한의대생들의 교육과정 만족도 영향 요인 연구 - 전북지역 W대학교 한의과대학 재학생을 중심으로 -

박영규,임규상,Park, Young Kyu,Lim, Kyu Sang 대한한의학방제학회 2021 大韓韓醫學方劑學會誌 Vol.29 No.4

Objective : This is to analyze the factors affecting the satisfaction of curriculum at korean medicine college and suggest the direction of the curriculum reformation of korean medicine colleges. Method : The collected data were conducted multiple linear regression analysis using the SPSS ver.26 statistical program, using 'curriculum satisfaction' as a dependent variable after analyzing the frequency of each variable. Result : The average score for curriculum satisfaction at Korean Medicine college was 2.87 points, which was relatively low. The factors affecting the satisfaction of the curriculum were 'A favorable impression of Korean Medicine College of W University' β=0.351(p<.001), 'connectivity between major subjects' β=0.312(p<.001), 'duplex between major subjects' β=-0.163(p<.05), 'recognition of the importance of Chinese characters' β=0.114(p<.0.5). Conclusion : The curriculum of Korean Medicine College should first, be organized to allow students to be proud of themselves, second, the goal of education should set goals optimized for job competency, third, the content of learning should be consisted of student led problem based learning, fourth, the link between major subjects should be intensified, fifth, the clinical practice time should be expanded significantly and lastly the assessment evaluates the performance process.

HIP처리가 플라즈마 용사된 열차폐 코팅층의 접착강도와 고온특성에 미치는 영향

박영규,김성휘,김두수,이영찬,최철,정진성,김길무,김재철,Park, Young-Kyu,Kim, Sung-Hwi,Kim, Doo-Soo,Lee, Young-Chan,Choi, Cheol,Jung, Jin-Sung,Kim, Gil-Moo,Kim, Jae-Chul 한국재료학회 2000 한국재료학회지 Vol.10 No.4

HIP처리가 가스터빈 고정익 등 고온부품에 적용되는 열차폐 코팅층의 접착강도 및 고온특성에 미치는 영향을 조사하였다. 시편은 IN738LC 초합금 표면에 8wt%Y$_2$O$_3$-$ZrO_2$분말을 플라즈마 용사법으로 코팅한 후 $1200^{\circ}C$, 100MPa의 고온, 고압에서 4시간 동안 HIP 처리하여 준비하였다. 실험결과 HIP 처리된 코팅의 경우 미세균열과 기공이 상당량 감소하였으며 EDX분석을 통해 계면에서 원자간 상호확산이 발생한 것을 확인하였다. 이러한 코팅층의 치밀화 및 상호확산으로 인해 HIP처리된 코팅층의 접착강도는 48% 이상 크게 증가하였으며 조직 또한 균질화 되었다. 반면 가열과 냉각이 반복되는 환경에서 코팅층의 내구력은 HIP 처리된 경우가 다소 저하되었다. 이는 코팅과 모재와의 열팽창 차이로 인한 변형을 완화시켜주는 기공과 미세균열이 감소되었기 때문으로 판단된다. A study has been made to investigate the effects of hot isostatic pressing(HIP ping) on bond strength and elevated temperature characteristics of thermal barrier coating(TBC). The specimens were prepared by HIPping of TBC which is composed of the ceramic top coat(8wt%$Y_2$$O_3$-$ZrO_2$) and the metallic bond coat on the matrix of IN738LC superalloy. The results showed that the porosity and microcracks in the ceramic top coat of TBC were significantly decreased by HIP. As a result, the bond strength of the HIPped coating was increased above 48% compared to that of as-coated specimen and microstructure was homogenized. It was found that the thermal cycle resistance of HIPped coating was inferior to that of as-coated specimen. It was considered that this result was mainly caused by the reduction of internal defects in the top coat layer which could play a role in relaxing the thermal stress due to a large difference in thermal expansion between TBC and matrix.

