http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수경화성 폴리우레탄 도막 방수재의 물 혼합비에 따른 물성변화연구
박진상,박완구,김동범,이민규,오상근,Park, Jin-Sang,Park, Wan-Goo,Kim, Dong-Bum,Lee, Min-Kyu,Oh, Sang-Keun 한국건설순환자원학회 2015 한국건설순환자원학회 논문집 Vol.3 No.4
현재 국내에서 가장 많이 시공되고 있는 우레탄 방수재는 시공이 간편하고 이음매 없이 도막을 만들 수 있다는 장점을 가지고 있지만, 저온 및 낮은 습도에서 경화지연 및 도막 두께의 제한과 같은 결점이 있어서 현장 시공 시에 물을 강제적으로 혼합하여 경화시키는 방법인 수경화성 폴리우레탄 방수재가 해결방안으로 제시되고 있다. 하지만, 수경화성 폴리우레탄 방수재는 경화제로 사용하는 물 혼합비에 따라 방수성능 및 현장 시공성에 어떠한 영향을 주게 되는지에 대한 객관적이고 정량적인 평가가 없는 실정이다. 따라서 시공현장에서는 객관적인 기준 없이 작업자의 판단에 따라 물을 혼합하여 시공하고 있어서 일정한 성능과 품질을 얻을 수 없는 문제점이 있다. 따라서, 본 연구에서는 수경화성 폴리우레탄 방수재가 폭 넓게 적용되는 계기를 만들기 위하여, 물 혼합비에 따른 성능의 변화를 정량적인 근거를 바탕으로 평가, 분석하여 적정한 물 혼합비 제안을 위한 기초적 자료를 마련하기 위해 진행하였다. 연구의 방법은 수경화성 폴리우레탄 방수재의 물 혼합비(0%, 5%, 10%, 15%, 20%, 25%, 30%, 40%, 50%)에 따른 객관적 성능 평가를 통해 결과 값을 도출하고 비교 분석하여 혼합비별 물성변화 특성을 파악한 후 이를 데이터 베이스화 하여 가장 적정한 물 혼합비 제안을 위한 기초적인 자료로 활용 가능할 수 있도록 결과를 제시하였다. Urethane waterproofing materials which currently being used most commonly in the Korean domestic market have high applicability and construct layers without forming any joints, but under the influence of low temperature and low humidity, as well as the thickness of the applied layer, the curing time of this material may become extended in construction sites. To resolve these issues, a proposed method of using water-hardening type of polyurethane waterproofing materials are being developed. However, there currently lacks any standards or evaluation methods on determining an optimal mixture ratio of water for the water-hardening polyurethane waterproofing materials. Therefore, workers and construction workers are relying on their hands-on-skills and experience to determine this ratio and are not able to obtain a consistent performance quality out of these materials. Therefore, for the establishment of a board applicability of the water-hardening polyurethane waterproofing methods in construction sites, this study objectively analyzes the changes in the performance of these materials depending on the changes of the water mixture ratio and attempts to procure the optimal ratio on the basis of forming a provisionary standard. The study prepares mixtures of varying ratio(no water added, 5, 10, 15, 20, 25, 30, 40 and 50) and conducts comparative analysis respective mixtures' performances and their changes in the physical properties in an objective manner and proposes a provisional optimal value that can serve as a data base that can be used as a reference for future studies.
무작위 데이터 근사화를 위한 유계오차 B-스플라인 근사법
박상근(Sangkun Park) (사)한국CDE학회 2012 한국CDE학회 논문집 Vol.17 No.4
This paper presents an error-bounded B-spline fitting technique to approximate unorganized data within a prescribed error tolerance. The proposed approach includes two main steps: leastsquares minimization and error-bounded approximation. A B-spline hypervolume is first described as a data representation model, which includes its mathematical definition and the data structure for implementation. Then we present the least-squares minimization technique for the generation of an approximate B-spline model from the given data set, which provides a unique solution to the problem: overdetermined, underdetermined, or ill-conditioned problem. We also explain an algorithm for the error-bounded approximation which recursively refines the initial base model obtained from the least-squares minimization until the Euclidean distance between the model and the given data is within the given error tolerance. The proposed approach is demonstrated with some examples to show its usefulness and a good possibility for various applications.
