RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재후보

        단상 센서리스 PFC 컨버터의 직류출력전압 제어에 관한 연구

        문상필,강욱중,권순걸,서기영 한국조명전기설비학회 2003 조명·전기설비학회논문지 Vol.17 No.2

        일반적인 단상 PFC 컨버터는 직류전압을 일정한 기준값으로 제어할 수 있으나 시스템의 구성상 직류전압과 교류전압 및 전류등을 검출하여 제어하기 때문에 전체적으로 제어 시스템이 복잡하고, 가격이 비싸며, 신속성등의 문제점들이 대두되어지고 있다. 이러한 문제점들을 해결하기 위하여 본 논문에서는 센서리스 PFC 컨버터 회로를 제안하여 교류 전압파형 검출만으로 전체 시스템을 간단하게 제어하였다. 그리고 초퍼회로에서 제어된 전압량 Kd(Ed/Ea)에 의해서 직류출력전압을 직접적으로 제어하였으며, 직류출력전압의 변동율이 회로의 파라미터에 따른 변화의 특징에 대해서 서술하였다. 이러한 모든 사항아느 실험을 통하여 타당성을 증명하였다. The conventional single phase PFC converter can control DC voltage to steady standard value but control system is system is complex and expensive and has rapidity problems because of controlled by detecting DC voltage, AC voltage and current. In order to solve those problems, this paper proposes senseless PFC converter circuit. The proposed circuit can control the whole system by detecting AC voltage waveform And it directly controlled DC output voltage by the controlled voltage value Kd(Ed/Ea). The fluctuation ratio of DC output voltage is changed by the circuit characteristics These characteristics are confirmed by some experimental results.

      • KCI등재
      • 에어컨 전력변환장치의 고조파 개선에 관한 연구

        문상필,서기영,이현우,정상화,Mun, Sang-Pil,Suh, Ki-Young,Lee, Hyun-Woo,Jung, Sang-Hwa 대한전자공학회 2002 電子工學會論文誌-SC (System and control) Vol.39 No.5

        To improve the current waveform of diode rectifiers, we propose a new operating principle for the voltage -doubler diode rectifiers. In the conventional voltage-doubler rectifier circuit, relatively large capacitors are used to boost the output voltage, while the proposed circuit uses smaller ones and a small reactor not to boost the output voltage but improve the input current waveform. A high input power factor of 97[%] and an efficiency of 98[%] are also obtained. The harmonic guide lines of proposed rectifier is no interfered with inverter switching, resulting in a simple, reliable and low-cost ac-to dc converters in comparison with the boost-type current-improving circuits.It compared conventional pulse-widthmodulated(PWM)inverter with half pulse-widthmodulated (HPWM) inverter. Proposed HPWM inverter eliminated dead-time by lowering switchingloss and holding over-shooting. 다이오드 정류회로의 전류 파형을 향상시키기 위해서 배전압 다이오드 정류회로에 대한 새로운 동작원리를 제안하였다. 기존의 배전압 정류회로는 대용량 캐패시터를 이용하여 출력전압을 높였으나 제안한 회로는 소용량의 캐패시터와 리액터를 이용하기 때문에 출력전압은 높아지지 않지만 입력전류의 파형을 개선할 수 있다. 그리고 역률과 효율이 각각 97[%], 98[%]을 얻을 수 있다. 제안한 정류기는 고조파 규제값과 스위치가 서로 영향을 미치지 않고 다이오드와 인덕터 그리고 콘덴서로 구성된 비선형 임피턴스 회로이다. 또한 일반적인 펄스 폭 변조 인버터와 하프 펄스 폭 변조 인버터를 비교하여 설명하였으며 제안된 하프 펄스 폭 변조 인버터에 의해서 낮은 스위칭 손실과 오버슈팅을 제어할 수 있다.

