http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
GPS 관측을 이용한 칠레지진(2010.2.27)에 의한 주변지역 변위발생분석
백정호,조정호,박필호 한국우주과학회 2010 한국우주과학회보 Vol.19 No.1
GPS 관측자료를 이용하여 최근 발생한 칠레지진에 의한 지각의 변위를 결정하고 결과를 분석하였다. 고정밀 측지용 이중주파수 GPS 수신기 및 안테나가 장착된 관측소의 자료를 처리하면 수 mm 정밀도로 관측소의 위치를 결정할 수 있으며, 수년간의 관측자료가 누적되면 연간 mm급의 움직임도 관측할 수 있어 판운동이나 지진, 단층연구 등에 널리 활용되고 있다. 이번 2010년 2월 27일 칠레 중서부에서 발생한 지진은 인근 지역을 30 cm 이상 움직였을 것으로 예상되며 8.8의 대형 지진규모와 많은 인명 및 재산피해를 유발시켜 학계뿐만 아니라 일반 언론에도 많은 주목을 받고 있다. 이 연구에서는 지진이 발생한 지역 부근에 위치한 국제 GPS 기준망의 GPS 관측자료를 처리하여 지진 발생 전후의 변위를 산출하고 분석하였다. 자료처리를 위해 Bernese GPS S/W 5.0을 사용하였고 24시간단위 자료에 대해 이중차분방법과 단독정밀측위방법을 사용하였다. 또한 지진이 발생 도중의 변위를 관찰하기 위해 이동측위방법을 사용하여 30초마다의 움직임을 계산하였다.
확장칼만필터와 UNSCENTED 칼만필터를 이용한 우주발사체의 실시간 궤적추정
백정호,박상영,박은서,최규홍,임형철,박종욱,Baek, Jeong-Ho,Park, Sang-Young,Park, Eun-Seo,Choi, Kyu-Hong,Lim, Hyung-Chul,Park, Jong-Uk 한국우주과학회 2005 Journal of Astronomy and Space Sciences Vol.22 No.4
본 논문에서는 우주개발 중장기계획에 따라 개발 중인 KSLV-I 우주발사체가 나로 우주센터에서 발사될 경우를 가정하여 확장칼만필터와 Unscented 칼만필터를 통한 실시간 궤적추정 결과를 비교 분석하였다. 이를 위해 가상의 KSLV-I과 관측 레이더 3기를 바탕으로 실제 궤적을 생성하였으며, 관측자료는 실제 궤적에 관측오차를 고려하여 생성하였다. 이에 대해 초기 추정오차가 작은 경우와 큰 경우로 구분하고, 관측주기가 20Hz와 10Hz인 경우로 나누어 각각 두 필터를 적용해서 성능을 비교하였다. Unscented 칼만필터는 확장칼만필터보다 큰 초기 추정오차에 대해 수렴이 빠르고 정확도가 높으며, 느린 관측주기에도 우수한 성능을 보이는 것을 확인하였다. This research supposed when a fictitious KSIV-I space launch vehicle launches from NARO space center. This compared and analyzed the results from real-time trajectory estimation using the Extended Kalman Filter and the Unscented Kalman Filter. A virtual trajectory and observation data are generated for the fictitious KSLV-I and three measurement radars. The performances of both Otters are compared for several simulations with small initial errors, large initial errors, 20Hz and 10Hz data rate. The results show that the Unscented Kalman Filter yields faster convergence and more accurate than the Extended Kalman Filter for the cases with larger initial error and slower data rate conditions.
