http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
탄소중립 및 자원순환을 통한 생산자책임재활용제도의 발전방안에 대한 고찰 : 변동 분담금 사례연구
박지환,고은경 한국환경경영학회 2022 환경경영연구 Vol.14 No.-
본 연구에서는 최근 전 세계적으로 화두로 떠오른 ‘탄소중립(Carbon neutrality)’, ‘순환경제 (Circular economy)’, 그리고 전기·전자제품 재활용제도(생산자책임재활용제도)와 ‘변동 분담 금(Modulation fee)’에 대해서 개념적 소개와 세부 내용을 들여다보았다. 유럽연합, 미국, 그리 고 한국에서 적용중인 정책/제도 사례를 중점적으로 살펴봄으로써, 앞으로 나아가야 할 정책 적 방향에 대해서도 함의를 도출하였다. 또한, 한국의 폐전기·전자제품 재활용과 관련된 제도 인 ‘생산자책임재활용제도(환경성보장제도)’의 개념 및 그간의 성과를 짚어보았다. 2008년 환 경성보장제도 탄생 이후, 제도의 양과 질은 점진적으로 고도화 되었으며, 2020년부터 5개 제 품군/50개 제품으로 의무대상 품목이 확대되었다. 이러한 제도적 뒷받침을 토대로 2021년 기 준 약 42만톤의 폐전기·전자제품 회수/재활용 성과를 달성하였다. 한편, OECD 국가(주로 유 럽연합 국가)들을 중심으로, 전기·전자제품의 생산자책임재활용제도 내에서의 분담금 차등화 (differential levy ) 논의가 활발하다. 제품의 설계단계에서 친환경적인 요소들을 일정 기준 이 상 충족할 경우 분담금(단가)의 인센티브(감면)와 패널티(증액)를 적용할 수 있다. 프랑스 중심 의 사례연구를 통해 앞으로 국내에 적용 가능한 분담금 차등화 전략에 대해 고찰하였다. In this study, we reviewed the conceptual introduction and details of Carbon Neutrality, Circular Economy. In addition, we studied current status of Extended Producer Responsibility (EPR) for Electrical and Electronic Equipment (EEE) accordance with Modulation fee, which has recently become a hot topic around the world. By focusing on the cases of policies/systems applied in the European Union, the United States, and Korea, implications were also drawn for the policy direction to future. On the other hand, the concept of the EPR System (“Eco-AS”), a system related to the recycling of waste electric and electronic products in South Korea, and the achievements were reviewed. Since the creation of the environmental security system in 2008, the quantity and quality of the system have gradually advanced, and from 2020, the mandatory products have been expanded to 50 products under the 5 categories. Based on this political and systematical support, about 420,000 tons of waste electric and electronic products were collected/recycled as of 2021. Finally, discussions on modulation fee within the EPR system for electric and electronic products are active, mainly in OECD countries (mainly European Union countries). In the design stage of the product, incentives (cost reductions) and penalties (ost increases) can be applied if eco-friendly elements are satisfied more than a certain standard. Through a Frenchcentered case study, the strategy for differentiating contributions applicable to Korea in the future was considered.
알루미늄 용해 반사로용 gas 배출기의 bag cage에서 발생한 균열의 원인 분석
박지환,박소연,이종권,송태환,류근걸,이윤배 한국산학기술학회 2004 한국산학기술학회논문지 Vol.5 No.5
본 알루미늄 용해반사로 gas 배출기의 bag cage에서 사용 6개월 만에 균열이 발생하였다. 이러한 bag cage의 용접부에서 발생한 균열의 원인조사를 위해 bag cage의 성분분석, 용접부에서의 파단면과 미세조직을 SEM과 금속현미경으로 관창한 결과 bag cage의 균열의 원인이 배기가스중의 황화물과 대기중의 습기, 산소와 반응에 의해 형성된 poly thionic acid이 생성되어 용접에 의해 예민화된 부위에 부식을 일으켰다는 것을 확인할 수 있었다. After 6 month of using, cracking of gas exhaustion bag cage of Type 304 stainless steel wire for Al melting reverberatory furnace was founded in welds. Analysis of crack causes in the wire were tested by electrochemical method, SEM images of structure and analysis of composition. Resulted from the test, it could be observed that cracks in the welds were a accelerated by formed poly thionic acid on surface of bag cage in sensitized region of HAZ, tensile stress and using environment.
