http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고속 광통신용 GaInAs/InP PIN 수광소자 모듈 제작
박찬용,박경현,이창원,이용탁,Park, Chan-Yong,Park, Kyung-Hyun,Lee, Chang-Won,Lee, Yong-Tak 한국전자통신연구원 1991 전자통신 Vol.13 No.4
We fabricated very high. speed PIN Photodiode module for the application of high speed optical receiver. OMVPE was used for the growth of InP layer on InGaAs absorption layer. The structure was the combination of mesa and planartype. Fabrication procedure was more complicated than simple mesa or simple planar type structure because we used semiinsulating InP substrate in order to reduce stray capacitance. The results at-5V were as follows : dark current was less than 1nA, capacitance was 0.55pF, and cutoff frequency was above 3GHz, and rise and fall time was about 100ps.
都市林의 屋外레크레이션 機能과 價値의 計量的 評價에 關한 硏究 -都市林의 利用滿足度를 中心으로-
박찬용,Park, Chan-Yong 한국조경학회 1990 韓國造景學會誌 Vol.18 No.3
This study aims at identifying factors and variables which have significant effects on users satisfaction with recreational activities and facilities in Apsan city natural park and therby establishing indicies of planning and / or development of urban forest. To test the causal models of this research, The data were gathered by self-administered questionnaires from 1,147 households in Taegu city which were selected by the multi-stage probabiling sampling method. The analysis of the data primarily consist of two phases : The first analysis dealt with exploratory factor analysis which identified major factors involved in satisfaction with recreational activities and facilities in Apasn city natural park and the second analysis tested the fit of causal models of this research to the data using LISREL methodology. The factor analysis identified that three significant factors are involved in satisfaction with recreational activities and five significant factors are inherent in satisfaction with recreational facilities. The second phase analysis tested the fit of the causal models for satisfaction with recreational activities and facilities to the data and identified statistically significant causal linkage among overall satisfaction with the park, other indogenous factors and exogenous variables. These significant relationships represent important factors and variables that should be considered in planning and/of development of the city natural park. On the basis of there significant causal relationships implications for planning and/or development of the city natural park were suggested.
권진욱 ( Jin Wook Kwon ),박찬용 ( Chan Yong Park ) 한국농촌계획학회 2013 농촌계획 Vol.19 No.3
This study aimed to plan a distinctive apple theme park, thereby specializing the nationwide brand of Cheongsong apple. Detailed objectives included: to establish the best possible environments in Korea to taste and appreciate apple and enjoy the Cheongsong Apple Festival; to identify and foster natural, cultural and social resources in the clean environment of Cheongsong; to clusterize research and production infrastructures for strengthening local competitiveness; and to develop a hub for the vitalization of the region where visitors and locals can mutually prosper. The study was multi-phased. The first stage included basic surveys such as local status and environment analysis and similar case studies, and the second stage was to review the appropriateness of theme selection, develop basic principles and strategies for development goals and review and incorporate project details. And the third stage aimed to develop a comprehensive plan from spatial plans and program plans and suggest plans to vitalize the operation of the park. The dimension of the subject site was 180,150㎡, which was divided into four areas, in consideration of the land use and the environmental characteristics of the resources, for developing a land use scheme. The four areas were named: the apple-theme cultual area; the agricultural culture experience area; the plaza for exchange and harmony; and the plaza for natural observation. This study has significance in that it can serve as a case to develop farm theme parks, and as a case of appropriate development of programs to identify amenity resources with a focus on the existing resources and in consideration of local characteristics.
권진욱 ( Jin Wook Kwon ),박찬용 ( Chan Yong Park ) 한국농촌계획학회 2014 농촌계획 Vol.20 No.3
The Saemaeul Movement, which is the representative national campaign of Korea aimed at the development of local communities, has drawn a great deal of attention from home and abroad and formed an element of Korea``s national brand since 2000. Accordingly, this research was conducted for the purpose of constructing a memorial park in Shindo Village, Cheongdo County, North Kyoungsang Province, which is a home to the Saemaeul Movement. As the Saemaeul Movement is benchmarked by many countries around the world today, this research aims to communicate the spirit and social value of the movement and disseminate its effects of local community development in rural areas through the construction of a memorial park. In this study, the design motive of the memorial park was conceived through the historical review and case studies of the Saemaeul Movement. In parallel, theoretical study was also conducted on design techniques as the basis of this research. In consideration of the characteristics of a technical article, this research was conducted in several phases. In the first phase, the conditions of the site where the park construction was planned were analyzed and the direction of its development was set. In the second phase, the main theme and the basic principles of planning were established, and the contents of the park construction project were devised in detail. In the last phase, a comprehensive plan was established, including a space layout to accommodate activities, facilities and programs to be introduced to the park. The park construction site (106,000㎡) was divided into four zones (memorial zone, historical theme park, education zone and experience zone) based on circulation planning aimed at creating memorial space, and was linked to eco-friendly ecological space in consideration of environmental features. At a time when the Saemaeul Movement is being propagated across the world, the result of this study will help create a place for its memorial and play a pivotal role to boost international movements aimed at promoting co-prosperity across the global village. It will also bear significance as an example of theme-based park construction in a rural area and the invigoration of a local community.
