http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
성환태 대한기계학회 1976 大韓機械學會誌 Vol.16 No.2
구미의 공업교육은 해석중심에서 종합에 비중을 두는 방향으로 크게 변하고 있는 것 같다. 따 라서 설계교육에 대하여도 여러 가지의 시도가 이루어지고 있으며 새로운 방향을 발견하려고 노력하고 있다. 우리나라나 일본의 경우는 전시, 전후할것없이 제도교육이나 설계교육도 거의 변화가 없다. 우리나라와같이 격봉하는 나라로서 왜 이 점만 구태농연한지 의문이다. 어떻든 울 리나라의 중화학고업의 발전육성의 모체가 종합설계기술이며 이것을 두어깨에 짊어지고 나갈 역군인 공학도의 교육이 중대함을 통감하면서 더욱 설계제도교육에 역점을 두어야 한다는 생각을 간절히 느끼며 새로운 설계제도교육의 방향으로 흐름의 동기가 되기를 기원하는 바이다.
이온질화 에 있어 확산층 및 합성층 의 생성속도 및 질소 의 활성화에너지
성환태,유봉환,조규식 대한기계학회 1984 대한기계학회논문집 Vol.8 No.5
본 연구에서는 S15C 및 S45C의 이온 질화에 있어서 확산층 및 합성층의 생성 속도를 계산하였고 이를 기초로 질소의 활성화 에너지를 구하였다. This paper deals with nitrogen diffusion velocity and activation energy in diffusion layer and compound layer in ion-nitriding, and presents observations on the effect of deformation according to nitriding methods. During the experiment the activation energy and diffusion velocity of nitrogen have been examined in S45C steel samples. It is found that the results of an investigation correspond with the theoretical data and the ion-nitriding method offers less deformation than conventional salt-bath method of nitriding.
성환태,안상욱 대한기계학회 1987 대한기계학회논문집 Vol.11 No.1
The orthogonal cutting method of the nodular graphite cast iron in the lathe turning, whose structure were formulated under two kinds of annealing conditions, has been experimentally studied and the results investigated. The various characteristics of machinabilities of the nodular cast iron, depending upon its structure, have been obtained from the results as follows. (1) As depth of cut increases, the shearing strain decreases and tend gradually to increase with increase of ferrite matrix. (2) As depth of cut increases, the shearing stress slightly decreases for P$_{1}$, but it tends to increase for both of P$_{2}$ and P$_{3}$ under the same condition. The annealing effect in the process of light cutting was found to be greater than heavy cutting. (3) The cutting energy slightly decreases with the increassing of the depth of cut, and the effect of decreasing the cutting energy by the annealing is higer the light cutting than the heavy cutting. (4) The cutting equations as follow. P$_{1}$ : 2.phi.+1.58(.betha.-alpha.)=92 deg. P$_{2}$ : 2.phi.+1.40(.betha.-alpha.)=84 deg. P$_{3}$ : 2.phi.+1.37(.betha.-alpha.)=82 deg. (5) The machining constants for P$_{1}$, P$_{2}$ and P$_{3}$ which are the test-pieces in this study and classified according to the containing quantity of ferrite matrix given respectively in 78deg., 70 deg., and 68 deg. From these it can be known that the machining constants slightly decreases with increasing of the quantity of ferrite matrix contained in the nodular graphite cast iron. 본 논문에서는 구상흑연주철을 어니일링하여 퍼라이트기지와 페라이트기지의 양을 조정하므로서 절삭성이 어느 정도 향상되는가를 실험검토하였다. 제일보에서는 퍼라이트기지가 페라이트기지로 변화할 때에 절삭비, 전단각 및 절삭저항에 어떠한 영 향을 주는가를 검토하였고, 본보에서는 기지조직의 변화가 전단응력 및 절삭에너지에 미치는 영향을 검토하였으며 각조직에 대한 절삭방정식과 절삭정수를 결정하였다.