 다양한 속성들을 고려하는 포트폴리오 구성 모형을 개발하였고 또한 최적화 기법을 소개하였는데, 본고에서는 안태호(2006)에서 소개되지 않았던 휴리스틱 기법을 소개한다. A problem of constructing R&D project portfolio is a very hot issue in technology management field. Ahn(2006) introduced the R&D project portfolio model with various attributes and an optimal procedure for the problem. This paper presents a heuristic procedure for R&D project portfolio using the model introduced by Ahn(2006).
콘크리트의 역학적 특성에 대한 바텀애시 골재 양의 영향
안태호(Tae-Ho Ahn),양근혁(Keun-Hyeok Yang),하정수(Jung-Soo Ha) 한국건설순환자원학회 2020 한국건설순환자원학회 논문집 Vol.8 No.4
본 연구에서는 바텀애시 골재 양이 콘크리트의 압축강도 발현 및 역학적 특성(탄성계수, 쪼갬 인장강도, 파괴계수)에 미치는 영향을 평가하였다. 실험변수는 천연모래에 대한 바텀애시 잔골재 치환율과 물-시멘트 비이다. 실험결과 바텀애시 골재 콘크리트의 재령 28일 압축강도와 재령 28일 압축강도 루트승으로 무차원한 바텀애시 골재 콘크리트의 역학적 특성들의 값들은 바텀애시 잔골재 양의 증가와 함께 감소하는 경향을 보였다. fib 2010의 모델식과 비교하면, 바텀애시 골재 콘크리트의 압축강도에 대한 초기 발현율은 낮은 반면 장기 발현율은 높았으며, 탄성계수와 파괴계수는 안전측에서 평가될 수 있지만, 쪼갬 인장강도는 불안전측이었다. The present study examined the effect of bottom ash aggregate contents on the compressive strength gain and mechanical properties(modulus of elasticity and rupture and splitting tensile strength) of concrete. Main test parameters were water-to-cement ratio and bottom ash aggregate contents for replacement of natural sand. Test results showed that the 28-days compressive strength of concrete and mechanical properties normalized by the compressive strength tended to decrease with the increase in bottom ash fine aggregate content. When compared with fib 2010 model equations, bottom ash aggregate concrete exhibited the following performances: lower rates of compressive strength gain at early ages but greater rates at long-term ages; slightly higher measurements for modulus of elasticity and rupture; and lower measurements for splitting tensile strength.