http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정지궤도위성의 휠모멘텀 제어에 의해 발생되는 3축 궤도병진 속도에 관한 분석
박영웅(Young-Woong Park),박근주(Keun-Joo Park),김대관(Dae-Kwan Kim),양군호(Koon-Ho Yang) 한국항공우주연구원 2008 항공우주기술 Vol.7 No.2
본 연구에서는 통신해양기상위성 형상을 갖고 휠모멘텀 제어를 위해 추력기를 사용할 때 발생되는 3축 궤도병진 운동에 관하여 분석하였다. 또한, 통신해양기상위성은 롤/요 휠모멘텀 제어를 위해 사용되는 추력기의 성능 감소를 균일하게 하기 위해 주기적으로 조합군을 변경하도록 설계하였기 때문에 조합군 변경시에 발생되는 3축 궤도병진 속도 차이가 발생하게 된다. 따라서 본 연구에서는 COMS 추력기 조합군 변경시 발생되는 3축 궤도병진 속도를 최적화하였다. In this study, triaxial velocity is analyzed for COMS(Communication, Ocean and Meteorological Satellite) configuration, which is generated when thrusters are used to dump wheel momentum. Since COMS is designed to periodically mange the thruster set in order to uniformly decrease the performance of thrusters, triaxial velocity would be different during the change of thruster set. So, the triaxial velocity generated due to the change of thruster set is optimized.
통신해양기상위성의 휠오프로딩 지상국 소프트웨어 검증시험
박영웅(Young-Woong Park),양군호(Koon-Ho Yang) 한국항공우주연구원 2010 항공우주기술 Vol.9 No.2
통신해양기상위성의 정상임무 수행시 자세제어계에 대한 중요한 지상국 소프트웨어에는 궤도위치유지와 휠오프로딩이 있는데, 본 논문에서는 외팔보 태양전지판 형상으로 인해 E3000 heritage로부터 설계 변경을 수행하여 해석을 수행한 휠오프로딩 임무에 대한 지상국 소프트웨어 검증시험을 정리하여 기술하였다. 휠오프로딩 지상국 소프트웨어는 크게 2가지로 구분되는데, 하나는 휠오프로딩을 위한 추력기 조합 변경 시기에서의 변수 변경이고 다른 하나는 위성으로 전달해야 하는 모멘텀 기준값 변경이다. There are two main software in COMS ground station at the normal mode operation - stationkeeping and wheel off-loading. In this paper, ground software validation test for wheel off-loading is summarized and described. The wheel off-loading was performed the design change from E3000 heritage and analyzed. The wheel off-loading of ground software has two part; one is wheel off-loading management for parameters change at the thruster set switching time and the other is wheel off-loading set-point being sent to satellite for the reference momentum.
광전자 촉매시스템(PECS)을 이용한 TiO₂ 코팅 비드의 광분해 효율
박성애(Park, Seong-Ae),하진욱(Ha Jin-Wook),도영웅(Do, Young-Woong),유동식(Yu Dong-Si),이지호(Lee, Ji-Ho) 한국산학기술학회 2007 한국산학기술학회 학술대회 Vol.- No.-
본 연구는 광전자 촉매시스템을 이용해 TiO₂ 졸이 코팅된 구형 비드의 광분해 효율에 대해 고찰한 것이다. TiO₂ 졸이 코팅된 구형 비드인 알루미늄비드, 유리비드, 실리카비드 화이트겔(1 · 2 · 3형) 다섯가지 비드를 사용하였고 실험은 산화환원지시약인 메틸렌블루 수용액이 광촉매의 산화환원반응을 통해 색상 및 흡광도 변화를 통해 환원 정도를 고찰할 목적으로 실행되었다. 소재별 실험 결과, 실험에 사용한 소재 중 실리카비드 화이트겔(1 · 2 · 3형)만이 반응성을 나타냈다. 이들 1 · 2 · 3형은 TiO₂의 함량을 달리한 비드들이며 1형이 가장 적은 함량을 가지며 3형이 가장 많은 함량을 가지고 있다. 실험 결과 3형이 반응성이 가장 좋은 것을 알 수 있으며, 이 실험에서는 코팅물의 함량과 고정물의 상태가 광촉매 반응에 영향을 주는 것을 알 수 있다.
도영웅(Do, Young-Woong),박성애(Park, Seong-Ae),하진욱(Ha Jin-Wook) 한국산학기술학회 2008 한국산학기술학회논문지 Vol.9 No.1
본 논문은 TiO₂(Degussa, P-25), 바인더(A-9540) 그리고 용제의 배합비율을 바꾸어 코팅액을 제조하여 알루미늄 금속판에 코팅한 후, 고농도의 IPA를 주입하여 분해효율을 고찰하였다. 고형분 함량 비율 변화에서는 TiO₂ 함량은 증가하고 바인더가 감소할수록 좋은 효율을 보였고, 용제는 에탄올과 MEK 두 가지 중에 MEK의 분해효율이 좋았다. 용제(MEK)함량 비율 변화에서는 일정량의 용제가 있을 경우 분해효율이 좋았고, 용제함량이 낮아질 경우 코팅액 점도가 높아지고 건조 후에는 표면이 갈라지는 현상을 보였다. 결국, 용제함량 비율 변화는 바인더 함량 실험에도 영향을 주어 1.75 : 0.25 : 10일 때 가장 좋은 분해효율을 보였다. In this paper, The TiO₂ paste was prepared by changing the ratio of TiO₂(Degussa, P-25), binder (A-9540) and solvent. The paste was coated on to aluminuim metal plate to investigate the photodegradation of IPA. The best efficiency was obtained with increasing TiO₂ content and decreasing binder content. MEK is preferred to ethanol in terms of efficiency and the lower amount of solvent enhanced the rate. We, however, found the increasing viscosity of the paste and cracking with the lower content of solvent(MEK). In conclusion, the optimum activity was obtained when the ratio of Ti02, Organic binder(A-9540) and MEK was 1.75 : 0.25 : 10.