http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
소원욱,박승빈,김광제,문상진 ( Won Wook So,Seung Bin Park,Kwang Je Kim,Sang Jin Moon ) 한국공업화학회 1997 응용화학 Vol.1 No.1
Nanosize titania colloidal solutions were prepared by the hydrolysis and condensation of titaniumtetraisopropoxide(TTIP) at room temperature. Hydrothermal treatment of this titania sol was carried out in an autoclave. As the H^+/TTIP mole ratio decreased and H₂O/TTIP mole ratio increased, stable sol was formed. The size and crystallinity remained unchanged after hydrothermal treatment of the stable sol at between 160 and 240℃. however, hydrothermal treatment of unstable sol produced rod-like particles and the crystallinity was changed from anatase to rutile.
레이다 수신기용 X-밴드 주파수 합성기의 저 위상잡음 설계 및 구현
소원욱,강연덕,이택경 한국항행학회 1998 韓國航行學會論文誌 Vol.2 No.1
마그네트론을 이용하는 레이다에서 송신 주파수의 변화물 감지하여 안정된 중간주파수를 발생하기 위해서는 STALO(Stable Local Oscillator)로서 AFC(Automatic Frequency Control)에 의해 출력주파수를 조정할 수 있는 주파수 합성기(Frequency Synthesizer)가 이용된다. 본 논문에서는 8.4GHz~9.7GHz의 X-밴드 주파수 합성기를 단일 루우프 구조의 간접 주파수 합성방식으로 설계하고 제작하였다. 고속 디지털 PLL 칩에 의하여 위상비교를 하고, 저 위상잡음을 구현하기 위한 여파기를 설계하였다. 기준신호와 VCO, 주파수 분주기, 여파기 등의 특성에 따른 단일 루우프 주파수 합성기의 위상잡음 성능을 해석하고, 위상잡음이 최소가 되도록 설계하여 측정치와 비교하였다. In the coherent-on-receiver radar system using the magnetron source, frequency synthesizer is employed as a STALO(Stable Local Oscillator) to keep the intermediate frequency stable. In this paper, X-band(8.4GHz~9.7GHz) single loop frequency synthesizer is designed and implemented by an indirect frequency synthesis technique. Phase comparison is performed by a digital PLL(Phase-Locked Loop) chip and the loop filter is designed for the low phase noise. The effects of loop component characteristics on the output phase noise are analyzed for single loop structures, and the calculated results are compared with the measured data.
김광한,소원욱,박인준,문상진,이수복 한국공업화학회 2003 응용화학 Vol.7 No.2
고부가치의 불소계 투광성 고분자는 반사방지 필름, 반도체 보호필름, POF(plastic optical fiber) 및 섬유 가공제 등 광관련 소재산업에 폭넓게 사용되고 있어 최근 이에 대한 연구가 활발하게 이루어지고 있다. 본 연구에서는 발연황산(SO₃/H₂SO₄)을 이용한 DCIPFB(1,2-dichloro perfluoro butyl iodide)의 산화반응에 의해 대표적인 불소계 투광성 고분자인 Cytop 중간체의 하나인 FCAF(fluorinated chloro acyl fluoride) 합성시 반응온도 등의 대표적인 실험변수에 따른 FCAF의 합성특성을 고찰하였다. 그 결과 반응온도 및 반응시간의 증가와 더불어 DCIPFB의 전환율은 증가하였으나 FCAF의 선택율은 감소하였다. 이 때 생성물의 정성 및 정량분석을 위하여 GC/MS 및 GC를 사용하였다.