http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
청소년기 자녀를 둔 어머니 마음챙김이 부모자녀관계에 미치는 영향: 양육효능감과 양육스트레스의 순차적 매개효과
신웅,최은실 한국심리학회 산하 한국발달심리학회 2024 한국심리학회지 발달 Vol.37 No.1
본 연구는 청소년기 자녀를 둔 어머니 마음챙김이 부모자녀관계로 이어지는 경로에서 양육효능감과 양육스트레스의 순차적 매개효과를 알아보고자 하였다. 중․고등학생 자녀를 둔 어머니 307명을 대상으로 연구를 실시하였다. 본 연구의 결과는 다음과 같다. 첫째, 어머니 마음챙김, 부모자녀관계, 양육효능감은 모두 서로 유의한 정적 상관관계를 나타냈으며, 양육스트레스와 어머니 마음챙김, 부모자녀관계, 양육효능감 각각은 유의한 부적 상관관계로 나타났다. 둘째, 어머니 마음챙김에서 부모자녀관계로 가는 경로에서 양육스트레스는 유의한 매개효과가 나타났고, 어머니 마음챙김에서 부모자녀관계로 가는 경로에서 양육효능감은 유의한 매개효과를 나타내지 않았다. 마지막으로, 어머니 마음챙김에서 부모자녀관계로 가는 경로에서 양육효능감과 양육스트레스는 순차적 매개 역할을 하는 것으로 나타났다. 연구 결과를 통해 어머니 마음챙김, 양육효능감, 양육스트레스, 부모자녀관계 간의 상호작용을 이해할 수 있으며, 어머니 마음챙김이 양육관련 변인을 통해 부모자녀관계에 영향을 미친다는 것을 확인함으로써 부모교육에서 어머니의 마음챙김을 다루는 것이 필요함을 시사한다. By considering the roles of parenting efficacy and parenting stress, this research sought to understand how maternal mindfulness influences parent-adolescent relationships. Surveys on 307 mothers with children in middle and high school revealed several correlations. First, mindfulness in mothers, parent-child relationships, and parental efficacy all showed significant positive correlations with each other. Additionally, parenting stress and mindfulness in mothers, parent-child relationships, and parental efficacy each showed significant negative correlations. Interestingly, while high maternal mindfulness appeared to enhance parenting efficacy and reduce stress, only parenting stress, served as a mediator in the relationship between mindfulness and the parent-child bond. These findings underscore the importance of maternal mindfulness in fostering healthier parent-child dynamics.
비회와 저회의 배합비에 따른 석탄회의 자경성에 관한 연구
신웅기(Shin Woonggi),임대성(Lim Daesung),천병식(Chun Byungsik) 한국지반환경공학회 2010 한국지반환경공학회논문집 Vol.11 No.6
우리나라의 대단위 국토개발이 실시됨에 따라 성토 및 매립재등의 막대한 건설재료가 사용되고 있는 실정이며, 국내 준설성토재 및 매립재가 부족한 실정이다. 이에 대한 대체재로 석탄회의 활용이 대두되고 있다. 석탄회는 포졸란의 특성을 가지고 있는 자경성의 재료로서 성토재 및 매립재로 대량활용의 가능성이 높은 재료이다. 이에 본 연구에서는 석탄회를 활용하기 전 가장 기초적인 연구인 자경성에 관한 물리적 성질을 규명하고자 비회와 저회의 입도분석시험, Atterberg한계시험, 비중시험 등을 실시하였고, 비회와 저회의 배합비에 따른 공학적 성질을 규명하고자 다짐시험, 일축압축강도시험, 직접전단시험, 삼축투수시험 등을 실시하였다. 시험결과 성토재 및 매립재로 사용하기 위해서는 비회와 저회의 배합비가 1:1일때 가장 효과적이며, 경량성 재료로써 구조물 주변의 성토재로 사용하면 배면에 작용하는 토압을 경감하는 효과를 보일것으로 판단된다. 또한 자경성에 의해 재령이 경과할수록 투수계수가 감소하기 때문에 설계시 이를 반영하여야 할것으로 판단된다. 위에서의 실험결과와 같이 석탄회는 채움재와 매립재의 대체재로써 유용하게 사용할 수 있을것이라 여겨진다. As enormous construction projects of land development are carried out around Korea, useful construction materials are needed to perform the construction projects. However, there are no more enough of fill and reclamation materials in our country. That is why the coal ash is expected to be utilized as an alternative material. Since the coal ash has the characteristics of a pozzolan and a selfhardening material, it is adjudged that coal ash has a great possibility to be used as a fill and reclamation material. In this study, grain size analysis, Atterberg limit test, and specific gravity test were performed to examine the physical characteristics of the coal ash about a self-hardening material before utilizing the coal ash in the construction. Compaction test, unconfined compression test, direct shear test, and flexible wall permeability test were conducted