http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
백승원,문현영,김상수,김선홍,전영준,김종환 한국국방경영분석학회 2023 한국국방경영분석학회지 Vol.49 No.3
In the evolving landscape of warfare, both conventional and advanced threats necessitate the development of versatile weapon systems. As the Korean military readies for such challenges, guided by Defense Innovation 4.0 and Army Vision 2050, there is a need to innovate tactical vehicles for diverse mission requirements. Drawing lessons from the U.S. military's operational experiences with humvees in Iraq and Afghanistan, there is a noticeable shift towards the versatile use of tactical vehicles. Key military powers are now advancing towards the serialization and modularization of these vehicles for multi-mission adaptability. Inspired by the U.S. military's Modular Open Systems Approach (MOSA), this paper delves into the development of functional and institutional strategies for the next-generation of tactical vehicles. Through an analysis of current tactical vehicles domestically and internationally, the study critiques the limitations of domestic serialization and advocates for the benefits of an open architecture-based approach, suggesting key functional and institutional refinements in the acquisition process.
몬테칼로 시뮬레이션 기반의 CSRP 품목 불량률 추정 방법론에 관한 연구
백승원,김욱기,이남례,이해연,정용준,안남수 광운대학교 방위사업연구소 2023 선진국방연구 Vol.6 No.1
군은 저장 중인 화생방 장비·물자에 대한 사용가능성, 안전성, 신뢰성, 성능 등을 평가하여 해당 장비·물자의 저장 및 폐기 등을 결정하는 신뢰성평가업무(Chemical Material Stockpile Reliability Program)를 진행하고 있다(저장 화생방장비·물자 신뢰성평가 훈령, 2019). 현행 모든 CSRP 품목은 시험항목별 중요도에 따라 검사수준을 결정되고, 로트크기를 고려하여 샘플 수와 합격품질한계(Acceptance Quality Limit, AQL)가 제시된다. 이 모든 과정은 KS Q ISO 2859-1(계수형 샘플링 검사절차)에 준하여 적용 중이며, 일반적으로 CSRP 품목의 로트 전체(모집단)의 불량률은 이항 분포와 같은 단일분포로 가정하고 있다. 하지만, CSRP 품목의 합/불은 단일 항목이 아닌 통상 10개 내외 시험항목의 결과로 최종 판정되며, 항목의 불량 발생요인도 상이하다. 본 연구는 몬테칼로 시뮬레이션 기반의 CSRP 품목 불량률 추정 방법론을 토대로 K1 방독면의 기술검사 항목에 적용하여 불량률을 추정한다. 본 연구의 결과는 불량률 추정 관련 연구를 확장하였으며, CSRP 품목의 표준시료의 필요성을 제기하는 향후 연구방향을 제시하였다는 점에서 연구의 의의가 있다.
무게감량법과 전기화학적 기법을 이용한 염화물 수용액에서 구리시편의 내식성 연구
백승원,이종권 순천향대학교 부설 산업기술연구소 2013 순천향 산업기술연구소논문집 Vol.19 No.1
Corrosion resistance of Cu alloy in chloride solution such as FeCl3 and CuCl2 were measured. The linear polarization, impedance spectroscopy and weight loss technique were employed to measure the corrosion rate. In weight loss method, a initial corrosion rate were 189mmpy in FeCl3 solution, whereas 25mmpy in CuCl2 solution. The corrosiveness and metal corrodibility were discussed using planned-interval test. The measured corrosion rate from impedance spectroscopy and linear polarization techniques were compared with weight loss methods. Comparing to the corrosion rate of weight loss methods in FeCl3 solution, those of linear polarization technique and impedance spectroscopy were 60% and 170%, respectively.
Pitting Failure of Copper Pipings for Emergency Fire Sprinkler in Ground Water
백승원,이종권,김종집,김경자 대한금속·재료학회 2015 METALS AND MATERIALS International Vol.21 No.3
The possibility of microbiologically influenced corrosion was investigated in the early pitted copper pipes. The pipes were installed for less than 6 months as an immergency fire sprinkler. The bacteria were cultured by sampling of corrosion by-product near pits on failed copper pipes for the aerobic as well as anaerobic bacteria. However, only aerobic bacteria was found, which were Micrococcus Luteus and Bacillus sp.. The corrosion rate of copper pipes were studied by weight loss in the groundwater and polarization method. In immersion test as well as the electrochemical polarization test in ground water, only Micrococcus Luteus could activate corrosion of copper by 20% and 15%, respectively. On the other hand, Bacillus sp. showed little effect on corrosion in the above two tests. The shape and characteristics of failed copper pipes as well as simulated copper were investigated using stereoscope, optical microscopy, scanning electron microscope and EDS. The cause of pits were discussed, related with the dissolved copper concentrations, pH, and optical density. It could be concluded that the early failure of copper pipings could be ascribed to the acceration of copper in the presence of bacteria, i.e., Micrococcus Luteus.
Evolution Equation for the Shape Function in the Parton model Approach to Inclusive B Decays
백승원,이강원 한국물리학회 2005 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.47 No.1
We derive an evolution equation for the shape function of the b quark in an analogous way tothe Altarelli-Parisi equation by incorporating the perturbative QCD correction to the inclusivesemileptonic decays of the B meson. Since the parton picture works well for inclusive B decays dueto the heavy mass of the b quark, the scaling feature manifests and the decay rate may be expressedby a single structure function describing the light-cone distribution of the b quark apart from thekinematic factor. The evolution equation introduces a q2 dependence of the shape function andviolates the scaling properties. We solve the evolution equation and discuss the phenomenologicalimplication.
몬테칼로 시뮬레이션을 활용한 CSRP 품목 불량률 추정 모델
백승원,김욱기,정자훈,류준열,안남수 한국품질경영학회 2022 한국품질경영학회 학술대회 Vol.2022 No.2
군은 저장 중인 화생방 장비·물자에 대한 사용가능성(Serviceability), 안전성(Safety), 신뢰성(Reliability) 및 성능(Performance) 등을 평가하여, 획득·저장 및 시험·폐기 등의 결정을 위한 자료를 제공하고 저장 화생방 장비·물자의 신뢰성평가업무(Chemical Materiel Stockpile Reliability Program, 이하 CSRP)를 수행하고 있다(저장 화생방장비·물자 신뢰성평가 훈령, 2019). 현행 모든 CSRP 품목들은 KS Q ISO 2859-1(계수형 샘플링 검사절차)에 준하여, 로트크기와 합격품질한계(Acceptance Quality Limit, AQL)에 따라 0/1(Ac/Re) 합격판정을 하고 있으며, 일반적으로 관심 품목 로트 전체(모집단)의 불량률을 이항분포와 같은 단일분포로 가정한다. 하지만, 저장품목의 합/불판정은 단일 시험항목이 아닌 통상 10개 내외의 시험항목의 결과로 결정되며, 이 항목들의 불량 발생요인 및 특성 또한 상이하다. 본 논문에서는 시험항목의 불량 발생요인 및 특징을 분석하여, 시험항목별 불량률 분포를 합리적으로 가정한다. 이를 바탕으로, 단일 품목의 불량률을 유추할 수 있는 모형을 몬테칼로 시뮬레이션을 활용하여 제시하고자 한다. 추가적으로, 새롭게 도출된 모형의 결과물을 통해, CSRP 품목의 효과적인 저장 및 평가에 활용할 수 있는 유의미한 결과들을 도출하고자 한다.