http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
태양열 이용 비프레온계 $CF_3CH_2F$(R-134a)적용 열펌프시스템에 의한 학교교실 난방에 관한 연구(II)
선경호,정현채,김기선,Sun, Kyung-Ho,Jung, Hyun-Chai,Kim, Ki-Sun 한국태양에너지학회 1997 한국태양에너지학회 논문집 Vol.17 No.2
본 연구는 R-12($CF_2Cl_2F$) 대체냉매인 R-134a($CF_3CH_2F$) 적용 태양열 열펌프시스템에 의하여 학교교실($20{\sim}25$평형)이나 학교 화장실($13{\sim}17$평형)의 난방에 관한 것으로서 대체냉매 적용할 때 시스템의 안정성과 성능에 관해 실험되어졌다. 학교교실 난방을 위한 방법 중에서 온풍난방을 택하여 실험하였는데 대체냉매 적용 실제와 모형시스템의 난방성능을 비교 해석하였다. 이 결과를 근거로 R-22($CHClF_2$)와 그 대체냉매들에 대한 성능을 예측하였다. 서울지방 봄 가을철, 겨울철의 외기 온도에서 실내온도가 $18{\sim}20^{\circ}C,\;23{\sim}25^{\circ}C$로 유지할 수 있도록 설계 제작되었다. The goal of this paper is to measure and compare the performance of solar heat pump for school classroom heating. To accomplish the goal, solar heat pump with alumium roll bond type evaporator and indoor heat exchanger(condenser) was built and fully instrumented with thermocouples and pressure transducers etc. The test results showed that the COP and capacity of R-134a($CF_3CH_2F$) were higher than those of R-12($CF_2Cl_2$). The solar heat pump system for room heating was designed to show the best efficiency that the room temperature make $18{\sim}20^{\circ}C\;and\;23{\sim}25^{\circ}C$ in Seoul during November, December, and January.
[001] 및 [011] 방향 분극의 압전 단결정 PMN-PZT 를 이용한 진동 에너지 수확 특성
선경호(Kyung Ho Sun),김영철(Young-Cheol Kim),김재은(Jae Eun Kim) 한국소음진동공학회 2014 한국소음진동공학회 학술대회논문집 Vol.2014 No.10
This work investigated the electromechanical performance of a cantilevered vibration energy harvester incorporating the single crystal PMN-PZT, manufactured with the most recent technology of solid-state single crystal growth. Single crystal PMN-PZTs with two different crystallographic axes such as [011] and [001] were considered. For the [011] orientation, because material properties such as the stiffness, piezoelectric strain coefficients are not the same in the directions normal to the crystallographic axis, the effects of the transversely anisotropy on the magnitude and frequency bandwidth of output power were also analyzed.
태양열 이용 열펌프 시스템에 의한 태양열 연구실 난방에 관한 연구 (Ⅰ)
선경호(Kyung-ho Sun),정현채(Hyun-chai Jung) 한국태양에너지학회 1994 한국태양에너지학회 논문집 Vol.14 No.3
약 6평 규모의 실내의 온수 순환 난방에 적용될 수 있는 최적 설계조건 하에 제작 설치된 신개발 태양열 시스템의 열적 성능과 실내의 난방효과를 분석한 결과, 신개발 태양열 시스템의 온수순환 난방 방법이 실내난방에 가능함을 확인했다. 본 실험에서 사용된 신개발 태양열 난방시스템은 서울지방 가을철(10월과 11월)의 외기온도에서 실내온도가 18℃~20℃로 되는 범위내에서 최대의 효율을 나타내도록 설계하였다. A study discovered the possibility that new solar hot water circulating method make the room heat. A study proved the best conditions to use hot water circulating system in the room that is about 20㎡, The new system is designed to show the best efficiency that the room temperature make l8~20℃ in Seoul during November and December.
최대 비틀림 파 발생을 위한 자기변형 패치 형상의 위상최적화
선경호(Kyung Ho Sun),조승현(Seung Hyun Cho),김윤영(Yoon Young Kim) 대한기계학회 2007 대한기계학회 춘추학술대회 Vol.2007 No.10
This research is concerned with the topology design optimization of a magnetostrictive patch with the consideration of the coupling between magnetic field and mechanical deformation. Earlier investigations consider the optimization of magnetic systems only. Because the maximization of the torsional wave generated by the patch is to be achieved, the shear stress at the target location of the test specimen where the patch is bonded is used as the objective function. Therefore, not only the patch shape but also patch bonding status must be simultaneously solved in the present problem. This requires the use of two design variables at every finite element discretizing a given design space. The numerical results obtained by the present investigation were found to agree well with the earlier experimental results.
R-22와 R-407C 냉매 적용 학교교실 난방용 태양열 열펌프시스템의 태양열 집열기 및 팽창장치의 성능
선경호(Kyung Ho Sun),정현채(Hyun Chai Jung),김기선(Ki Sun Kim),김용권(Yong Gwon Kim) 한국태양에너지학회 1998 한국태양에너지학회 학술대회논문집 Vol.- No.-
본 연구는 20~30평 규모의 학교교실을 난방하기 위하여 태양열 열펌프시스템의 열 성능을 향상시키고자 하였고 이를 위하여 냉매의 종류에 따른 태양열 집열기와 팽창시스템으로서 HCFC 대체냉매 교체에 따른 열역학적 물성치를 측정하였다. 또 팽창부 성능실험에서는 기존 자동팽창밸브를 사용하는 대신에 모세관을 사용하여 길이, 직경 등과 난방부하에 따른 열교환기와 태양열 집열기의 크기를 최적화하기 위하여 팽창장치 입ㆍ출구에서 냉매의 압력, 온도, 유량 등을 측정하였다. R-407C, R-134a, R-22냉매의 종류에 따른 태양열 시스템의 열성능향상효과를 확인하기 위하여 각 냉매의 최적 충전량을 과열도와 과냉도에 따라 측정하였다. This study was perform to investigate performance characteristics in a expansion part and solar panel of solar heat pump system for HCFC-22 and their other alternative mixtures. Mass flowrates, temperatures, and pressures were measured for several cases of condensing temperature and degree of subcooling at expansion tube inlet. Four expansion tubes with inner diameter of 1.2㎜ and 2.0㎜ and length of 1.0m and 2.0m were tested. Inlet conditions of expansion part were examined for condensing pressures which correspond to condensing temperature ranging from 40℃ to 50℃, for degree of subcooling ranging from 1℃ to 18℃. The results for HCFC-22 were compared with those for HFC-32/125/134a(23/25/52) with similar inlet conditions of test section.