컨테이너 터미널에서 이웃 베이를 활용한 컨테이너 재정돈 계획

박영규(Young Kyu Park) 한국항해항만학회 2016 한국항해항만학회지 Vol.40 No.3

선박에 싣기 위하여 컨테이너 장치장에서 반출하는 컨테이너 상단에 다른 컨테이너들이 장치되어 있다면 위의 컨테이너들을 임시로 옮기는 작업이 필요한데 이런 작업을 재취급이라 하며, 이로 인하여 장치장의 생산성은 떨어지게 된다. 장치장에서 반출 작업을 수행할 때 재취급 작업을 하지 않도록 하기 위하여, 적하 계획이 수립된 후 선박이 도착하기 전까지의 유휴 시간을 이용하여 컨테이너들을 미리 정리하는 작업을 재정돈 작업이라고 한다. 보통의 경우 베이내의 이동만으로 재정돈 작업 계획을 수립하는데, 컨테이너가 장치된 상태에 따라 너무 많은 시간을 사용한 후 결국 해를 구하지 못하는 경우가 발생한다. 본 논문에서는 이웃한 베이의 상단을 임시 저장 공간으로 활용하여 재정돈 작업계획을 수립할 수 있는 방안을 제안한다. 이 방안이 복잡한 장치상태에서도 허용된 시간 내에 작업 계획을 수립할 수 있다는 것을 보이기 위하여, 수치실험을 통해 제안한 방안의 성능을 평가하였다. 다양한 베이를 대상으로 실험한 결과 복잡한 베이에 대하여 허용된 시간 내에 유효하고 효율적인 계획을 수립할 수 있음을 확인하였다. If there are containers stacked upon the container to be fetched out of a container yard to vessel, rehandling which moves those containers to other places temporarily is needed. In order to avoid such rehandling, remarshalling which rearranges containers should be done before the vessel arrives. The remarshalling plan is commonly generated within a bay. It happens, however, that the generation of the intra-bay remarshalling plan within the permitted time is not possible because of bad stacking conditions. This paper presents the remarshalling algorithm which uses the empty slots of the neighboring bay as a temporary storage space. Simulation experiments have shown that the presented algorithm can generate the remarshalling plan within the permitted time under any staking conditions.

갈색거저리, Tenebrio molitor L.(Coleoptera: Tenebrionidae)의 산란수, 수명, 발육기간 및 번데기 중량

박영규 ( Young Kyu Park ),최영철 ( Young Cheol Choi ),이영보 ( Young Bo Lee ),이상현 ( Sang Hyun Lee ),이준석 ( Jun Seok Lee ),강승호 ( Seung Ho Kang ) 한국잠사학회 2012 한국잠사곤충학회지 Vol.50 No.2

Two different feed(bran and swine feed) effect was tested on development of Tenebrio molitor at 25 ± 5oC, 65 ± 10%RH. There was no significant feed effect on larval developmental periods(80.0 ~ 83.7 days), pupal length (18.1 ~ 18.7 mm) and fecundity(44.3 ~ 55.3 eggs) during first two days. However, fecundity was significantly affected by the pupal weight(P < 0.05), such that the number of eggs 172.3, 191.2, 215.0 gradually increased as pupal weight rose from 0.12 g, 0.15 g to 0.18 g, respectively. During the first two weeks of oviposition was 51.8%, which gradually decreased for further days. Longevity was 27.1 ± 6.9, 30.1 ± 7.8, 27.4 ± 8.5 days with increasing pupal weight of 0.12, 0.15, 0.18 g, respectively. Larval densities of 100, 300, 500 and 700 individuals reared in the container (16 × 21.5 × 7 cm) resulted 67.9% of the T. molitor pupation during first three weeks. Pupal weight was decreased 146.9 ± 6.5, 142.1 ± 8.3, 122.0 ± 9.6, 118.5 ± 5.2 mg when it was reared at different larval densities of 100, 300, 500 and 700 individuals, respectively in size of(16 × 21.5 × 7 cm) rearing container.

