http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
채널이 수막으로 완전히 덮여 있는 증발식 냉각기에서의 열 및 물질전달 해석
송찬호,이대영,노승탁,Song, Chan-Ho,Lee, Dae-Yeong,No, Seung-Tak 대한기계학회 2001 大韓機械學會論文集B Vol.25 No.12
A theoretical analysis on the heat and mass transfer in an evaporative cooler is presented in this work. The evaporative cooler is modeled as a channel filled with porous media the interstitial surface of which is covered by thin water film. Assuming that the Lewis number is unity and the water vapor saturation curve is linear, exact solutions to the energy and vapor concentration equations are obtained. Based on the exact solutions, the characteristics of the heat and mass transfer in the evaporative cooler are investigated. The comparison of the cooling performance between the evaporative cooler and the usual sensible heat exchanger is also carried out. Obviously, the evaporative heat exchanger shows better cooling performance than the sensible heat exchanger. This is due to the latent heat of water vaporization, which results in apparent increases both in the interstitial heat transfer coefficient and the specific heat of the air stream in the evaporative cooler.
송찬호,Song, Chan-Ho 한국방위산업진흥회 1992 國防과 技術 Vol.- No.159
현존하는 유도탄은 대륙간탄도탄(ICBM)과 같은 유도탄(Ballistic Missile)에서부터 비행기에 흡사한 순항유도탄(Cruise Missile)에 이르기까지 종류가 다양하다. 유도탄은 사용목적에 따라 전략유도탄과 전술유도탄으로 구분되는데, 전략유도탄은 핵탄두를 갖고 있으며 전쟁억제를 목적으로 하고 전술유도탄은 실전에 사용하기 위해 만들어진 것이다. 이 글에서는 주로 전술유도탄을 중심으로 흔히 오토파일럿(Automatic Pilot)이라 부르는 기술현황과 그 개발추세를 살펴보기로 한다
송찬호(Chan-Ho Song) 한국정보과학회 2004 한국정보과학회 학술발표논문집 Vol.31 No.1A
AODV나 DSR과 같은 Reactive 라우팅 방식은 트래픽이 발생되는 시점에서 경로를 탐색하는 방법으로서 최적 메시지 전송 경로가 유효하다면 트래픽의 증가와 과도한 에너지 소비를 고려하지 않고 계속적인 동일 전송 경로의 사용으로 인해 특정 노드에 대하여 에너지 소모가 심화될 뿐만 아니라 전송지연이 발생된다. 본 논문에서는 과중한 트래픽 상태를 분산 시켜 전체 네트워크의 균형적인 에너지 소비를 위하여 Reactive 라우팅 방법에서 특정 노드의 트래픽 상태, 에너지 상태, 라우팅 시간을 고려한 노드 상태 기반 부하 분산 방법(NSLB : Node Status-based Load Balancing Method)을 제안한다.
인코넬 617을 이용한 고온고압용 미세채널 열교환기 제작기술에 관한 연구
송찬호(Chan Ho Song),조일환(Il Hwan Cho),오동욱(Dong-Wook Oh),윤석호(Seok Ho Yoon),박인섭(Seop In Park),최준석(Joon Seok Choi),박상진(Sang Jin Park) 대한설비공학회 2013 대한설비공학회 학술발표대회논문집 Vol.2013 No.11
This study presents a manufacturing technology for high temperature and high pressure micro channel heat exchanger using inconel 617. The channels N & I type in the plate were made by mechanical process and piled up by turns. The bonding evaluations were performed by thermal property and tensile stress test. Parametric studies for bonding temperature and pressure were carried out. The results showed reasonable values for making heat exchanger product. In the future we will make a heat exchanger product with header and test its reliability and performance.
인버터 타입 히트펌프 보일러에 관한 성능비교에 관한 연구
송찬호(Chan Ho Song),김욱중(Ook-joong Kim),장호영(Ho Young Jang),윤석호(Seok Ho Yoon) 대한설비공학회 2013 대한설비공학회 학술발표대회논문집 Vol.2013 No.6
The present study has been conducted for a heat pump system for hot water supply using air as a heat source. Heat pump with inverter compressor was compared with fixed compressor type system and KSCOP conditions were applied to the system. Sensitivity analysis in test conditions was carried out. It is found that inverter type system can deal with the various load when compared with fixed type system, and system design at the outdoor condition 2/1℃ is important.