      • 새로운 고효율 소프트 스위칭 3상 PWM 정류기

        문상필,서기영,이현우,권순걸,Mun Sang-Pil,Suh Ki-Young,Lee Hyun-Woo,Kwon Soon-Kurl 대한전자공학회 2005 電子工學會論文誌-SC (System and control) Vol.42 No.2

        새롭게 개발되어진 소프트 스위칭 3상 PM 정류기는 간단한 회로 구성과 고효율을 가지고 있다. 제안한 회로는 ARCP 컨버터의 한 종류이다. 기존의 ARCP 컨버터는 3상 보조 리액터와 소프트 스위칭 보조 회로를 6개의 보조 스위치, 각 스위치의 게이트 구동 회로, 제어회로가 필수적이나 결과적으로 이 회로는 높은 손실을 가지고 있다. 본 논문에서 제안한 주 회로는 두 개의 보조 리액터와 두 개의 스위치와 각각의 다이오드로 구성되는 보조 소프트 스위칭 회로이다. 부가적으로 두 개의 주 스위치와 간단한 보조 스위치의 제어회로는 PWM 제어 회로로 만들어지며, 공통으로 사용하였다. 소프트 스위칭 보조 회로의 작용을 의미하며, 주 스위치는 WS로 동작되고, 보조스위치는 ZCS로 동작된다. 본 논문에서 제안한 회로의 구성과 동작 원리를 설명하였으며, 실험결과에 의해서 증명하였다 용랑5[kW]의 시작품을 사용하여 변환효율은 최대$98.8[\%]$과 역률$99[\%]$를 얻었다. A new soft switching three-phase PWM rectifier with simple circuit configuration and high efficiency has been developed. The proposed circuit is a kind of the auxiliary resonant commutated Pole(ARCP)converter The conventional ARCP converter requires three-auxiliary reactors and six-auxiliary switches for the soft switching auxiliary circuit and for these switching elements, a gate drive circuit and a control circuit are required, resulting in high part as a disadvantage. In the main circuit proposed in this paper, the auxiliary soft switching circuit is composed of two-auxiliary reactors, two-auxiliary switches and several diodes. In addition, common use of the PWM control circuit for two-switches will make the control circuit of the auxiliary switches simple. By means of function of the soft switching auxiliary circuit, the main switching element performs zero voltage switching operation and the auxiliary switches perform the zero current switching. In this paper, the circuit configuration and the operational analysis of the proposed circuit are described at first and then, experimental results will be reported. By using a prototype with 5[kW] capacity, the conversion efficiency of maximum $98.8[\%]$ and the power factor of $99[\%]$ or higher were obtained.

      • 유도가열용 ZCS PWM SEPP 고주파 인버터

        문상필,권순걸,이종걸,주석민,강신출 한국조명·전기설비학회 2008 한국조명·전기설비학회 학술대회논문집 Vol.2008 No.10월

        This research presented the new zero-current switching pulse width modulation SEPP(Single Ended Push-Pull)high frequency inverter for solving the problem of the zero-current SEPP high frequency inverter circuit which is using widely in the practical application of an induction heating apparatus, the soft switching operation and power control are impossible when the lowest power supply in the zero-current switching pulse width modulation SEPP high frequency inverter. The inverter circuit which is attempted by on-off operation of a switch has the reduction effect of the power loss due to a soft switching and a high frequency switching. And it confirmed that the power regulation is possible continuously from 0.25[㎾] until 2.84[㎾] in the case the duty rate(D) changes from 0.08 to 0.3 under zero-current switching operating by a dissymmetry pulse width modulating control and the power conversion efficiency comes true the efficiency of 95[%]. Due to the result above, the ZCS PWM SEPP high frequency inverter will be effective as sources of an induction heating apparatus.

      • KCI등재

        하이브리드 조립형 보강 기법을 적용한 철근콘크리트 보의 휨 성능 평가에 관한 실험적 연구

        문상필,이성호,이영학,김민숙,Moon, Sang Pil,Lee, Sung Ho,Lee, Young Hak,Kim, Min Sook 한국공간구조학회 2020 한국공간구조학회지 Vol.20 No.4

        In this paper, the hybrid prefabricated retrofit method is suggested and examined. Six specimens were manufactured in order to evaluate their flexural performance of RC beams. Test parameters include the added beam depth, the thickness of bottom plate, the number of the steel plate with openings. The effects of these parameters on the flexural performance of reinforced concrete beams were examined. The load-deflection behavior and modes of cracks are presented from the test results. At the test result, the flexural capacity and the ductility of the hybrid prefabricated retrofit method was increased satbly. Also, comparing the flexural performance of RC beam and retrofitted RC beams, it was increased that the flexural strength is about 3.3 times, the ductility is about 2.55 times, and energy dissipation capacity is about 7.34 times.