유기박막을 이용한 Si기판상의 구리피복층 형성에 관한 연구
박지환,박소연,이종권,송태환,류근걸,이윤배,이미영 한국산학기술학회 2004 한국산학기술학회논문지 Vol.5 No.5
본 논문에서는 Si wafer와 Cu사이의 밀착력을 증가시키기 위해 Si wafer전처리 후 plasma와 SAMs처리 방법에 의한 Cu도금의 형성에 관한 방법을 설명하였다. Si wafer를 Piranha solution과 0.5% HF처리 후 유기박막인 SAMs과 plasma 를 이용하는 방법으로 wafer와 Cu충 사이의 밀착력을 증가시켰다. 도금층의 밀착력은 scratch test 로 측정하였으며, AFM을 이용해 시편에 형성된 패턴의 형태를 관찰하고 SEM과 EDS를 이용해 시편의 조직을 관찰하였다. 그 결과 Si wafer를 O₂, He, SAMs를 혼합처리 했을 때 밀착성이 가장 우수하였다. In order to improve the adhesion properties of copper, MPS(3-mercaptopropyltri~ethoxysilane) organic film were employed. The plasma pretreatment inpure He or He/O₂, mixed gas environment greatly increased adhesion force. Adhesion force was measured by scratch test with nano indenter. Microstructures and surface roughness were observed with scanning electron microscope(SEM). The characteristics of MPSlayer for pretreatment were studied with flourier transform infrared spectroscope(Ff-IR) and contact angle tester. The heighest adhesion was achived in the specimen pretreated with mixed plasma and MPS coating, which was 56mN. Other specimen showed lower value by 20% to 30%. The roughness of substrate was not affected by the bonding strength of copper plating.
박지환,Park, Ji-Whan 대한물리치료과학회 2001 대한물리치료과학회지 Vol.8 No.1
The purpose of this study is through a analysis between old diagnostic tests of the Internet Addiction Syndrome to make a new test model for the physical disturbance problems for the addiction persons. Suggestion treatment for the Internet Addiction Syndrome are follows: 1. Try to decide in advance how much time you will spend on the Net time a day. 2. Decide how much you want the Internet to be a part of each area of your life and then allocate time accordingly. 3. You may decide that you want to keep the Internet at work, and shut the door on it when you leave for home. 4. To physical exercise regularly. 5. Take frequent breaks. 6. Seek out friends and acquaintances who couldn't care less about the Internet. 7. Interact with people in a non-wired world. 8. Consult a Dr. if you can't solved.
박지환,이종권,류근걸,이윤배 한국산학기술학회 2004 한국산학기술학회논문지 Vol.5 No.3
금형부품으로 사용되는 STD11과 STS3의 열처리에 따른 물리적 특성을 비교하여 금형부품으로 사용시 약점으로 지적되어온 물성을 개선시키고자 하였다. STS3와 STD11의 잔류 austenite의 측정과 촉진시효변형시험, Charpy 충격시험결을 실시한 결과 목표경도를 얻기 위한 심냉처리의 효과, 작업안정성과 칫수안정성면에서 STD11이 STS3보다 우수한 것으로 나타났다. STS3에서는 심냉처리에 의한 잔류 austenite의 감소량은 크게 나타나지 않았으며 또한, 변형을 최소화시켜야 하는 금형에서는 심냉처리가 필수적이라는 것을 확인하였다. Using STD11 and STS3 as a mold set, accuracy of a mold product could be improved by heat treatment. Results of Charpy impact test and measurement of retained austenite in STS3 and STD11, STD11 was superior than STS3 in effect of sub-zero treatment and stability of working and measure. Decrease of retain austenite by sub-zero treatment in STS3 did not occured.