http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Ni 치환에 따른 TiV-based 합금의 수소저장 특성
최원경,조태환,배장순 단국대학교 신소재기술연구소 2001 신소재 Vol.10 No.-
체심입방구조를 갖는 TiV_1.4합금의 V성분을 Ni금속으로 부분치환하여 얻은 TiV_0.9Ni_0.5 삼원계합금의 미세 구조와 조성변화를 조사하여 얻어진 branch 합금들의 수소저장 특성에 대하여 검토하였다. TiV_0.9Ni_0.5 합금은 BCC결정구조의 TiV_2.1Ni_0.3 고용체와 (FCC+BCC) 혼합결정구조를 갖는 TiV_0.2Ni_0.8의 금속간화합물로 구성된 multi phase합금이고 수소저장량은 H/M=1.69(P_Eq=0.5 Mpa)로 나타났다. TiV_0.9Ni_0.5 합금을 구성하는 주상조성으로 제조한 TiV_2.1Ni_0.3 고용체의 수소저장량은 H/M=1.99(P_Eq=0.5 MPa)로 상당히 많은 양의 수소를 저장하는 것이 확인되었으며, 고용체합금을 포함하지 않는 금속간화합물 TiV_0.2Ni_0.8의 수소저장량은 고용체나 고용체를 포함하는 합금보다 적은 것이 확인되었다. Hydrogen storage properties of branched alloy determined analysis of microstructure and composition variation for TiV_0.9Ni_0.5 alloy with BCC crystal structure obtained partial Ni substituted V of TiV_1.4 alloy was investigated. Multi phase TiV_0.9Ni_0.5 alloy was consisted TiV_2.1Ni_0.3 solid solution with BCC crystal structure and TiV_0.2Ni_0.8 intermetallics with complex (FCC+BCC) crystal structure and stored hydrogen concentration was H/M=1.69(E_Eq=0.5 MPa). Higher hydrogen storage capacity(H/M=1.99) for TiV_2.1Ni_0.3 solid solution prepared main phase composition of TiV_0.9Ni_0.5 alloy was identified and lower hydrogen storage capacity was observed for TiV_0.2Ni_0.8 intermetallics than solid solution or alloy with solid solution phase.
Phosphonium 및 ammonium염을 포함하는 가교화된 전해질 고분자를 이용한 습도센서
공명선,이칠원,박승현,배장순 단국대학교 신소재기술연구소 2002 신소재 Vol.11 No.-
Phosphonium과 ammonium염을 포함하는 고분자 습도센서의 감습재료로 vinylbenzyl tributyl phosphonium chloride(VTPC), 2-ethylhexyl acrylate(2-EHA), [2-(methacryloyoxy)ethyl]trimethyl ammonium chloride(METAC), 4-vinyl pyridine(4-VP)의 VTPC/2-EHA/METAC/4-VP=2/3/2/3 조성의 4원 공중합체를 합성하였다. 합성한 공중합체는 1,4-dichlorobutane과 가교반응을 진행하여 최종 감습액을 제조하였다. 감습막의 전극과의 접착성 향상을 위하여 3-[(2-aminoethyl(aminopropyl)] trimethoxysilane로 표면처리된 금/알루미나 전극에 침적법으로 도포한 후, 열가교 반응을 통하여 고분자막 저항형 습도센서를 제작하였다. 실험결과 습도센서는 30%RH, 60%RH 그리고 90%RH에서 평균 저항값이 각각 971 ㏀ 132㏀ 그리고 12.6㏀로 나타났다. 또한 히스테리시스는 ±2%RH 안에서 나타났으며, 응답속도는 30%RH에서 90%RH로 변화시 75초이며 수중에 2시간 침적 후 저항변화는 ±0.5%RH 이내에서 존재하였다. The four-component copolymers of vinylbenzyl tributyl phosphonium chloride (VTPC), 2-ethylhexyl acrylate (2-EHA), [2-(methacryloyoxy)ethyl]trimethyl ammonium chloride (METAC) and 40vinyl pyridine (4-VP) was synthesized as a humidity sensitive material. The humidity-sensitive membrane was composed of copolymer VTPC/2-EHA/METAC/4-VP=2/3/2/3. The electrode and substrate were treated with 3-(2-aminothyl(aminopropyl(trimethoxysilance for improving the adherence to the alumina substrate. The final humidity membrane was formed using crosslinking reaction with 1,4-dichlorobutane after dip-coating on the electrode. The average resistance at 30%RH, 60%RH and 90%RH are 971 ㏀, 132 ㏀ and 12.6 ㏀, respectively. The hysteresis exist within ±2%RH and the response time between 30 and 90%RH. The water resistance falls within ±0.5%RH after immersing in water for 2 hr.