http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
싱가포르는 왜 민주화되지 않는가? 비교연구 방법을 활용한 지역연구
신재혁 한국동남아학회 2019 동남아시아연구 Vol.29 No.2
A conventional research method in regional studies is the single-case study that typically requires field research for a deep understanding of the context of a country or a region. In this article I investigate why Singapore has not democratized as an example of regional studies using comparative methods. Such regional studies can raise the importance of research questions deriving from single-case studies, increase the validity of arguments, and contribute to the development of theories in social sciences.
Floating zone법에 의한 결정성장시 소결봉의 미세구조에 의한 영향
신재혁,오근호 한국결정성장학회 1995 한국결정성장학회지 Vol.5 No.3
일반적으로 floating zone법에 의한 결정성장시에는 소결봉이 원료로서 사용되며 이러한 원료봉의 소결조건에 의해 결정성장시 안정성이 영향을 받게 된다. 그 원인은 FZ법에 의한 결정성장시 소결조건에 따른 원료봉의 미세구조의 변화가 소결봉과 융액사이의 계면형태를 변화시키기 때문이다. 본 연구에서 FZ법에 의해 $TiO_2$(rutile)과 ruby 단결정을 성장하였으며 이를 통해 소결봉의 미세구조가 FZ법에 의한 결정성장시에 용융대의 안정서에 미치는 영향을 분석하였다.$TiO_2$(rutile)과 ruby의 결정성장에 사용되는 원료봉의 소결시 소결온도가 높아지고 소결시간이 길어질수록 원료봉 중앙부와 바깥ㅂ분의 입자크기의 차이가 커져서 결국에는 그로 인하여 원료봉의 용융양상이 바뀌어졌다. FZ법에 의한 결정성장시 원료봉의 최적소결 조건은 입자의 크기가 소결봉 전영역에 걸쳐 균일하게 분포되는 것이었다. 반면 일반 적으로 중요하다고 여기는 소결봉의 porosity는 FZ법에 의한 결정성장시 영향력 있는 인자가 아니라는 점을 소결하지 않은 원료봉을 사용해 결정성장 실험을 행하여 봄으로써 확인할 수 있었다. In general, a sintered rod is used as a feed in the growth of crystals by the floating zone(FZ) method. The sintering condition of the feed rod affected the stability of molten zone because it influenced the interface shape between the feed and the melt during the crystal growth. In this study, rutile and ruby crystals were chosen as samples to analyze the effect of the microstructures of the feed rods. In sintering of the feed rod for the growth of rutile and ruby single crystals, the difference of grain size between the inner and the outer region of the feed rod increased with the sintering temperature and dwelling time. As a result, it altered melting behavior of the feed. The uniform grain size of the sintered rod was necessary for the optimum growing condition of crystals. The effect of pores in the feed rod was not a dominant factor to grow crystals by the FZ method, which was confirmed by growing crystals with nonsinterd rods as feeds.
신재혁,김태환,강구헌 한국품질경영학회 2019 한국품질경영학회 학술대회 Vol.2019 No.-
본 연구는 군용항공기 운용 중 발생한 착륙장치 구성품 균열에 대한 품질개선내용을 담고 있다. 항공기의 지상활주시 기수를 좌/우 방향으로 조종하도록 하는 토크튜브 조립체 내의 기계적 연결장치 중 하나인 시소암에서 균열이 다수 발견되었다. 시소암은 지상활주 시 러더 발판을 사용하여 항공기 기수의 방향을 좌/우로 운전이 가능하도록 필요한 동력을 전달하는 장치이다. 균열 원인 파악을 위해 파단면 상세분석한 결과 시소암의 구조건전성 부족으로 인해 발생한 전형적인 피로균열 형태였다. 개선을 위해 기존 시소암의 구조건전성 해석을 수행한 결과 정적응력 안정율은 확보가 되어있었으나, 피로해석을 수행한 결과 요구되는 수명을 만족하지 못하였다. 이러한 시소암의 수명을 개선하기 위해 기체 요구수명을 충족할 수 있도록 시소암의 두께를 보강하는 하였으며, 구조건전성 검증을 위해 응력해석, 피로해석을 수행한 결과 요구되는 수명을 만족하였다.
신재혁,김경철,양인환 한국구조물진단유지관리공학회 2015 한국구조물진단유지관리공학회 논문집 Vol.19 No.4
Galvanizing is one of the method used to solve the problem of corrosion of reinforcement in concrete structures. There few research reported in the literature regarding the effect of galvanized coating on the behavior of lap splices in concrete beams. The objective of this study was to determine whether galvanized rebar adversely affects lap splice behavior and bond strength. Concrete beams reinforced with black or galvanized rebar were tested in flexure. The test variables included the presence of galvanized rebar steel diameter, and lengths of lap splices. The study concentrated on comparing crack, failure pattern, and bond strength. The ultimate behavior of beams reinforced with galvanized rebar was not significantly different from that of black steel reinforced beams. Therefore, the test results indicated that the use of galvanizing-coated rebar had no adverse effect on behavior in lap splices of rebar compared to the use of black rebar. 용융아연도금(galvanizing)은 콘크리트 구조물의 철근 부식 문제를 해결하기 위해 사용된다. 용융아연도금 철근 콘크리트 보의 부착강도 영향에 대한 자료는 거의 없는 실정이다. 따라서, 이 연구의 목적은 용융아연도금철근이 콘크리트 보의 부착강도에 미치는 영향을 파악하는 데있다. 용융아연도금철근을 사용한 부재와 일반철근을 사용한 부재의 구조실험을 통하여 겹침이음 거동과 부착강도 특성을 비교하였다. 실험변수로써 철근의 용융아연코팅 유무, 철근 직경과 겹침이음 길이를 고려하였다. 용융아연도금 철근콘크리트 보의 균열 및 파괴 특성을 파악하였다. 용융아연도금철근 콘크리트 보의 겹침이음부 휨 거동특성은 일반철근 콘크리트 보의 겹침이음부 휨거동과 유사한 것으로 나타난다. 또한, 용융아연도금철근의 사용은 일반철근을 사용할 때에 비해 콘크리트 보의 부착강도에 불리한 영향을 미치지는 않는 것으로 나타났다.
신재혁,이병훈,김갑래,김권 대한족부족관절학회 2016 대한족부족관절학회지 Vol.20 No.4
Diffuse pigmented villonodular synovitis (PVNS) involving ankle joint needs complete mass excision and total synovectomy to reduce recurrence rate, while surrounding ligaments can be easily damaged. So the concurrent ligament reconstruction should be considered for post-excisional instability in subtalar joint as well as lateral ankle joint. We describe our experience in the management of a diffuse type PVNS, invades lateral talocrural joint extended to subtalar joint and introduce a new technique of all-in-one reconstruction for anterior talofibular,calcaneofibular and cervical ligament. Our new reconstruction technique applying modified Chrisman and Snook technique is useful in stabilization for deficiencies of the ligament complexafter PVNS excisionat lateral ankle and subtalar joint.