http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
서수형,주경,오근호,Seo, Soo-Hyung,Joo, Kyoung,Auh, Keun-Ho 한국결정성장학회 1998 韓國結晶成長學會誌 Vol.8 No.3
형석$(CaF_2)$ 단결정 내부에 형성되는 다양한 결함에 대하여 현미경관찰, 성분분석 및 투과율분석을 하고 광투과에 미치는 영향을 고찰하였다. 내부 cavity의 종류로는 bubble과 결정면을 포함하는 공공형태의 negative crystals이 있으며, 특히 negative crystals이 결정에 고루 퍼져있는 경우, UV-Visible 파장영역에서 약 3%의 투과율 저하현상이 나타났다. 또한, 결정내부의 석출물은 주로 내부 cavite에 형성됨을 WDX 분석을 통하여 확인할 수 있었다. Violet colored 결정은 non-colored 결정에 비하여 전위밀도가 3배 정도 높았고, 성분분석 F이온이 적은 Ca와 F의 원자비가 나타내었다. 이러한 결과로 F이온의 부족으로 인하여 형성된 violet 색상이 발생되었음을 간접적으로 알 수 있었다. The internal defects in $(CaF_2)$ single crystal were characterized by the observation of optical microscopy, the element analysis and the transmittance analysis. In bubble and negative crystal which are composed to crystal plane of (100) and (111), the spread negative crystal in $(CaF_2)$ crystal gave an effect of low transmittance. The precipitates formed in bubble as internal cavities were analyzed by using WDX. Violet colored-crystal had higher a dislocation density than non-colored crystal, and the atomic ratio between Ca and F changed by poor F ion. In this result, we could determine indirectly that violet color was occurred by poor F ion.
고주파 유도 플라즈마를 이용한 산화 알루미늄 초미세분말 제조
서수형,신건철 한국결정성장학회 1995 韓國結晶成長學會誌 Vol.5 No.3
초고온(5000K 이상)의 고주파 유도 플라즈마(ICP)를 열원으로 사용하여 $AlCl_3$와 $Al_2(SO_4)_3$로부터 $Al_2O_3$ 초미세분말을 합성하였다. 각각 합성된 $Al_2O_3$ 미분말의 결정상은 모두${\alpha} - group({\alpha}, {wdelta}, {\theta})$의 상이었으며, 평균입경 20 nm 내외의 좁은 입도 분포를 가지는 미분말이 형성되었다. ICP tail flame 중간부(X = 500 mm)에서 MgO polycrystal plate위에 부착된 응집플록, whisker 및 판형의 형태를 통 해 기상-고상반응에 의한 성장과 입자간 소결현상을 제안 할 수 있었다. 그리고 위의 결과들로부터 spray-ICP 반응기 내에서의 $Al_2O_3$미 분말 형성과정을 제안하였다. Ultrafine TEX>$Al_2O_3$</TEX> powders were prepared from $AlCl_3$ and $Al_2(SO_4)_3$3 by using inductively coupled plasma (lCP) of ultrahigh temperature (above 5000 K) in heat source. The prepared $Al_2O_3$ powders had ${\alpha} - group ({\alpha}, {wdelta} ;and; {\theta})$ phase, a narrow size distribution and around 20 nm in meansize. It could be suggested that gas - solid reaction growth and interparticle sintering occured at the center of ICP tail flame (X = 500 mm) through the results of deposited aggregates - flock, whisker and platy on MgO polycrystal plate. And the formation mechanism of $Al_2O_3$ powders In spray - ICP reactor were described from upper results.
초음파 분무 열분해법에 의한 ZnO 합성의 이론과 실제
서수형,신건철 한국결정성장학회 1995 韓國結晶成長學會誌 Vol.5 No.1
초음파 분무기에 의해 분무된 질산아연 염($Zn(NO_3)_2$) 용액(0.5M)의 에어로졸 거동과 분포에 대한 실제 실험 결과는 computer simulation 결과와 일치하였다. 즉, 반응관(thermophoresis)에 의해 반응관 중심부로 이동하였다. 또한 에어로졸의 농도 분포는 축길이가 증가함에 따라 반응관 중심쪽에 높았다. 합성된 ZnO 입자 중에서 반응과 중심에서는 볼 수 없었던 깨진 형태의 shell-like aggregates가 반응관 벽근처에서 관찰되었으며, 입자의 크기는 반응관 벽쪽($ 1.2 {\mu\textrm{m}$)이 중심쪽($0.9 {\mu\textrm{m}$)보다 컸다. Abstract The experimental results which is the aerosols behavior and distribution of atomized zinc nitrate ($Zn(NO_3)_2$) solution (0.5 M) by ultrasonic vibrator were in accord with the computer simulations. i.e., most aerosols passing through the reactor (hot zone) moved toward the center of reactor by thermophoresis as the axis of reactor increase. Also, the distribution of aerosols concentration was high at the center of reactor as the axis increase. Among the synthesized ZnO particles, shell-like aggregates of fracture type which could not see at the center of reactor were observed at near the wall of reactor, and the particle size ($ 1.2 {\mu\textrm{m}$) of near the wall was larger than that ($0.9 {\mu\textrm{m}$) of the center.