주식양도소득세 변천과 주식거래에 대한 영향

박영규(Young-Kyu Park) 강원대학교 경영경제연구소 2020 Asia-Pacific Journal of Business Vol.11 No.2

Purpose - This study seeks to summarize the tax changes in stock trading and analyze K-OTC stock trading data in 2017 and 2018 to infer the effects of the application of capital gains taxes by individual investors. Design/methodology/approach - This study analyzes the case of the expansion of the 2018 capital gains tax exemption in the K-OTC market, which exempts capital gains tax on the proceeds from the sale of individual investors of certain stocks under the temporary special law. Findings - In the K-OTC market, the amount of transactions has expanded since the capital gains tax exemption in 2018, but the volume of transactions and transaction turnover have decreased. In particular, the result of lower transaction turnover after the expansion is contrary to expectations. To control the macroscopic effects of the stock market, further analyses the transactions of capital gains tax-exempt stocks and non-exempt stocks. The turnover rate of exemption stocks is higher than that of the non-exempt stocks. In the case of transaction turnover, the two results are not consistent. However, the latter result is more meaningful because the comparison of exempt and non-exempt reduces distortion by macro effects. Research implications or Originality - To mitigate the impact of capital gains taxes on stock market, government authorities need to consider the gradual expansion of the scope of taxation, the application of separate taxation in the introduction of capital gains, the reduction tax rate on transfer income of listed shares, and the reduction tax rate on long-term holdings.

도시보건소 결핵검사 요원의 객담검사에 관한 조사연구

박영규 ( Young Kyu Park ) 대한결핵 및 호흡기학회 1980 Tuberculosis and Respiratory Diseases Vol.27 No.2

연구논문 : 자기주식매입의 유상증자에 대한 신호효과

박영규 ( Young Kyu Park ) 한국재무관리학회 2008 財務管理硏究 Vol.25 No.1

산지이용구분제도의 개선방안 연구

박영규 ( Young Kyu Park ),전준헌 ( Jun Heon Jeon ),노혜정 ( Hye Jung Roh ) 한국산림과학회 2009 한국산림과학회지 Vol.98 No.6

국내 주식형펀드시장에 대한 성과평가연구

박영규(Young Kyu Park),장욱(Uk Chang) 한국증권학회 2001 Asia-Pacific Journal of Financial Studies Vol.29 No.1

시뮬레이션 기법을 활용한 친환경적 건축물 높이 예측 프로그램 개발

박영규 ( Young Kyu Park ),전준헌 ( Jun Heon Jeon ),노혜정 ( Hye Jung Roh ),권순덕 ( Soon Duk Kwon ) 한국지리정보학회 2009 한국지리정보학회지 Vol.12 No.3

본 연구에서는 GIS기반의 공간분석과 시뮬레이션기법을 활용하여 산림스카이라인 및 자연경관훼손을 사전에 검증할 수 있는 친환경적 건축물 높이 예측 프로그램을 개발하고 현지적정성을 검토하였다. 건축물의 높이 예측과 같은 경관평가에 조망점의 위치 등의 선정방법이 큰 영향을 미치는 요인이므로 GIS의 지형분석과 가시권분석을 이용하여 자동조망점을 선정하고, 기존의 조망점 선정방법과의 차이를 통계적으로 검증하였다. One-way ANOVA를 이용하여 분석한 결과 모든 사례지역에서 조망점 선정방법에 따른 평균값의 차이가 없는 것으로 평가되었다. 이에 따라 자동조망점 선정방법으로 프로그램을 개발하고, 필요에 따라 추가 조망점을 선정할 수 있도록 설계하였다. 개발된 프로그램을 이용하여 5개 사례지역에 시뮬레이션을 적용한 결과, 산림경관 및 주변 환경과 조화로운 것으로 나타났다. 다만, 등고선을 기준으로 건축물 높이를 예측하였기 때문에 건축물 값이 다소 낮게 나온 경향이 있으므로 향후연구에서는 나무의 높이와 같은 산림요소에 대한 고려가 필요하다. In this study, we intended to develope a simulation program for assessing a building height whether or not acceptable for maintaining the visual quality of a forest landscape. A number of geographical factors were considered within the assessment procedure. As the visual quality of a landscape could vary according to the location of view points, we examined 3 methodologies for setting up the view points. The result for comparison between method of selecting viewpoints was not significantly effecting method of selecting viewpoints. Post hoc test showed a moderately large p-value and no significant differences between groups were observed. The result from a case study indicated that the simulation program is able to estimate an environmentally acceptable building height in an efficient manner. In this study, however, only the geographical factors were considered for the assessment, but forest dynamic information such as stand height was not considered. Thus, in the further study, forest stand height would be necessarily considered to estimate a more reliable and desirable building height.