박진기 ( Jin-ki Park ),배상근 ( Sang-geun Bae ),이동호 ( Dong-ho Lee ),신형섭 ( Hyoung-sub Shin ),박종화 ( Jong-hwa Park ) 한국농공학회 2017 한국농공학회 학술대회초록집 Vol.2017 No.-
농업분야에서 원격탐사 기술은 고고도 항공사진 및 위성영상을 이용하여 농지 실태 파악, 농업 생산량 파악, 농작물 피해 파악 등에 활용되고 있으며 원격탐사 자료를 적용하는 사례 및 활용 범위는 넓어지고 있다. 원격탐사 활용 방안 중 무인항공기의 활용은 기존 중·저해상도 위성영상의 공간해상도와 고해상도 위성영상의 시간해상도(주기성)의 단점을 보완해주는 좋은 대안으로 부각되고 있다. 또한 무인항공기의 발전, 영상처리 및 분석기술의 발전으로 다양한 분야에 활용성이 높아지고 있다. 본 연구는 충청북도 청주시 북이면을 대상으로 무인항공기 영상을 분석하여 작물 분류를 실시하고자 하였다. 사용된 무인항공기는 스위스 Sensefly사의 고정익 무인항공기이며, 탑재된 촬영 센서는 Sony Cybershot WX로 1,820만 화소이다. 충청북도 청주시 북이면의 전체 면적은 38.2㎢이며, 무인항공기 촬영은 2016년 8월 5일부터 8월 6일까지 15회 실시하였다. 무인항공기로 촬영된 영상은 정사영상으로 제작하였으며, 스마트팜맵을 연계하여 공간자료로 구축하였다. 영상처리는 객체기반 분류 기법을 사용하였다. 작물 분류 항목은 벼, 고구마, 들깨, 옥수수 등 22개 작물과 건물, 도로, 하천, 산림 등 비작물 8개 항목으로 총 30개로 설정하였다. 그 결과 작물 분류 정확도는 6,822필지 중 4,806필지(70.4%)가 일치하며 2,016필지(29.6%)가 불일치하는 것으로 분석되었다. 일치하는 면적은 15.06㎢(농경지 면적) 중 12.77㎢가 일치하여 84.8%의 정확도를 나타냈다. 작물 분류 정확도 분석결과 필지 정확도 보다 면적 정확도가 14.4% 높게 나타나는 것을 알 수 있다. 이는 소규모 필지 보다 면적이 큰 필지의 정확도가 높게 나타나 면적 정확도에 영향을 준 것으로 판단된다. 본 연구를 바탕으로 무인항공기 영상의 농작물 분류 가능성을 확인하였으며, 이를 통해 농업 통계의 활용 가능성과 정밀 농업 정보 획득에 유용하게 활용될 것으로 판단된다.
박상근(Park, Sangkun) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.4
본 연구는 볼트강도등급 10.9에 의해 추천되는 조임 토크 640~800(Nm)가 볼트-너트 체결체에 가해졌을 때 풀림 방지를 위한 코일 스프링의 삽입 및 시뮬레이션 기반 설계 최적화에 관한 것이다. 먼저 볼트-너트-코일스프링으로 구성된 조립체에 대하여 등가응력에 기반을 둔 구조 안전성 판단을 위한 조립체 구조해석 시뮬레이션을 수행한다. 그리고 이러한 해석 시뮬레이션 결과로부터 설계 개선안 도출을 위한 설계전략을 수립한다. 또한 이 전략 안에서 기존 설계의 성능을 개선 해 나가는 반복 과정을 제안한다. 이 과정에서는 먼저 반응표면법을 사용하여 설계 파라미터 후보점을 찾고, 그 후보점의 반응값과 실제 시뮬레이션 결과를 비교함으로써 설계 후보점(코일스프링 감감수 N = 6)이 최적인지를 검증한다. This study deals the optimization design with the simulation based design of a coil spring inserted into the lock nut for preventing the screw thread from loosening at the bolted joint when the high-strength steel bolt with the property class of 10.9 is used and the screw torque of 640 to 800 (Nm) is applied. In this study, structural analysis of assembly composed of bolt, nut and coil spring is carried out to evaluate its safety factors on the basis of the equivalent stress with commercial finite element analysis software. And the design strategy to extract the design improvement from these simulation results is established. An iterative process performed with the proposed design strategy is also proposed for improving the performance of the existing design. At the proposed procedure, the feasible design parameters using response surface method are found, and then these parameters are verified to be optimal or not by comparing with the response values and the simulation results obtained from the feasible parameters.