http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
안성광,진성호,반태원,Pachagounder Sakthivel,제갈영순,이준희 한국고분자학회 2012 Macromolecular Research Vol.20 No.5
A new crosslinkable polythiophene derivative, poly(hexynyl2-PDOT-co-heptyl2-PDOT), with propylenedioxythiophene moiety containing solubilizing and crosslinkable substitutents as a pendant group were synthesized by oxidative polymerization using FeCl3. The resulting copolymer was soluble in organic solvents and spun cast onto the indium tin oxide-coated glass substrate to create a uniform thin film. After thermal crosslinking and rinsing of the crosslinked thin film using chloroform, the π-π transition peak and the absorption edge appeared at almost the same wavelength as that of the untreated copolymer. We fabricated organic light-emitting diodes (OLEDs) in ITO/buffer layer/poly[2-(2'-ethylhexyloxy)-5-methoxy-1,4-phenylenevinylene] (MEH-PPV)/LiF/Ca/Al configuration using either poly(3,4-ethylenedioxythiophene) doped with poly(styrenesulfonate) (PEDOT:PSS) or poly(hexynyl2-PDOT-co-heptyl2-PDOT) as buffer layers. Due to the intrinsic conductivity of poly(hexynyl2-PDOT-co-heptyl2-PDOT) vs. that of PEDOT:PSS caused decreased OLED performance. The turn-on voltage of the OLED using poly(hexynyl2-PDOT-co-heptyl2-PDOT) buffer layer was observed at 5 V. The maximum brightness and luminance efficiencies were 2,597 cd/m2 at 12 V and 0.3 cd/A, respectively.
안성광,김윤진,김기선 한국원예학회 2013 Horticulture, Environment, and Biotechnology Vol.54 No.3
Inflorescences of Doritaenopsis are commonly induced when the plants are exposed to temperature below 26°C. They need to maintain temperature above 28°C for maintaining the vegetative growth stage and inhibiting inflorescence initiation. We investigated the effects of photoperiod on inflorescence initiation in immature Doritaenopsis at floral inductive temperatures in order to determine an alternative method to prevent inflorescence initiation and to reduce heating expenses. Six-month-old Doritaenopsis Queen Beer ‘Mantefon’ was grown under 9/15 hours (SD),12/12 hours (MD), 16/8 hours (LD), or SD with night interruption (NI: 22:00-02:00 HR) at 21 or 26°C in module boxes inside a growth chamber. The maximum irradiance was 100 ± 10 and 4 ± 1 µmol·m-2·s-1 during the day and NI, respectively. Inflorescence of the plants was completely inhibited when the plants were grown at 26°C, whereas the plants grown at 21°C could not inhibit inflorescence initiation. However, percent visible inflorescence was reduced greatly in LD when the plants grown at 21°C. NI also reduced visible inflorescence. The LD delayed days to visible inflorescence, followed by MD, NI, and SD when the plants were grown at 21°C. The number of new leaves and leaf span were increased in the plants grown at 26°C more than those grown at 21°C. The plants grown under LD at 21°C had a similar number of new leaves compared to the plants grown at 26°C until 17 weeks of treatment. These results indicated that LD or NI could be an alternative method to high temperature above 26°C for inhibiting inflorescence initiation in immature Doritaenopsis ‘Mantefon’ and could thus save heating costs.
