A Study on Car Lighting System using Open-Source Controller applicable to Construction Site Trailer Vehicles

비나야감 마리아판,이민우,차재상,이상운 한국ITS학회 2018 한국ITS학회 학술대회 Vol.2018 No.04

In these days, the lighting system integrated with various application are needed to be dynamic and adaptive with lighting data rate control, and the data transmission methods are being studied to use effectively in many systems. The progressive development of lighting system extends the use of rear light of various vehicles to communication medium for transmission of data in addition to luminary function in driving with rear light turned on. The vehicles are designed to be operated with different speed and different light luminary devices, because the transmission method should be standardized to use the vehicle rear light system based data transmission for all kinds of vehicles. This paper proposes open-source controller applicable to construction site trailer vehicles as an lighting transmitter to transmit data on optical channel medium connected on vehicle. In this approach, vehicle transmit data without adding any additional resources by connecting micro-controller and the receiver decodes the data. The vehicle rear light based transmission system model can be operated on data rate from tens of b/s to Kb/s. Acknowledgement This research was supported by the MSIT (Ministry of Science and ICT Korea, under the ITRC (Information Technology Research Center) support program (IITP-2018-2016-0-00311) supervised by the IITP(Institute for Information & communications Technology Promotion). Reference [1] “IEEE standard for local and metropolitan area networks-part 15.7: Short-range wireless optical communication using visible light,” in IEEE Standard 802.15.7-2011, pages 1-309, Sept 2011. [2] C. Gavrincea, J. Baranda, and P. Henarejos, “Rapid prototyping of standard-compliant visible light communications system,” in IEEE Communications Magazine, 52(7):80-87, July 2014.

스마트 디바이스 기반 ECG 감지 IoT 응용 서비스에 관한 연구

마리아판 비나야감,이승연,이정훈,이주영,차재상 한국위성정보통신학회 2016 한국위성정보통신학회논문지 Vol.11 No.3

의료 센터에서 데이터 분석과 스마트폰 어플리케이션 권한을 부여함으로써 사물 인터넷 (IoT)은 환자 중심의 의료 관찰과 관리에서 대혁변을 일으킬 것이다. 네트워크 연결은 개인 의료 서비스에서 IoT 의학 장치로 부터 건강을 관찰하는 스마트폰으로부터 진료받는 사람들의 건강 정보를 모으기 위한 기본 요구사항이다. 스마트폰에 설치된 IoT 환경은 매우 효과적이고 이것은 사회 기반 시설을 필요로 하지 않는다. 본 논문은 ECG 캡처링에 영향을 주지 않기 위해 스마트폰이 개인 IoT 아키텍처를 효율적으로 사용하는 것을 보여준다. 적응 IoT 의료 장치 관문은 클라우드 구성에 관한 대용량을 가진 개인 의료 서비스에 사용된다. 이 접근법에서, 스마트폰 카메라는 개인 ECG 파형을 추출하기 위해 사용된 이미지 기술을 기반으로 하고, 그것을 IoT 아키텍처를 사용한 대용량 저장 연결에 근거한 클라우드로 보낸다. 정교해진 알고리즘은 스마트폰이나 테블릿 카메라로 부터 찍힌 얼굴이미지로 부터 효율적인 ECG 등록 을 직접 가능할 수 있는 여지를 준다. 이 심도있는 기술은 아마 적절한 기능 강화들이 소개된 후에 개인 의료 서비스를 관찰하는데 있어서 특별한 가치를 가질 것이다. Internet of things (IoT) is revolutionizing in the patient-Centered medical monitoring and management by authorizing the Smartphone application and data analysis with medical centers. The network connectivity is basic requirement to collect the observed human beings’ health information from Smartphone to monitor the health from IoT medical devices in personal healthcare. The IoT environment built in Smartphone is very effective and does not demand infrastructure. This paper presents the smart phone deployed personal IoT architecture for Non-Invasive ECG Capturing. The adaptable IoT medical device cum Gateway is used for personal healthcare with big data storage on cloud configuration. In this approach, the Smartphone camera based imaging technique used to extract the personal ECG waveform and forward it to the cloud based big data storage connectivity using IoT architecture. Elaborated algorithm allows for efficient ECG registration directly from face image captured from Smartphone or Tablet camera. The profound technique may have an exceptional value in monitoring personal healthcare after adequate enhancements are introduced.

