http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
송창규,이상돈,조용주,Song, Chang-Kyu,Lee, Sang-Don,Cho, Yung-Joo 한국트라이볼로지학회 2007 한국윤활학회지(윤활학회지) Vol.23 No.2
It is very important to connect machinery and maintain it. This is usually done by bolt joint. There are two ways in connecting the bolt joint : the angle method and the torque method. The torque method is a method that let the clamping force maintain. The underhead of the bolt's head and the thread friction are the main influences. This study focuses on how the clamping farce and friction coefficient change under the condition in vibrating the underhead of the bolt's head part. As a result, under vibration condition, we found out that the clamping farce increases, while the friction coefficient decreases.
SpPCA와 MLP에 기반을 둔 응합법칙에 의한 MRS 패턴분류
송창규,이대종,전병석,유정웅,Song Chang kyu,Lee Dae jong,Jeon Byeong seok,Ryu Jeong woong 한국통신학회 2005 韓國通信學會論文誌 Vol.30 No.9C
본 논문에서는 SpPCA와 MLP에 기반을 둔 융합법칙에 의한 MRS 패턴분류기법을 제안한다. 차원축소를 위해 사용되는 기존의 PCA 기법은 입력데이터가 비선형 특성을 갖는 경우 최적의 변환행렬을 구할 수 없다는 문제점을 가지고 있다. 따라서, 본 논문에서는 구간별로 입력데이터를 분할한 후 PCA에 의해 특징을 추출하는 SpPCA 기법을 이용하여 입력패턴의 차원을 축소한다. 다음 단계인 분류단계에서는 MLP 비선형분류기를 이용하여 구간마다 추출된 특징벡터를 이용하여 기준패턴과의 유사도를 산출한다. 최종 분류단계에서는 MLP에 의해서 산출된 유사도에 기반을 둔 융합법칙에 의하여 MRS 패턴을 분류한다. 제안된 방법의 유용성을 보이기 위한 실험결과에서 기존의 방법들에 비해서 향상된 인식결과를 보임을 확인하였다. In this paper, we propose the MRS p:Ittern classification techniques by the fusion scheme based on the SpPCA and MLP. A conventional PCA teclulique for the dimension reduction has the problem that it can't find a optimal transformation matrix if the property of input data is nonlinear. To overcome this drawback we extract features by the SpPCA technique which use the local patterns rather than whole patterns. In a next classification step, individual classifier based on MLP calculates the similarity of each class for local features. Finally, MRS patterns is classified by the fusion scheme to effectively combine the individual information. As the simulation results to verify the effectiveness, the proposed method showed more improved classification results than conventional methods.
송창규(Chang Kyu Song),이후상(Husang Lee),박천홍(Chun Hong Park),이호철(Hocheol Lee) 한국생산제조학회 2007 한국공작기계학회 춘계학술대회논문집 Vol.2007 No.-
The large optics in the telescope need an extreme level of both form accuracy and surface roughness such as sub-nanometer. To get the large optics of high quality surface, our strategic approach is to make a hybrid and complex machine with grinding, polishing, and measurement function. Therefore, the machine is being equipped with the ELID grinding and the computer-controlled polishing and the optics interferometer module to manufacture a large optics in short cycle. Its current goal is pursuing to acquire a large mirror optics of diameter 1.5m and final form accuracy is λ/10(50㎚) rms. In this paper to show our first result, we described machine design process by the error budget analysis and the conceptual arrangement of machine modules and machine structure and positioning performance was experimentally verified.