to investigate the engineering characteristics according to mixture ratios of fly ash and bottom ash. As a result of the tests, it was confirmed that the mixing ratio 1:1 of fly ash and bottom ash is the most effective to use as a fill and reclamation material. If the mixture of coal ash is used as a backfill material with light weight around structure, it is expected to play a significant role in reducing earth pressure on the back of the structure. As the age of the mixture of coal ash goes by, it intends to decrease the coefficient of permeability. As described above, the coal ash should be considered as an alternative material of fill and reclamation materials since the result of the tests indicates that the coal ash is suitable to a useful material on the construction design.
고효율 고체산화물 연료전지 개발을 위한 자발 착화 연소 합성법과 고상반응법에 의한 $La_ 0.7Sr_0.3MnO_3$ 양극재료 제조 및 물성에 관한 연구
신웅선,박인식,김선재,박성,Shin, Woong-Shun,Park, In-Sik,Kim, Sun-Jae,Park, Sung 한국전기전자재료학회 1997 電氣電子材料學會誌 Vol.10 No.2
L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ powders were prepared by both GNP(Glycine-Nitrate Process) and solid state reaction method in various of calcination temperature(800-1000.deg. C) and time in air. Also, L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ cathode contacts on YSZ(Yttria-Stabilized Zirconia) substrate were prepared by screen printing and sintering method as a function of sintering temperature(1100-1450.deg. C) in air. Sintering behaviors have been investigated by SEM(Scanning Electron Microscope) and porosity measurement. Compositional and structural characterization were carried out by X-ray diffractometer and ICP AES(Inductively Coupled Plasma-Atomic Emission Spectrometry) analysis. Electrical characterization was carried out by the electrical conductivity with linear 4 point probe method. As the calcination period increased in solid state reaction method, L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ phase increased. Although L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ single phase was obtained only for 48hrs at 1000.deg. C, in GNP method it was easy to get single and ultra-fine L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ powders with submicron particle size at 650.deg. C for 30min. The particle size and thickness of L $a_{0.7}$S $r_{0.3}$Mn $O_{3}$ cathode contact by solid state reaction method did not change during the heat treatment, while those by GNP method showed good sintering characteristics because initial powder size fabricated from GNP method is smaller than that fabricated from solid state reaction method. Based on enthalpy change from thermodynamic data and ICP-AES analysis, it was suggested to make cathode contact in composition of (L $a_{0.7}$S $r_{0.3}$)$_{0.91}$ Mn $O_{3}$ which have little second phase (L $a_{2}$Z $r_{2}$ $O_{7}$) for high efficient solid oxide fuel cells applications. As (L $a_{0.7}$S $r_{0.3}$)$_{0.91}$Mn $O_{3}$ cathode contact on YSZ substrate was sintering at 1250.deg. C the temperature that liquid phase sintering did not occur. It was possible to obtain proper cathode contacts with electrical conductivity of 150(S/cm) and porosity content of 30-40%.m) and porosity content of 30-40%.