http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
배재흠,황인국 수원대학교 산업기술연구소 2000 산업기술연구소논문집 Vol.15 No.-
Red mud is generated as a by-product during the production of aluminum hydroxide from bauxite ore. In this study, inorganic coagulants were manufactured by reacting 5 M H2SO4 solution or 9MHCL solution with red mud. Removal experiments of phosphate phosphorus(PO43--P), turbidity and COD in wastewater by the developed inorganic coagulants were studied in the various experimental conditions. As a result, the developed coagulants were found to have good removal performance of phosphorus and turbidity in wastewater. And the COD removal efficiency by the developed coagulants was compared with that by commercial coagulant.
배재흠,이준식,이한수,정흥석,김광락,송명재,손순환 한국원자력학회 1995 Nuclear Engineering and Technology Vol.27 No.1
중수로형 원자력 발전소에서는 가동년수가 증가함에 따라 중수는 삼중수소로 오염된다. 오염된 중수의 정화에 적합한 공정으로 평가되는 기액촉매교환-화학평형 -증류공정으로 이루어진 촉매복합공정의 주요 설계변수를 설정하여, 이 변수들이 촉매탑 및 증류탑의 용적과 초저온 냉동부하에 미치는 영향을 분석하였다. 촉매탑은 조작선 기울기가 약 0.634, 그리고 제 1, 제 2 증류탑의 농축율 및 삼중수소 제거율을 변화시킬 때 최적 환류비 값이 각각 약 7과 4.7일 때 최적조건임을 밝혔다. 그리고 저온증류공정해석을 위하여 Fenske, Underwood, and Gilliland Equation과 Smoker Equation을 사용하여 이 두모델식의 계산값을 비교 검토한 결과 거의 유사한 설계값을 얻을 수 있음을 확인하였다.
배재흠,민병훈,김수만,최종현,조병렬,김태준,황성태 한국원자력학회 1996 Nuclear Engineering and Technology Vol.28 No.2
액체금속로의 안전설계 및 안전해석에 있어서 고려되어야하는 용융나트륨과 콘크리트 반응의 특성, 그리고 이들 반응의 모델을 조사 분석하였고 액체금속로 개발 선진국들의 나트륨-콘크리트 반응연구 현황을 검토 분석하였다. 그리고 나트륨-콘크리트 반응은 매우 복잡하여 액체금속로 개발 선진국에서 이의 반응 연구를 꾸준히 진행시키고 있고 액체금속로의 안전설계 및 안전운전을 위하여 보다 완벽한 반응모델을 개발하고자 노력하고 있어 우리나라에서 액체금속로 개발을 추진하기 위한 앞으로의 나트륨콘크리트 연구방향을 제시하였다.
배재흠 수원대학교 산업기술연구소 2001 산업기술연구소논문집 Vol.16 No.-
폐윤활유를 연료유로 재활용하는 공정에는 여러 가지가 있으나 이를 열분해하여 경유 대체 연료로 사용하는 공정이 유망한 공정으로 평가된다. 그러나 이렇게 생산된 열분해유는 사용중에 악취가 나며 타르가 발생하는 단점이 있다. 본 연구에서는 열분해유 중의 악취와 타르를 제거하는 여러 방법을 시도한 결과 NaOH용액으로 악취를, H2SO4용액으로 타르를, 그리고 색도 향상을 적니를 처리하는 하이브리드 공정이 가장 경제적이고 효율적임을 확인하였다. There are many processes available for recycling waste lubricating oils as fuel oil. Among these processes, the thermal cracking process which can produce alternative diesel fuel oil has been considered to be the most promising one. However, the process has some disadvantages which may generates malordor and tar. In this work, various treatment methods were tested for reduction of malordor and tar from the thermal cracking oil. As a result, it was found that the most efficient and economical process for quality improvement of thermal cracking oil is a hybrid one of NaOH solution treatment for malordor reduction and H₂O₄solution treatment for ordor removal, and red mud absorption treatment for color improvement.