송창규(Chang-kyu Song),김영진(Young-jin Kim),전명근(Myung-geun Chun) 한국정보보호학회 2021 정보보호학회논문지 Vol.31 No.4
바이오인식은 각 개인의 신체적, 생리적, 행동적 특성을 자동화된 장치로 측정하여 이를 등록한 후, 개인을 식별하거나 인증하는 기술을 말한다. 그런데, 여기서 사용되는 바이오인식 정보는 개인을 식별할 수 있으므로 개인정보에 해당된다. 따라서, 이것이 유출되거나 오용되었을 때 정보주체의 프라이버시에 부정적인 영향을 미치게 된다. 본 논문에서는 바이오인식 정보와 관련된 국내의 법적 현황을 살펴보고 이와 관련된 침해현황을 살펴본다. 이어서 대표적인 바이오인식 응용 모델을 도출하고, 각각에 대한 취약점 및 대책 방안을 논의한다. 최종적으로 바이오인식 시스템의 개발자와 서비스제공자를 위해 바이오인식 정보의 보호를 위한 수칙을 제시한다. Biometric recognition refers to a technology that identifies or verifies an individual after registering each individual’s physical, physiological, and behavioral characteristics with an automated device. However, the biometric data used here corresponds to personal information since it can identify an individual. Therefore, when it is compromised or misused, it negatively affects the privacy of the data subject. In this paper, we review the current status of domestic laws related to biometric information and the status of infringements related to this. And then, some biometric application models are derived and vulnerabilities and countermeasures for each model are discussed. Finally, for the developer and service provider of the biometric system, protection guidance is presented.
송창규(Chang-Kyu Song),권석영(Seok-Young Kwon),전명근(Myung-Geun Chun) 한국지능시스템학회 2007 한국지능시스템학회논문지 Vol.17 No.3
컨투어렛 변환은 2차원의 웨이블렛 변환을 확장한 개념으로 다중스케일과 방향성필터뱅크를 이용한다. 이러한 컨투어렛 변환은 웨이블렛 변환의 특징인 다중스케일과 시간-주파수의 지역적 특성뿐만 아니라 방향성분에 대해서도 풍부한 정보를 얻을 수 있는 장점을 가지고 있다. 본 논문에서는 컨투어렛 변환과 주성분분석기법을 이용하는 융합기법에 의한 얼굴인식 시스템을 제안한다. 제안된 방법은 먼저 컨투어렛 변환에 의해 얼굴영상을 방향성 부대역 영상으로 분할한 후, 주성분분석기법을 이용하여 방향성분별로 분할된 각각의 부영상에 대하여 특징벡터를 산출한다. 그리고 최종 단계에서는 각각의 대역별로 산출된 매칭도를 효과적으로 융합할 수 있는 융합기법을 이용하여 얼굴인식을 수행한다. 제안된 방법의 타당성을 보이기 위해 ORL 얼굴영상과 CBNU 얼굴영상을 대상으로 실험한 결과 기존 방법인 PCA나 웨이블렛 변환을 이용한 방법에 비해 향상된 인식 성능을 보임을 확인할 수 있었다. Contourlet transform is an extention of the wavelet transform in two dimensions using the multiscale and directional filter banks. The contourlet transform has the advantages of multiscale and time-frequency-localization properties of wavelets, but also provides a high degree of directionality. In this paper, we propose a face recognition system based on fusion methods using contourlet transform and PCA. After decomposing a face image into directional subband images by contourlet, features are obtained in each subband by PCA. Finally, face recognition is performed by fusion technique that effectively combines similarities calculated respectively in each local subband. To show the effectiveness of the proposed method, we performed experiments for ORL and CENU dataset, and then we obtained better recognition performance in comparison with the results produced by conventional methods.
송창규(Chang Kyu Song),황주호(Jooho Hwang),박천홍(Chun Hong Park) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.5
Micro machining is more widely used especially in IT sector. Light guide plate(LGP) and prism sheet of back light unit(BLU) for LCD display are famous applications. As LCD size is more lager, molds of LGP and prism sheet become lager too. There are three type of machining system for micro machining on large surface, grooving machine, 3d micro machine and ultra precision roll lathe. In this paper stae-of-the-art of this three type machines are introduced.
다축 기계장비의 물리적 모델링에 의한 동특성 시뮬레이션
송창규(Chang Kyu Song) 대한기계학회 2013 대한기계학회 춘추학술대회 Vol.2013 No.12
We present a dynamic model and simulation results of a 4-axis machine tool in this paper. The dynamic model has been built on Matlab/Simulink and SimMechanics. The simulation model treats the moving table as a 6 degrees-offreedom rigid body and considers the stiffness and damping of motion guide blocks as well as sensor locations. Instead of using equations of motion which are inevitably complicated to deal with multibody dynamics of the 4-axis machine.