http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박상근,윤용기,Park, Sang-Keun,Yoon, Yong-Gi 한국교육녹색환경연구원 2013 교육·녹색환경연구 Vol.12 No.2
Low birthrate is causing a reduction in the number of students at kindergartens, elementary schools, middle schools and high schools nationwide and yet, school safety accidents are on a constant rise, which was reported to be 237 accidents a day on average in 2011. Such phenomenon is proving how the school safety policy is not doing what it was supposed to do. In order to decrease the school safety accidents, first, causes of the accidents should be analyzed and then, prevention measures should be designed. For that reason, the study looked into the present condition of the school safety accidents and safety accident theories and based on the results, "School Safety Accident Analysis Matrix Model" was proposed. With a matrix method of the accident types (17 of them) and hazard factors (9 of them) applied, the concerned model analyzed a total of 153 accident causes. In consideration of the results from the analysis, the study suggested that the education authority should open a safety organization and design a school safety policy that would systematically deal with safety education, prevention measures practice, accident investigation and analysis, and countermeasures practice as well.
델파이 기법을 활용한 학교안전사고 예방정책에 관한 연구
박상근,윤용기,Park, Sang-Keun,Yoon, Yong Gi 한국교육녹색환경연구원 2015 교육·녹색환경연구 Vol.14 No.2
본 연구는 지속적으로 증가하고 있는 학교안전사고를 저감시키기 위한 방안으로 델파이 기법을 활용하여 학교안전사고 예방정책을 제시하는데 목적이 있다. 델파이 조사결과 분야별 학교안전사고 예방정책 개선 방안은 다음과 같다. 첫째, 학교시설을 기획, 설계 및 시공, 유지관리, 평가 등 4단계로 구분하여 체계적인 안전정책을 수립할 필요가 있다. 둘째, 학교안전정책이 학교현장에서 유용한 대책으로 활용되기 위해서는 시설안전 담당자들이 부담으로 느끼는 책무성과 예산상 한계를 극복할 수 있는 연구가 필요하다. 셋째, 예방대책이 지속적으로 안전정책에 반영되기 위해서는 각 분야별 관련부서의 검토를 통하여 해당 법령이 개정되도록 노력할 필요가 있다. The purpose of this study is to suggest school safety accidents prevention policy by applying delphi technique as a method to decrease school safety accidents which have been increasing consistently. As results of Delphi, the plans to improve school safety accidents prevention policy per area are as follows: First, it is required to establish systematic safety policy by dividing school facilities into four stages such as planning, designing and building, maintenance and evaluation etc. Second, it is required studies to overcome budget limitation and accountability of people in charge of safety of facilities to apply school safety policy as a useful measure. Third, it is required to make an effort to revise relevant legislations through examinations of relevant government ministries per each area to reflect prevention measures to safety policy consistently.
Feedforward와 Defected Ground Structure를 이용한 주파수 체배기 설계
박상근,임종식,정용채,김철동,Park Sang-Keun,Lim Jong-Sik,Jeong Yong-Chae,Kim Chul-Dong 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.8
Feedforward와 defected ground structure(DGS)를 이용한 새로운 주파수 체배기를 제안하였다. 제한된 주파수 체배기는 feedforward 구조에 의해 기본 주파수$(f_0)$가 제거되고, 아령 또는 나선형 모양의 DGS 구조에 의해 2차, 3차 또는 4차의 원하지 않는 고조파 성분들을 제거할 수 있었다. 결국 feedforward와 DGS 구조에 의해서 체배하고자 하는 성분을 제외한 나머지 고조파들이 제거되었다. 기본 주파수를 1 GHz로 하여 주파수 체배기를 설계하고, 측정하였다. 입력 전력을 0dBm으로 하였을 때 2체배기, 3체배기와 4체배기의 출력 전력은 각각 -2.59 dBm, -5.36 dBm과 -4.57 dBm이었다. A novel design of frequency multiplier using a feedforward technique and a defected ground structure(DGS) is proposed. The feedforward loop in the proposed frequency multiplier suppresses the fundamental component $(f_0)$, the dumb-bell or spiral shaped DGS diminish unwanted harmonics such as second, third and fourth. Due to the combination of the feedforward structure and the DGS, only the multiplied frequency component$(2f_0,\;3f_0,\;4f_0)$ appears at the output port and the other unwanted components are suppressed excellently. The frequency multiplier is designed at 1 GHz $(f_0)$, by the proposed technique and measured. The measured output power of $2f_0,\;3f_0$ and $4f_0$ is -2.59 dBm, -5.36dBm and -4.57dBm, respectively, when the input power is 0dBm.