Smart Device based ECG Sensing IoT Applications

마리아판 비나야감,이승연,이정훈,이주영,차재상 사단법인 한국위성정보통신학회 2016 한국위성정보통신학회논문지 Vol.11 No.3

Internet of things (IoT) is revolutionizing in the patient-Centered medical monitoring and management by authorizing the Smartphone application and data analysis with medical centers. The network connectivity is basic requirement to collect the observed human beings’ health information from Smartphone to monitor the health from IoT medical devices in personal healthcare. The IoT environment built in Smartphone is very effective and does not demand infrastructure. This paper presents the smart phone deployed personal IoT architecture for Non-Invasive ECG Capturing. The adaptable IoT medical device cum Gateway is used for personal healthcare with big data storage on cloud configuration. In this approach, the Smartphone camera based imaging technique used to extract the personal ECG waveform and forward it to the cloud based big data storage connectivity using IoT architecture. Elaborated algorithm allows for efficient ECG registration directly from face image captured from Smartphone or Tablet camera. The profound technique may have an exceptional value in monitoring personal healthcare after adequate enhancements are introduced.

OnBoard Vision Based Object Tracking Control Stabilization Using PID Controller

마리아판 비나야감,이민우,조주필,차재상 국제문화기술진흥원 2016 International Journal of Advanced Culture Technolo Vol.4 No.4

In this paper, we propose a simple and effective vision-based tracking controller design for autonomous object tracking using multicopter. The multicopter based automatic tracking system usually unstable when the object moved so the tracking process can’t define the object position location exactly that means when the object moves, the system can’t track object suddenly along to the direction of objects movement. The system will always looking for the object from the first point or its home position. In this paper, PID control used to improve the stability of tracking system, so that the result object tracking became more stable than before, it can be seen from error of tracking. A computer vision and control strategy is applied to detect a diverse set of moving objects on Raspberry Pi based platform and Software defined PID controller design to control Yaw, Throttle, Pitch of the multicopter in real time. Finally based series of experiment results and concluded that the PID control make the tracking system become more stable in real time.

MSA-ABR을 이용한 홈 스크린 적응형 차세대 방송 서비스 연구

마리아판 비나야감,이민우,이승연,이정훈,이주영,임윤식,차재상 한국위성정보통신학회 2016 한국위성정보통신학회논문지 Vol.11 No.3

오늘날 매우 복잡한 비디오와 방송 작동들 속에서, 방송사들은 확실히 방송중이나 온라인에서 멀티스크린 시청자들에게 높은 품질 과 저지연을 방송하는데 거듭 어려움을 겪는다. 적응 비트율(ABR) 프로토콜들은 인터넷비디오가 다양한 멀티스크린 장치를 가능하 게 해준다. 하지만 비디오 품질은 종종 중요하지 않고 오늘날 대형화면에 방송되고 가치 있는 선형 방송 컨텐츠에서는 받아들일 수 없다는 것이 입증될 것이다. ABR에서 미디어 정보 처리 기술은 서비스 제공자들이 제어를하고 집에 모든 스크린에 선형 비디오 서비스가 관리된 품질을 제공한다. 그리고 그것은 단일화된 IP 비디오 사회기반시설을 가진 큰 대형화면을 포함한다. 새로운 멀티스 크린 보조 ABR (MSA-ABR)은 기부 컨텐츠, 가상 속에 온라인 출판 서비스, 집중 클라우드 사회기반시설의 절차를 수행하는 방송 시설을 대한 멀티스크린 보조 ABR (MSA-ABR)을 기반으로하는 클라우드를 사용하도록 제안된 관리시스템을 가져다 준다. In this paper, in today’s highly complex video and broadcast operations, broadcasters are constantly challenged to reliably deliver low-latency, high-quality video to multiscreen audiences on-air and online. The Adaptive Bit Rate (ABR) protocols enable internet video to a wide range of multiscreen devices. However, video quality is often marginal and would prove unacceptable for valued linear broadcast content delivered to the Big Screen today. The Media information processing technology advances in ABR enables service providers to take control and offer quality managed linear video services to ALL screens in the home, including the Big Screen, with a single unified IP Video infrastructure. The New Multiscreen-Assisted ABR (MSA-ABR) delivery management system proposed using Cloud based multicast-assisted ABR for a broadcast facility that performs routing of contribution content and online publishing services within a virtual, centralized cloud infrastructure.

