http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박성열(Seong-Yeol Park),이강혁(Gang-Hyuck Rhee),남윤효(Yun-Hyo Nam),류민영(Min-Young Lyu) 한국고분자학회 2016 폴리머 Vol.40 No.3
사출성형은 충진, 보압, 냉각 그리고 취출의 단계를 거치는데 수지의 가소화는 냉각단계에서 이루어진다. 냉각시간 이내에서 사출장치에서는 스크류 회전에 의한 계량이 완료되어야 하므로 빠른 시간 내에 수지를 녹일 수 있는 가소화의 연구가 필요하다. 본 연구에서는 사출성형기용 스크류에서 PP 수지의 가소화에 관하여 실험을 수행하였다. 실험에 사용한 스크류는 스탠다드 스크류와 배리어 스크류이다. 각각의 스크류에 대하여 RPM에 따른 실험결과를 비교하였다. 계량 후 정상적인 가소화 상태에 도달한 후 토출량, 배압 그리고 토크를 측정하였다. 또한 배럴에서 스크류를 빼내어 스크류 채널에 붙어 있는 수지의 단면을 관찰하여 용융 현상을 파악하였다. 그리고 용융 시작점과 용융 완료점을 관찰하여 용융길이의 비교를 통해 두 종류의 스크류에서 가소화 능력을 분석하였다. Injection molding consists of a series of process, filling, packing, cooling, and then ejection. Resin in the cylinder of injection unit should be rapidly plasticated before a metering region within cooling time. In this study, plastication of PP resin inside a cylinder of an injection molding machine was investigated. The screws used for the experiment were a standard screw and a barrier screw. The length of melted resin (plastication) was compared for RPM. When steady state reached after plastication, the throughput, back pressure, and torque values were measured and compared. After pull out the screw, the cross-section of the resin adhered on the screw channel was investigated. The degree of plastication, and the length of melted resin, which indicates the start and end of resin melted on the screw, were investigated for each screw.
효율적인 패턴 분류를 위한 ART2 알고리즘에서의 경계 변수 설정 방법
박성열(Seong-Yeol park),우영운(Young Woon Woo),김광백(Kwang-Baek Kim) 한국멀티미디어학회 2008 한국멀티미디어학회 학술발표논문집 Vol.2008 No.1
ART2 알고리즘은 신경 회로망 모델로서 실시간 학습이 가능하여 저속 및 고속을 지원할 뿐만 아니라 지역 최소화(local minima) 문제가 발생하지 않는 장점을 갖는다. 그러나 ART2 알고리즘은 경계 변수 설정에 따라 클러스터의 수가 달라지며, 이러한 경계 변수 설정은 여러 번의 실험을 통해 경험적으로 최적의 경계 변수를 설정해야 하는 단점이 있다. 따라서 본 논문에서는 ART2 알고리즘에서 효율적으로 경계 변수를 설정하기 위해 패턴셋 설정을 통한 경계 변수 설정 방법을 제안한다. 제안된 경계 변수 설정 방법의 성능을 평가하기 위해 숫자 및 영문 패턴을 대상으로 실험한 결과, 패턴 분류의 정확성에 있어서 효과적임을 확인할 수 있었다.