http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
간접가온 건조방식의 건조시설을 이용한 하수슬러지 퇴비화에 관한 연구
백선재,한인섭,최익훈,강성효,홍성민 대한상하수도학회 2014 상하수도학회지 Vol.28 No.3
The need of reusing sewage sludge is highly increasing as the amount of domestic sewage sludge is growing and sewage management strategies were reinforced. Accordingly, in this research, we studied the composting possibility of sludge in sewage treatment plant J, using dryer facility with indirect system by conducting component analysis of dried sludge and experiment on cultivating crops. It was observed from the component analysis, that the dried sludge is appropriate for both decomposed manure standard of Ministry of Environment and fertilizer standard of Rural Development Administration. Besides, in the experiment on cultivating lettuce, the experimental group(soil + dried sludge) was superior to the control group(soil + bed soil) in apparent condition of leaves tensity and damage by disease and pest. In case of cultivating tomato, the experimental group showed stronger durability of fruits dangling on stems compared to the control group after 9 weeks. Consequently, the excess sludge dried by indirect heating system in the sewage treatment plant J is appropriate for the standard of both Ministry of Environment and Rural Development Administration and show good result in experiment on cultivating crops therefore it can be reused for composting.
RFID 리더 투명성 지원을 위한 리더 프레임워크 개발
백선재,문미경,Baek, Sun-Jae,Moon, Mi-Kyeong 한국정보통신학회 2011 한국정보통신학회논문지 Vol.15 No.2
최근 RFID (Radio Frequency Identification) 기술이 다양한 분야에서 관심을 받고 사용됨으로써 RFID 리더 제조회사들은 다양한 종류의 리더를 생산하고 있다. 현재 RFID 기술에서 RFID 태그 데이터 전송 형태는 EPCglobal에서 제공하는 표준 규약을 따르고 있지만 각 리더 별 리더 연결 및 통신 방법은 회사별로 다른 실정이다. RFID 리더를 사용하던 중 타 회사나 리더 인터페이스가 다른 RFID 리더로 변경하거나 새롭게 추가해야 하는 경우에는 사용자가 직접 RFID 미들웨어 개발단계로 돌아가 미들웨어의 내부 요소를 변경해야 하는 상황이 발생한다. 본 논문에서는 RFID 기술을 사용 시, 특히 여러 회사 또는 표준화되지 않은 인터페이스를 제공하는 RFID 리더를 사용하는 경우에 RFID 애플리케이션과 독립적으로 리더를 관리할 수 있는 리더 프레임워크를 개발하고자 한다. 본 리더 프레임워크는 RFID 애플리케이션과 RFID 리더 사이에 존재하여 RFID 리더 투명성을 제공한다. 본 리더 프레임워크는 현재 작동되고 있는 리더를 모니터링 할 수 있고, 리더의 속성을 확인할 수 있으며 RFID 태그 이벤트 정보, 시스템 로그 정보를 확인할 수 있다. 본 리더 프레임워크를 통해 수십 대의 이기종의 RFID 리더 상태를 용이하게 관리할 수 있게되며 애플리케이션 상의 코드 수정 없이 리더의 추가, 삭제가 가능하게 된다. More recently, variety RFID (Radio Frequency Identification) readers are produced by RFID equipment manufactures. Although a transmission standard instituted by EPCglobal is proposed for data transmission between the RFID readers and tags, other RFID reader protocols and the communication connection methods are be in use in other RFID companies. To replace or add the RFID readers of an RFID system, the developers should make changes to the core of the application and/or middleware. In this paper, we propose an RFID reader framework which can manage RFID readers without having to make changes the code of the application in environment with the growing number of heterogeneous RFID readers.This framework that sits on the layer between the RFID readers and the applications provides transparency to the RFID readers. Additionally, it can be used for monitoring the state and the property of all connected RFID, and for recording the RFID tag event logs and system logs. By using this framework, heterogeneous readers can be replaced and added without writing additional code in the applications. Consequently the readers can be easily managed and controlled by the RFID system administrator.
열매체유를 이용한 간접가온에 의한 하수슬러지 건조특성에 관한 연구
백선재,한인섭,홍성민,강성효 한국폐기물자원순환학회 2014 한국폐기물자원순환학회지 Vol.31 No.5
The amount of sewage treatment has been increasing year by year as the small and medium sized cities grow in Korea. Besides, the treatment of sludge has been more significant owing to the total ban on disposal of organic sludge in a landfill since April 2004 and ocean dumping of organic waste since December 2013. In this research, we studied the drying characteristics of sewage sludge by indirect heating device using thermal oil. The indirect heating device operated in a batch for 16 hours according to the variation of drying temperature between 100 and 200oC and the initial input weight of each type of sewage sludge was equally 60 kg. As a result, the moisture content in raw, excess and mixed sludge became lower than 10% under 14 hours at 160oC. The average water loss rate of raw, excess and mixed sludge is 0.436 g-wet/ min, 0.362 g-wet/min and 0.367 g-wet/min respectively at this stage. Therefore, the raw sludge can be dried well, using indirect heating device in sewage treatment plant. Also, it is better to dry raw sludge or excess sludge alone than mixed sludge because each type of sludge does not make synergistic effect but counter effect when they are together.