Eucalyptus parvular 분화 생산을 위한 적정 상토용적수분함량 구명
안성광(Seong Kwang An),김종윤(Jongyun Kim) 한국원예학회 2021 한국원예학회 학술발표요지 Vol.2021 No.10
실내식물로 이용되는 분화 Eucalyptus는 2017년에 비해 2020년 거래량이 약 3배 증가하며 국내 시장 수요가 증가하고 있다. 이로 인하여 국내 재배량 또한 증가하고 있으나, 목본식물에 속하는 Eucalyptus를 분화로 생산하기 위한 재배관리, 특히 관수관리에 대한 연구는 미흡한 실정이다. 본 연구는 최근 정밀한 관수제어로 작물의 수분조절 연구를 가능케한 토양수분센서 기반 자동관수시스템의 적용을 통해, 분화 Eucalyptus의 고품질 생산을 위한 상토용적수분함량(volumetric water content, VWC)을 구명하고, 본 시스템의 적용가능성을 확인하고자 수행하였다. 실험에 사용된 4개월생 Eucalyptus parvular 실생묘는 완효성비료(Multicote 6, Haifa, 14-14-14)를 4g·L-1로 섞은 원예용상토(Sunshine Mix4, Sun Gro)가 담긴 10cm 화분에 이식하였고, 처리 2주전 균일한 형태로 전정 후 6주간 자동관수로 처리하였다. 본 연구에 사용된 토양수분센서 기반 자동관수시스템은 FDR 형태 토양수분센서(EC-5, METER Group)와 데이터로거(CR1000, Campbell Scientific)를 이용하여 4처리, 4반복으로 난괴법으로 설계되었으며, 실험구 내 소반복을 두어 연구를 수행하였다. Eucalyptus의 VWC에 대한 반응을 확인하기 위해 0.3, 0.4, 0.5 및 0.6 ㎥·m<SUP>-3</SUP> 4수준의 VWC를 관수시점으로 설정하였으며, 관수는 화분 내 VWC가 설정된 시점 이하로 떨어질 시 관수 당 10 mL가 점적으로 공급되었다. 3주 간격의 조사를 통해 생육지표, 생리적지표를 조사하였으며, 실험구 내 처리된 VWC가 잘 유지되었는지 수확 시 화분의 실제 VWC를 측정하여 확인하였다. 토양수분센서가 설치된 Eucalyptus의 경우, 전체 실험기간 동안 설정된 VWC를 매우 정밀하게 유지할 수 있었다. 하지만 동일 실험단위에 놓인 소반복 개체들은 처리된 VWC와 실제 VWC에 차이가 있었으며, 이는 VWC 처리간 대부분의 생육측정 항목에서 유의차가 나타나지 않은 원인으로 판단되었다. 그럼에도 불구하고 Eucalyptus의 생육은 수확 시 측정된 실제 VWC 값에 따른 차이가 나타나, 개체별 실제 VWC에 대한 생육지표를 회귀분석하였다. 처리 3주 후 초장은 실제 VWC가 증가함에 따라 신장이 둔화됨을 볼 수 있었으나(p = 0.0193, Linear), 6주 후에는 차이가 나타나지 않은 반면, 초폭의 경우 3주차에는 실제 VWC가 0.39 ㎥·m<SUP>-3</SUP>를 기준으로 (p = 0.0111, Quadratic), 6주차에는 실제 VWC 0.42 ㎥·m<SUP>-3</SUP>를 기점으로 (p = 0.0201, Quadratic) VWC가 낮거나 높을수록 신장이 둔화된 반응을 나타내었다. 주간직경은 시간이 지남에 따라 비대하였지만 VWC에 따른 차이는 보이지 않았으며, 잎의 형태와 관련된 엽폭과 엽장 또한 처리에 대한 차이는 나타나지 않았다. 지상부 생체중과 건물중 역시 처리된 VWC에는 차이가 나타나지 않았지만, 실제 VWC에 대해선 기간에 따른 다른 반응이 관찰되었는데, 처리 3주 차에는 VWC가 증가함에 따라 생체중(p = 0.0038, Linear)과 건물중(p = 0.0063, Linear)이 감소하는 선형회귀 양상을, 6주차에는 0.41 ㎥·m<SUP>-3</SUP>을 최고점으로 실제 VWC가 더 높거나 낮아질 수록 감소하는 2차회귀 경향을 나타내었다. VWC에 따른 생리적 스트레스의 정도를 파악하기 위해 측정된 광계II의 최대양자수율(Fv/Fm)의 경우 처리된 VWC 뿐만 아니라 실제 VWC간 차이는 발생하지 않았다. 본 연구에서는 토양수분센서 기반 자동관수시스템을 적용해 목본식물인 Eucalyptus를 분화로 생산하기 위해서는 보다 균일한 관수가 이뤄질 필요가 있다는 것을 확인하였고, 추후 센서의 설치위치나 개수 및 관수방법 등에 대한 추가 연구가 더 필요할 것이라 사료되었다. 또한, VWC를 약 0.4 ㎥·m<SUP>-3</SUP>로 유지하는 것이 Eucalyptus 분화 재배시 생산성을 높일 수 있는 적정 VWC라 판단되었다.