Vacuum-Bridgman법에 의한 UV grade 형석$(CaF_2)$단결정 성장
서수형,주경,오근호,Seo, Soo-Hyung,Joo, Kyoung,Auh, Keun-Ho 한국결정성장학회 1998 한국결정성장학회지 Vol.8 No.3
대구경(직경 4inch이상) $CaF_2$ 단결정성장을 위하여 vacuum-Bridgman 장치를 구성하였으며, 성장속도 2mm/hr, 성장온도구배 $12^{\circ}C$/cm의 조건하에서 성장한 $CaF_2$ 단결정은 우수한 물성을 갖는 것으로 분석되었다. 우산형(umbrella shape)의 Mo thermal reflector를 사용한 경우에 polycrystalline으로의 성장을 제거할 수 있었다. 성장우선방위는 (111)면이었으며, 분말 XRD법에 의한 peak로부터 $5.460\AA$의 격자상수를 구하였다. 또한 XRD분석에 의하면 제2상은 형성되지 않았으며, EPD값은 $1.4{\times}10^4 \textrm{cm}^{-2}$이었다. 성장된 결정은 UV영역의 광학부품용도로 사용하기에 적합한 투과율 91%이상의 특성을 나타내었다. The vacuum-Bridgman equipment for large size diameter (4 inch more over) crystal growth was organized simply and the $CaF_2$ single crystal which was grown in the conditions of growth rate of 2mm/hr, freezing temperature gradient of $12^{\circ}C$/cm, have analyzed to keep excellent properties. Using Mo thermal reflector of umbrella shape, it could be eliminated the formation of polycrystalline. The preferential growth direction was (111) and the calculated lattice parameter was $5.460 \AA$ by XRD peaks. The secondary phases, also, was not formed by means of powder-XRD analysis. The value of EPD is $1.4{\times}10^4 \textrm{cm}^{-2}$ and the optical quality, which is the transmittance is 91% up in UV region, is suitable for optical components of UV applications.
고품질의 직경 6 inch 형석($CaF_2$)단결정 성장을 위한 poly-grain 및 내부 cavity제어
서수형,주경,오근호,Seo, Soo-Hyung,Joo, Kyoung,Auh, Keun-Ho 한국결정성장학회 1998 한국결정성장학회지 Vol.8 No.4
We suggested the new method of thermal screen in Bridgman-Stockbarger method to control the polygrain, the internal cavities and solid-liquid (SL) interface. $CaF_2$ single crystal of 6 inch was grown perfectly when we adopted to use a graphite pipe and a ceramic warmer in the conditions of growth rate 2 mm/hr, vertical temperature of $14^{\circ}C$ for freezing and temperature of $1324^{\circ}C$ at conical tip of crucible. The light scattering phenomena occurred by internal cavities were controlled as decreasing the freezing rate to 2 mm/hr and/or as adopting the rotation of melt (7 rpm). Bridgman-Stockbarger법에서 thermal screen의 역할을 하는 새로운 방법을 6inch 형석(CaF2) 단결정성장을 위하여 고안하였다. 본 방법으로 poly-grain으로의 성장과 내부 cavity, 그리고 solid-liquid(SL) interface를 제어할 수 있었다. Graphite pipe와 ceramic warmer를 사용하여 성장한 6inch의 CaF2 결정은 완전한 단결정으로 성장하였다. 이때의 조건은 2mm/hr의 성장속도, 성장구역에서의 $14^{\circ}C$/cm의 온도구배, 그리고 도가니의 conical tip에서 $1324^{\circ}C$의 온도를 나타내었다. 내부 cavity에 의해 발생되는 light scattering 현상은 성장속도를 감소시키거나 융액을 회전함으로써 제어할 수 있었다.