Home Screen Adaptive Next Generation Broadcasting Service using MSA-ABR

마리아판 비나야감,이민우,이승연,이정훈,이주영,임윤식,차재상 사단법인 한국위성정보통신학회 2016 한국위성정보통신학회논문지 Vol.11 No.3

In this paper, in today’s highly complex video and broadcast operations, broadcasters are constantly challenged to reliably deliver low-latency, high-quality video to multiscreen audiences on-air and online. The Adaptive Bit Rate (ABR) protocols enable internet video to a wide range of multiscreen devices. However, video quality is often marginal and would prove unacceptable for valued linear broadcast content delivered to the Big Screen today. The Media information processing technology advances in ABR enables service providers to take control and offer quality managed linear video services to ALL screens in the home, including the Big Screen, with a single unified IP Video infrastructure. The New Multiscreen-Assisted ABR (MSA-ABR) delivery management system proposed using Cloud based multicast-assisted ABR for a broadcast facility that performs routing of contribution content and online publishing services within a virtual, centralized cloud infrastructure.

MQTT based cloud-connectivity enabled Optical Wireless Light Sensory Network (OWLSN) Device Design using ESP8266 Controller

Vinayagam Mariappan(마리아판 비나야감),Joseph MFITUMUKIZA(비투무키자 조셉),Timur Khudaybergenov(쿠다르베르그노프 티무르),Min Woo Lee(이민우),Jae Sang Cha(차재상) 한국통신학회 2018 한국통신학회 학술대회논문집 Vol.2018 No.1

Light ID and HMD-AR Based Interactive Exhibition Design for Jeonju Hanok Village Immersive 3D View

민병준,비나야감 마리아판,차재상,김대영,조주필,Min, Byung-Jun,Mariappan, Vinayagam,Cha, Jae-Sang,Kim, Dae-Young,Cho, Ju-Phil Korea Information Electronic Communication Technol 2018 한국정보전자통신기술학회논문지 Vol.11 No.4