유전체 서열 재사용을 이용한 Genotyping By Sequencing 기술의 단일 염기 다형성 탐지 효율 개선
백정호,김도완,김준아,이태호,Baek, Jeong-Ho,Kim, Do-Wan,Kim, Junah,Lee, Tae-Ho 한국정보통신학회 2015 한국정보통신학회논문지 Vol.19 No.10
개별 생물의 유전적 특성인 유전형 정보를 얻기 위한 개발된 기법들 중 현재 가장 많이 사용되고 있는 것은 차세대 염기서열결정을 통해 얻어진 서열을 분석하여 단일핵산염기다형현상 기반의 유전형 정보를 얻어내는GBS 방법이다. 현재 TASSEL은 GBS방법을 통해 얻어진 서열을 분석하여 시료의 유전형을 측정하기 위해 가장 많이 사용되고 있는 프로그램 중 하나이다. 그러나 TASSEL은 염기서열결정을 통해 얻어진 서열 중 일부만을 사용하는 한계가 존재한다. 우리는 이러한 한계를 극복하기 위한 효율성 개선에 대한 연구를 시작하였다. 효율성 개선을 위해 TASSEL에서 사용후 버려지는 서열의 퀄리티를 체크하여 에러율 0.1% 이하인 데이터를 확인 한 후 퀄리티가 에러율을 충족하는 부분의 서열들을 필터링 한다. 그리고 마지막으로 바코드와 제한 효소의 부분을 확인하여 길이에 따라 서열을 잘라내어 새로운 데이터 셋으로 생성하는 구조를 반복하는 알고리즘으로 구현 하였으며, 약 17% 이상의 SNP 탐지효율성 증가함을 확인 하였다. 본 논문에서는 이와 같이 유전형 연구에서 사용되지 않는 유전체 염기서열들을 사용하여 더 많은 숫자의 단일 염기 다형성을 탐지하는 방법과 구현된 프로그램을 제시한다. Recently, the most popular technique to determine the Genotype, genetic features of individual organisms, is the GBS based on SNP from sequences determined by NGS. As analyzing the sequences by the GBS, TASSEL is the most used program to identify the genotypes. But, TASSEL has limitation that it uses only the partial sequences that is obtained by NGS. We tried to improve the efficiency in use of the sequences in order to solve the limitation. So, we constructed new data sets by quality checking, filtering the unused sequences with error rate below 0.1% and clipping the sequences considering the location of barcode and enzyme. As a result, approximately over 17% of the SNP detection efficiency was increased. In this paper, we suggest the method and the applied programs in order to detect more SNPs by using the disused sequences.
CrN 코팅구조에 따른 Polymer Electrode Membrane Fuel Cell 금속분리판의 부식특성 비교
백정호,한원규,강성군,Paik, Jung-Ho,Han, Won-Kyu,Kang, Sung-Goon 한국재료학회 2010 한국재료학회지 Vol.20 No.4
Chromium nitride (CrN) samples with two different layer structures (multilayer and single layer) were coated on bipolar plates of polymer electrolyte membrane fuel cells (PEMFC) using the reactive sputtering method. The effects with respect to layer structure on corrosion resistance and overall cell performance were investigated. A continuous and thin chromium nitride layer ($Cr_{0.48}\;N_{0.52}$) was formed on the surface of the SUS 316L when the nitrogen flow rate was 10 sccm. The electrochemical stability of the coated layers was examined using the potentiodynamic and potentiostatic methods in the simulated corrosive circumstances of the PEMFC under $80^{\circ}C$. Interfacial contact resistance (ICR) between the CrN coated sample and the gas diffusion layer was measured by using Wang's method. A single cell performance test was also conducted. The test results showed that CrN coated SUS316L with multilayer structure had excellent corrosion resistance compared to single layer structures and single cell performance results with $25\;cm^2$ in effective area also showed the same tendency. The difference of the electrochemical properties between the single and multilayer samples was attributed to the Cr interlayer layer, which improved the corrosion resistance. Because the coating layer was damaged by pinholes, the Cr layer prevented the penetration of corrosive media into the substrate. Therefore, the CrN with a multilayer structure is an effective coating method to increase the corrosion resistance and to decrease the ICR for metallic bipolar plates in PEMFC.
유가충격이 무역수지에 미치는 영향에 관한 연구: 한중 무역에서의 새로운 증거
백정호,김홍률 한국무역연구원 2022 무역연구 Vol.18 No.4
Purpose The primary contribution of this paper is to investigate the impacts of oil supply shocks, aggregate demand shocks, and oil-specific demand shocks on three measures of South Korea’s trade balance oil, non-oil, and total trade balance with its top trading partner China. Design/Methodology/Approach In order to investigate how trade balance is influenced by three types of oil price shocks, we used a Structural Vector Autoregressive (SVAR). Also, Impulse Response Function (IRF) was used to calculate degree of the trade balance response to the oil price shock. Findings We discover that aggregate demand shocks have the greatest impact on Korea’s trade balances, while oil supply shocks have negligible impacts. Additionally, the overall impact of the three oil shocks on Korea’s trade balances with China appears to rely on the response of the non-oil trade balance. Research Implications This outcome explains why the roles of the different shock components of crude oil prices should be accounted for when modeling the nexus between oil price shocks and Korea’s balance of trade