권진욱 ( Jin Wook Kwon ),박찬용 ( Chan Yong Park ) 한국농촌계획학회 2014 농촌계획 Vol.20 No.1
This study aims to draw up a basic plan to construct an agricultural theme park in a farming city as a way of establishing its regional identity represented by “Three Whites.” Sangju, Kyongsangbuk-do which is the subject area of the study has been well-known for "Three Whites (rice, silkworm cocoon and dried persimmon)." The purpose of the study is to take a closer look at the folk life and culture of Sangju and develop tourism resources to promote regional development and competitiveness of the city. This study was conducted in several phases in consideration of the characteristics of plan and design, on the basis of the theoretical review of agricultural tourism. In the first phase, planning conditions were analyzed as per development objectives. In the second phase, strategies and concepts were established for the theme park, based on which development methods were decided by phase and facility. Then, a preliminary review was conducted on functions and facilities to introduce to the theme park. In the third phase, a comprehensive plan was drawn up, which includes basic plans for respective parts. In consideration of the characteristics of the study, construction was not looked at in detail. The total size of land subject to the study is approx. 97,960㎡, which was divided into four separate zones-Sambaek Cultural Experience Zone, Natural Observation & Experience Zone, Agricultural Life Experience Zone and other facilities zone--in order to connect facilities, functions and experience with the physical characteristics of the city, and separate space planning was conducted for each zone. The outcome of the study carries significance as an example of alternative tourism which considers regional characteristics, develops local resources and makes use of obsolete rural facilities, in what is called the eco-friendly development where nature and eco-system, landscape and culture, and recreation and leisure come together as one.
박찬용,전영찬,정창모,윤미정,Park, Chan-Yong,Jeon, Young-Chan,Jeong, Chang-Mo,Yun, Mi-Jung 대한치과보철학회 2009 대한치과보철학회지 Vol.47 No.1
연구목적: 2종의 열가압 도재 (e.max Press, Empress Esthetic)와 법랑질 간의 마모양상을 알아보기 위하여 장석계 도재 및 제 3형 금합금과 비교, 관찰하였다. 연구 재료 및 방법: 열가압 도재 e.max Press, Empress Esthetic 및 금속도재관 제작용 장석계 도재 Cermaco 3, 제 3형 금합금으로 원반형 시편을 제작하고, 상대 마모재로는 발거된 건전한 소구치의 교두를 이용하여 Pin-on-disk tribometer 상에서 마모시험 하였다. 법랑질의 마모량은 마모 전후 치아 시편의 무게 변화를 측정하여 부피로 환산하였고, 도재 및 금합금 시편의 평균 표면 조도와 마모트랙 깊이를 표면조도기로, 마모트랙 폭을 주사전자현미경으로 측정하여 마모 양상을 비교하였다. 결과: 1. 법랑질의 마모량은 Ceramco 3군에서 가장 크고 Empress Esthetic군, e.max Press군, 금합금군 순으로 작았으며, Ceramco 3군과 Empress Esthetic군 사이와, Empress Esthetic군, e.max Press군 및 금합금군 사이에는 유의한 차이가 없었다 (P>.05). 2. 마모시험 후 도재 시편의 평균 표면 조도는 Ceramco 3군, Empress Esthetic군, e.max Press군 순으로 작았으며, Empress Esthetic군과 Ceramco 3군 사이에는 유의한 차이가 없었다 (P>.05). 3. 마모트랙의 깊이는 모든 군 사이에 유의한 차이는 없었고 (P>.05), 마모트랙의 폭은 법랑질 마모량 순서와 동일하게 Ceramco 3군, Empress Esthetic군, e.max Press군, 금합금군 순으로 작았으며, e.max Press군과 Empress Esthetic군 사이 및 Empress Esthetic군과 Ceramco 3군 사이에 유의한 차이는 없었다 (P>.05). 결론: 열가압 도재는 장석계 도재보다 법랑질을 더 마모시키지는 않았다. Purpose: The purpose of this study was to compare the wear characteristics of human enamel opposing 2 heat-pressed ceramics (e.max Press and Empress Esthetic), conventional feldspathic porcelain (Ceramco 3) and type III gold alloy. Material and methods: Intact cusps of extracted premolars were used for enamel specimens. Five disk samples were made for each of two heat-pressed ceramics groups, conventional feldspathic porcelain group and type III gold alloy group. Wear tests were conducted in distilled water using a pin-on-disk tribometer. The amount of enamel wear was determined by weighing the enamel specimens before and after wear tests, and the weight was converted to volumes by average density. The wear tracks were analyzed by scanning electron microscopy and surface profilometer to elucidate the wear characteristics. Results: 1. Ceramco 3 led to the greatest amount of enamel wear followed by Empress Esthetic, e.max Press and type III gold alloy. However, there was no significant difference between Ceramco 3 and Empress Esthetic (P>.05), and there were also no significant differences among Empress Esthetic, e.max Press and type III gold alloy (P>.05). 2. The average surface roughness of e.max Press after wear test was smallest followed by Empress Esthetic and Ceramco 3, but there was no significant difference between Empress Esthetic and Ceramco 3 (P>.05). 3. There were no significant differences among the depth of wear tracks of all the groups (P>.05). The group that showed the largest width of wear track was Ceramco 3 followed by Empress Esthetic, e.max Press and type III gold alloy. However, there was no significant difference between e.max Press and Empress Esthetic (P>.05), and there was also no significant difference between Empress Esthetic and Ceramco 3 (P>.05). Conclusion: Within the limits of this study, heat-pressed ceramics were not more abrasive than conventional feldspathic porcelain.