수경화성 폴리우레탄 도막 방수재의 물 혼합비에 따른 물성변화연구
박진상,박완구,김동범,이민규,오상근,Park, Jin-Sang,Park, Wan-Goo,Kim, Dong-Bum,Lee, Min-Kyu,Oh, Sang-Keun 한국건설순환자원학회 2015 한국건설순환자원학회 논문집 Vol.3 No.4
현재 국내에서 가장 많이 시공되고 있는 우레탄 방수재는 시공이 간편하고 이음매 없이 도막을 만들 수 있다는 장점을 가지고 있지만, 저온 및 낮은 습도에서 경화지연 및 도막 두께의 제한과 같은 결점이 있어서 현장 시공 시에 물을 강제적으로 혼합하여 경화시키는 방법인 수경화성 폴리우레탄 방수재가 해결방안으로 제시되고 있다. 하지만, 수경화성 폴리우레탄 방수재는 경화제로 사용하는 물 혼합비에 따라 방수성능 및 현장 시공성에 어떠한 영향을 주게 되는지에 대한 객관적이고 정량적인 평가가 없는 실정이다. 따라서 시공현장에서는 객관적인 기준 없이 작업자의 판단에 따라 물을 혼합하여 시공하고 있어서 일정한 성능과 품질을 얻을 수 없는 문제점이 있다. 따라서, 본 연구에서는 수경화성 폴리우레탄 방수재가 폭 넓게 적용되는 계기를 만들기 위하여, 물 혼합비에 따른 성능의 변화를 정량적인 근거를 바탕으로 평가, 분석하여 적정한 물 혼합비 제안을 위한 기초적 자료를 마련하기 위해 진행하였다. 연구의 방법은 수경화성 폴리우레탄 방수재의 물 혼합비(0%, 5%, 10%, 15%, 20%, 25%, 30%, 40%, 50%)에 따른 객관적 성능 평가를 통해 결과 값을 도출하고 비교 분석하여 혼합비별 물성변화 특성을 파악한 후 이를 데이터 베이스화 하여 가장 적정한 물 혼합비 제안을 위한 기초적인 자료로 활용 가능할 수 있도록 결과를 제시하였다. Urethane waterproofing materials which currently being used most commonly in the Korean domestic market have high applicability and construct layers without forming any joints, but under the influence of low temperature and low humidity, as well as the thickness of the applied layer, the curing time of this material may become extended in construction sites. To resolve these issues, a proposed method of using water-hardening type of polyurethane waterproofing materials are being developed. However, there currently lacks any standards or evaluation methods on determining an optimal mixture ratio of water for the water-hardening polyurethane waterproofing materials. Therefore, workers and construction workers are relying on their hands-on-skills and experience to determine this ratio and are not able to obtain a consistent performance quality out of these materials. Therefore, for the establishment of a board applicability of the water-hardening polyurethane waterproofing methods in construction sites, this study objectively analyzes the changes in the performance of these materials depending on the changes of the water mixture ratio and attempts to procure the optimal ratio on the basis of forming a provisionary standard. The study prepares mixtures of varying ratio(no water added, 5, 10, 15, 20, 25, 30, 40 and 50) and conducts comparative analysis respective mixtures' performances and their changes in the physical properties in an objective manner and proposes a provisional optimal value that can serve as a data base that can be used as a reference for future studies.
폴리우레탄 방수재의 숯 첨가량에 따른 인장성능 변화추이 연구
박진상 ( Park Jin-sang ),김동범 ( Kim Dong-bum ),박완구 ( Park Wan-goo ),하미영 ( Ha Mi-young ),김병일 ( Kim Byoung-il ),오상근 ( Oh Sang-keun ) 한국건축시공학회 2017 한국건축시공학회 학술발표대회 논문집 Vol.17 No.2
Polyurethane coating materials are widely used in waterproofing construction because they ensure easy workability and high performance mechanical properties, and such polyurethane coating materials are in various mixture ratios. This study carried out a test to determine the basic physical property changes of polyurethane coating material based on the amount of charcoal additives to. The results showed that he tensile strength was found to be 3.1 N / ㎟ when the charcoal amount was at 2%, displaying the highest performance rate.