최근 디지털 컨버전스는 현실세계를 기반으로 만들어진 미디어 콘텐츠에 가상 콘텐츠를 투영시켜 사용자에게 새로운 경험을 제공 할 수 있도록 발전하고 있다. 이에 본 논문에서는 HMD AR 기술을 이용한 Light ID 및 HMD-AR 기반 인터렉티브 전시를 제안하였다. 이 접근법은 현재 사용되고 있는 전시물에 추가적인 인프라를 설치할 필요 없이 기존 사용되고 있는 조명 또는 디스플레이를 사용 할 수 있다. 또한 Light ID는 웹 콘텐츠로의 접근을 위해서만 사용되는 QR 태그와 달리 위치 인식을 위한 식별자 및 통신 매체로도 사용될 수 있는데, 이는 카메라를 기반으로 한 광 무선 통신 (OWC)의 장점을 활용하여 스마트 장치에서 미디어 콘텐츠에 대한 ID를 수신하고 AR형태로 실감 3D 콘텐츠를 시각화하여 제공한다. 본 논문에서는 안드로이드 스마트폰을 사용하여 제안한 설계 기법에 대해 전주 한옥 마을을 타겟으로 Light ID 기반 광무선통신 기술을 활용한 실감 3D View 제공 기술을 구현하고 테스트를 수행하였으며, 실험 결과 제안한 기법을 통해 전시물에 관한 실시간 몰입형 3D 뷰를 제공 할 수 있음을 확인하였다. The digital convergence looking for new ways to engage visitors by superimposing virtual content on projection over the real world captured media contents. This paper propose the Light ID based interactive 3D immersive exhibition things view using HMD AR technology. This approach does not required to add any additional infrastructure to be built-in to enable service and uses the installed Lighting or displays devices in the exhibit area. In this approach, the Light ID can be used as a Location Identifier and communication medium to access the content unlike the QR Tag which supports provide the download information through web interface. This utilize the advantages of camera based optical wireless communication (OWC) to receive the media content on smart device to deliver immersive 3D content visualization using AR. The proposed exhibition method is emulated on GALAXY S8 smart phone and the visual performance is evaluated for Jeonju Hanok Village. The experimental results shows that the proposed method can give immersive 3D view for exhibit things in real-time.

A Study on IoT/LPWA-based Low Power Solar Panel Monitoring System for Smart City

판민쭝,비나야감 마리아판,차재상 한국ITS학회 2019 한국ITS학회논문지 Vol.18 No.1

The revolution of industry 4.0 is enabling us to build an intelligent connection society called smart cities. The use of renewable energy in particular solar energy is extremely important for modern society due to the growing power demand in smart cities, but its difficult to monitor and manage in each buildings since need to be deploy low energy sensors and information need to be transfer via wireless sensor network (WSN). The Internet of Things (IoT) / low-power wide-area (LPWA) is an emerging WSN technology, to collect and monitor data about environmental and physical electrical / electronics devices conditions in real time. However, providing power to IoT sensor end devices and other public electrical loads such as street lights, etc is an important challenging role because the sensor are usually battery powered and have a limited life time. In this paper, we proposes an efficient solar energy-based power management scheme for smart city based on IoT technology using LoRa wide-area network (LoRaWAN). This approach facilitates to maintain and prevent errors of solar panel based energy systems. The proposed solution maximizing output the power generated from solar panels system to distribute the power to the load and the grid. In this paper, we proved the efficiency of the proposed system with Simulink based system modeling and real-time emulation.

Design of Smart Device Assistive Emergency WayFinder Using Vision Based Emergency Exit Sign Detection

이민우,비나야감 마리아판,비투무키자 조셉,이정훈,조주필,차재상 사단법인 한국위성정보통신학회 2017 한국위성정보통신학회논문지 Vol.12 No.1

In this paper, we present Emergency exit signs are installed to provide escape routes or ways in buildings like shopping malls, hospitals, industry, and government complex, etc. and various other places for safety purpose to aid people to escape easily during emergency situations. In case of an emergency situation like smoke, fire, bad lightings and crowded stamped condition at emergency situations, it’s difficult for people to recognize the emergency exit signs and emergency doors to exit from the emergency building areas. This paper propose an automatic emergency exit sing recognition to find exit direction using a smart device. The proposed approach aims to develop an computer vision based smart phone application to detect emergency exit signs using the smart device camera and guide the direction to escape in the visible and audible output format. In this research, a CAMShift object tracking approach is used to detect the emergency exit sign and the direction information extracted using template matching method. The direction information of the exit sign is stored in a text format and then using text-to-speech the text synthesized to audible acoustic signal. The synthesized acoustic signal render on smart device speaker as an escape guide information to the user. This research result is analyzed and concluded from the views of visual elements selecting, EXIT appearance design and EXIT’s placement in the building, which is very valuable and can be commonly referred in wayfinder system.