http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
직교보 단면크기 변화에 따른 RCS구조 보-기둥 접합부의 전단내력에 관한 실험적 연구
안재혁,박천석 한국구조물진단유지관리공학회 2006 한국구조물진단유지관리공학회 논문집 Vol.10 No.6
최근 시공의 합리화와 경제성의 목적으로 한 다양한 연구가 진행되고 있다. 철근 콘크리트 기둥과 철골 보로 이루어진 RCS 구조의 개발에 대한 연구 역시 활발해지고 있다. RCS 구조 보-기둥 접합부 패널존의 저항기구는 내부패널에서 외부패널로 응력이 전달될 때 직교보의 영향을 받지만, 기존연구에는 직교보의 영향을 고려하지 않고 있다. 본 연구에서는 웨브, 플랜지, 직교보의 두께, FBP의 유뮤등 다양한 변수들을 가지는 5개의 철근콘크리트 기둥과 철골보로 이루어진 보-기둥 내부접합부 실험체의 실험을 통해 직교보들의 영향과 구조적 성능을 조사하고자 한다. 이러한 실험결과들로부터, 보-기둥 접합부의 직교보가 전단내력과 구조성능을 향상시키는데 효과적이라는 것을 알 수 있다. Recently, in order to realization of construction and economical saving, various studies are progressing. Also, the study on RCS system which is consisted of reinforced concrete column and steel beam is progressing actively. Actually, however, resisting mechanism of panel zone is influenced by transverse beams when the stress transfers inner panel to outer panel but existing literature didn't reflect the effect of transverse beams. This paper is to analyze the test result of five inner beam-column joints specimen with a variable such as web, flange thickness of transverse beam and face bearing plate(FBP) for RCS systems were tested under cyclic loadings conforming to NEHRP recommendation to investigate the effect of transverse beams and the structural performance of beam-column joints. From the test result, it was shown that transverse beams are effective to enhance the shear strength and structural performance of beam-column joints.
Fin Wall을 사용한 타워형 무량판 구조시스템 아파트의 횡변위 및 평면 위치별 횡변위 차이에 대한 제어 방안
안재혁,박천석 대한건축학회지회연합회 2010 대한건축학회연합논문집 Vol.12 No.4
본 연구에서는 Fin Wall을 사용한 탑워형 무량판 구조시스템 아파트에서 횡하중에 의한 횡변위의 변위 차이에 대해 검토하기 위해 범용 해석프로그램인 MIDAS GEW으로 구조해석을 실시하여 변위 차이의 크기 및 특성을 파악하였다. 그리고 횡변위 차이를 제어하기 위해 2가지 Type의 구조 평면을 제시하고 제안한 구조 평면에 대해 구조해석을 실시하고 횡변위 변화와 횡변위 차이에 대해 분석하여 다음과 같은 결론을 얻었다. 본 연구에서 제시한 구조평면은 기존 평면의 횡변위보다 Type 1은 24%(5.4cm), Type 2는 41%(9.2cm) 정도의 횡변위가 감소하였다. 그리고, 횡변위에 대한 변위차이는 Type 1에서 5%(0.9cm), Type 2에서 13%(1.7cm) 정도 발생하였으나 기존 평면에서 28%(4.9cm)발생한 것에 비해 크게 감소하였다.
균열에 의해 손상된 목재보의 합성수지를 이용한 보강방법에 따른 휨 성능 보강효과
안재혁 대한건축학회지회연합회 2012 대한건축학회연합논문집 Vol.14 No.3
목재에 합성수지를 이용한 보수·보강방법은 전통 목구조 건조물의 접합부와 같이 형태상 교체를 용이하지 않고 재사용이 가능한 부재에 주로 사용하는 보수·보강방법으로 물리적 방법과 화학적 방법이 결합된 시공방법으로 노후화되거나 부식 손상된 부재의 결손 부분을 에폭시와 같은 합성수지를 이용하여 채워주거나 균열이 발생한 부재를 보강하기 위해 사용한다. 이러한 목재에 대한 합성수지를 이용한 본존처리에 대한 연구는 최근에 진행되기 시작하였으나 주로 진행된 연구들은 부식에 의한 결손 단면에 합성수지를 이용한 보수·보강에 대해 진행되고 균열에 의해 손상된 부재에 대한 보수·보강에 대해 진행된 연구는 거의 미미한 실정이라고 할 수 있다. 따라서 본 연구에서는 균열에 의해 손상된 목재보에 대해 합성수지를 이용해서 균열부 충전, 균열부 제거후 채움, 균열부 제거후 신 목재 접합 등과 같은 보수·보강방법들 적용하여 보강된 목재보의 휨 실험을 통해 다양한 보강방법들에 대한 비교·분석하여 구조적 거동을 살펴보고 균열에 의해 손상된 목재보에 대해 합성수지를 이용한 보강효과를 검토해 본다.
철골보와 철근콘크리트기둥으로 이루어진 접합부의 기존 내력평가법에 관한 비교연구
안재혁,박천석 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.2(구조계)
This paper is on the study of strength evaluation for the frame joint made from reinforced concrete column and steel beam(RCS system joints). Especially for those categorized as through beam type, the accuracy of the existing design equations proposed in the inside and outside of the country was studied in detail with shear key such as face bearing plate(FBP), Extended FBP, vertical joint reinforcement. It was shown that strength evaluation equations proposed in James K. Wight provided the most accurate and consistent strength estimates. Some design equations proposed by Japanese often underrated the joint strength for specific joint details.
나선형 파동유도관 결합을 통한 초음파센서의 탐지범위 개선
안재혁,김진오 한국소음진동공학회 2022 한국소음진동공학회 논문집 Vol.32 No.3
This paper presents a method to improve the detectable range of an ultrasonic sensor for distance measurements by coupling the sensor with a helical waveguide. In particular, this study aimed to decrease the effective length of circularly curved waveguides, in addition to reducing the minimum and maintaining the maximum detectable distances. To this end, finite element analyses were used to predict the ultrasound propagation in a waveguide with a uniform circular cross-section along the spiral path. Two types of cross-sectional sizes were compared: one with a diameter identical to that of the sensor face and another with a diameter twice this value. Furthermore, experiments were performed with fabricated prototypes to evaluate the detectable range by measuring the minimum and maximum detectable distances. Notably, by coupling the helical waveguide with the ultrasonic sensor, the minimum detectable distance was reduced to 1/3 times that for a sensor without the waveguide, while the maximum detectable distance was maintained. Moreover, the effective length of the helical waveguide was decreased, as compared with that of linear or circularly curved waveguides.