박찬용,김덕봉,김충환,권용준,강응철,이창재,최순규,라종필,고진신,Park, Chan-Yong,Kim, Dug-Bong,Kim, Chung-Hwan,Kwon, Yongjoon,Kang, EungCheol,Lee, Changjae,Choi, Soon-Gyu,La, Jongpil,Ko, Jin Sin 한국광학회 2013 한국광학회지 Vol.24 No.1
본 논문에서는 3차원 영상을 위한 LADAR(LAser Detection And Ranging)용 광검출기 모듈을 설계-제작하고 그 특성을 측정한 결과를 보고한다. 광검출기 모듈은 광파이버 어레이와 접속될 수 있도록 200 um 직경을 갖는 InGaAs APD(Avalanche Photodiode)로 설계-제작하였으며, 선형모드 동작 특성을 만족하도록 TIA(Trans-impedance Amplifier)를 설계-제작하였다. 광검출기 모듈을 구성하는 핵심부품들은 12개의 lead pin을 갖는 TO8 상에 집적되었으며, 집적에 필요한 APD 서브마운트 및 TIA 회로 등을 자체적으로 설계-제작하여 사용하였다. 제작한 광검출기 모듈은 450 ps의 rising time과 780 MHz의 대역폭 특성을 보였으며, 0.8 mV 이하의 잡음 특성과, 150 nW의 MDS(Minimum Detectable Signal) 신호 크기에 대해 15 이상의 신호대 잡음비(SNR)를 보임으로써 설계한 모든 특성을 만족하였는데, 이는 저자들이 아는 한 200 um 직경의 대면적 InGaAs APD를 이용한 광수신기에서 가장 우수한 특성을 나타낸 것이다. In this paper, we report design, fabrication and characterization of the WBRM (Wide Band Receiver Module) for LADAR (LAser Detection And Ranging) application. The WBRM has been designed and fabricated using self-made APD (Avalanche Photodiode) and TIA (Trans-impedance Amplifier). The APD and TIA chips have been integrated on 12-pin TO8 header using self-made ceramic submount and circuit. The WBRM module showed 450 ps of rise time, and corresponding 780 MHz bandwidth. Furthermore, it showed very low output noise less than 0.8 mV, and higher SNR than 15 for 150 nW of MDS(Minimum Detectable Signal). To the author's knowledge, this is the best performance of an optical receiver module for LIDAR fabricated by 200 um InGaAs APD.
Avalanche Photodiode의 연구 현황과 전망
박찬용,유지범,김홍만,Park, Chan-Yong,Yu, Ji-Beom,Kim, Hong-Man 한국전자통신연구원 1993 전자통신동향분석 Vol.8 No.1
광통신의 전송용량을 증가시키는 방법의 한가지로 전송속도의 증대에 관한 연구개발이 국내외에서 진행되어 왔다. 전송속도가 증가하여 Gb/s 급 이상이 되면 수신단 전치증폭기의 잡음이 급격히 증가하게 되어 수신감도가 떨어지게 되는데 이는 곧 중계기의 간격 감소로 인한 경제성의 저하를 의미한다. 이러한 수신단의 수신감도 저하를 극복하는 방법의 하나로 내부 이득을 갖는 APD(Avalanche Photodiode)를 수광소자로 사용하고자 하는 연구가 진행되어 왔다. 본 고에서는 InGaAs를 흡수층으로 하는 광통신용 APD의 구조, 동작특성 및 최근 연구동향을 소개하고자 한다.
박찬용,박대원,최재성,길경석,Park, Chan-Yong,Park, Dae-Won,Choi, Jae-Sung,Kil, Gyung-Suk 한국전기전자재료학회 2009 전기전자재료학회논문지 Vol.22 No.9
Transformer failures are mostly due to partial discharges (PDs) caused by the deteriorated insulation. It is, therefore, important to monitor PD occurrence in insulation system and prevent their deterioration. The presented paper deals with a PD detection method by a capacitive probe, which easily apply to cast - resin dry - type transformers. The PD detection system consists of a capacitive probe and a low noise amplifier having the frequency bandwidth of 500 $Hz{\sim}30$ MHz. In the experimental set-up, sensitivity of the system is 7.16 mV/pC.