http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
송병욱,이해영,Song, Byeong-Uk,Lee, Hae-Yeong 대한전자공학회 2002 電子工學會論文誌-TC (Telecommunications) Vol.39 No.2
본 논문에서는 고품질 본드와이어 집적 트랜스포머를 제안하고 제작하였다. 본드와이어 트랜스포머는 본드와이어의 넓은 단면적으로 인하여 도체손실이 작으며 수직적인 구조로 인해 기판효과를 감소시킬 수 있으므로 적은 기생 캐패시턴스 값을 갖는다 또한 자동화된 와이어 본딩장비로 쉽게 제작 가능하다. 제작된 본드와이어 트랜스포머의 전기적 특성을 나선형 트랜스포머 비교하였다. 고품질 본드와이어 집적 트랜스포머는 RFIC와 MMIC의 MIXER, 평형 증폭기, VCO, LNA등 다양한 회로에 적용되어 전체 성능향상에 기여할것으로 기대된다. In this paper, a high-quality integrated transformer using bondwires is proposed and fabricated. The bondwire transformer inherently has low conductor loss due to wide cross-section and small parasitic capacitance because the vertical placement of the bondwire loop separates from substrate and effectively reduces the substrate effects. It can be fabricated easily by used of the modern automatic wirebonding technology. The electrical characteristics of the fabricated transformers are compared with those of the spiral transformer It is expected that the bondwire transformer can improve the performance for RFIC and MMIC applied to a variety of application, for example, Mixer, Balanced Amplifier, VCO, and LNA.
송병욱,이해영,Song, Byeong-Uk,Lee, Hae-Yeong 대한전자공학회 2000 電子工學會論文誌-TC (Telecommunications) Vol.37 No.3
In this paper, vortical integrated transformers using bondwires are proposed and characterized for MMIC's (Monolithic Microwave Integrated Circuits) In a wide range of frequencies (1∼20 GHz), where full-wave analysis by the FEM (Finite Element Method) was adopted. The electrical characteristics of the proposed transformers are compared with those of the spiral transformer. We extracted mutual inductances from S -parameters. The vertical transformers using bondwires have not only low insertion loss but also reduce parasitic capacitances and dielectric loss due to their separation from substrates. It can be fabricated easily by used of the modern automatic wirebonding technology. It is expected that the proposed transformers are to improve the performance of MMIC's applied to impedance matching, and phase shifting circuits. 본 논문에서는 본딩와이어를 이용한 수직형 트랜스포머를 제안하고, FEM (Finite Element Method)을 이용한 완전 해석법 (Full-waye analysis)으로 20 GHz 까지 해석하였다 나선형 트랜스포머와 전기적인 특성을 비교하였고, 구해진 S-파라미터로부터 상호 인덕턴스를 추출하였다. 본딩와이어를 이용한 트랜스포머는 낮은 삽입손실을 가지며, 본딩와이어의 대부분이 손실이 없는 공기중에 위치하므로 정전용량 및 유전 손실을 줄일 수 있는 구조이다. 또한, 자동화된 와이어 본딩 장비를 이용하여 쉽게 제작할 수 있다. 본딩와이어를 이용한 트랜스포머는 Impedance matching, Phase shifting등 다양한 범위에 응용되어 MMIC의 성능 향상을 이룰 것으로 기대된다.
골절치료용 Intrelocking Nail System의 최적설계를 위한 유한요소법 응용
송병욱(Byeong-Uk Song),민경탁(Kyung-Tak Min),서태일(Tea-Il Seo),이정원(Jeong-Won Lee) 한국생산제조학회 2011 한국생산제조시스템학회 학술발표대회 논문집 Vol.2011 No.4
The active trauma system consists of several shaped bone plates and implant screws for fixation of fractured human bones with various manual instruments allowing to handle them. Interlocking nails have to be designed with suitable shapes. In order to verify whether interlocking nails were well designed, a series of bending tests. However optimized shapes of interlocking nails have to be determined before unnecessary number of bending tests. For this purpose FEM(Finite Elements Method) was applied during design process which allows us to investigate the bending strengths of interlocking nails. Based on FEM results, dimensions of interlocking nails were optimized in order to be suitably rigid without actual bending test.
유한요소법을 이용한 One Touch Clamp 설계 및 개발에 관한 연구
송병욱(Byeong-Uk Song),서금희(Keum-Hee Seo),임용석(Yong-Seok Lim),신용욱(Yong-Wook Shin),이정원(Jung-won Lee) (사)한국CDE학회 2012 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2012 No.2
본 논문에서는 유한요소법을 이용하여 차량용 One Touch Clamp 의 개발에 관하여 연구하였다. 유한요소법을 이용한 해석을 진행하기에 앞서 One Touch Clamp 의 모델링을 하였고, 인장 실험을 통하여 One Touch Clamp 의 물성치를 얻어 이를 바탕으로 유한요소법을 이용하여 응력분포도 확인으로 Clamp 의 안정성을 확보하였다. 또한 실제 차량의 주행조건과 동일한 조건에서 Clamp 의 조임력을 통한 누수 압력을 검토하여 Clamp 에 Leak 의 발생여부 및 누수여부를 확인하여 Cla,p 의 이상유무를 판단하여 개발을 진행하였다.