      • KCI등재

        계단형 외팔보의 등가보 변환에 의한 기본고유진동수 해석

        문상필,홍순조,Moon, Sang-Pil,Hong, Soon-Jo 한국전산구조공학회 2008 한국전산구조공학회논문집 Vol.21 No.4

        The natural frequency of a beam plays an important role in not only vibration analysis but also understanding its dynamic characteristics. It is complicated to analyse the natural frequency of a stepped beam with discontinuously varying section. Approximate analysis methods such as Rayleigh-Ritz method, FEM, etc. are frequently used for the vibration analysis of stepped beams. In such a case, accuracy of these methods depends upon the number of partitioned elements, the number of the iterations in calculation and the assumed mode shape. This study presents an approximate analysis method for the fundamental natural frequency analysis of stepped cantilever beam, using equivalent beam transformation technique. Validity and usefulness are verified by comparing the proposed method with FEM for several example problems. 보의 고유진동수는 진동해석 뿐만 아니라 구조물의 동적특성을 파악하는데 중요한 역할을 한다 보의 단면이 불연속적으로 변하는 계단형 보의 고유진동수 해석은 복잡하다. 이런 계단형 보의 진동해석은 Rayleigh-Ritz법, FEM 등과 같은 근사해석법이 흔히 사용되는데 이들 해석의 정확성은 분할요소의 수, 계산의 반복수, 가정처짐곡선의 형상에 따라 좌우된다. 본 연구에서는 계단형 외팔보의 등가보 변환 방법을 이용한 기본고유진동수의 근사해석방법을 제시하고자 하였으며 여러 예제에 대하여 제안방법과 유한요소해석 결과를 비교하여 그 적용성과 신뢰성을 검증하였다.

      • 공생주의 관점의 필란트로피(Philanthropy) 고찰

        문상필 통일사상학회 2022 통일사상연구 Vol.23 No.-

        본 연구는 공생주의의 구현을 위한 실용적 관점에서 하나의 방법론으로 필란트 로피의 개념과 내용을 밝히는 것이다. 『통일사상요강』은 공생주의를 이상세계의 경 제이념으로 설명하고 있다. 그 이상적 경제이념이 현실 속에서 구현되기 위해서는 경제와 함께 사회적인 가치에 대한 다중적인 이해와 그 결합이 필요하다. 사회적 가치는 국가와 시장의 역할과 더불어 요구되는 제3 섹터로서의 시민사회가 추구하는 자율, 참여, 연대와 협동 등과 같은 공동체적 가치를 의미한다. 공동체적 가치가 정 착되고 확산되기 위해서는 그 가치의 내용을 실천할 수 있는 시민사회의 공익을 위 한 자발적인 행동이 필요하다. 전쟁과 국가 탄생의 과정을 거치면서 정부와 시장과 더불어 시민사회가 주도했던 대표적인 자발적 행동으로 필란트로피를 분석하고 공 생주의적 관점에서 해석함으로써 이상세계 경제체제를 구성하는 하나의 방법론으로 제시하고자 한다. This study attempted to reveal the concept and content of philanthropy, as a methodology from a practical point of view for the Principle of Mutual Existence. Unification Thought presents the Principle of Mutual Existence as the economic ideology of an ideal world. In order for the ideal economic ideology to be realized in reality, it is necessary to understand and combine multiple understandings of economic and social values. Social value refers to community values such as autonomy, participation, solidarity and cooperation pursued by civil society as the third sector required along with the roles of the state and the market. In order for community values to be established and spread, voluntary actions for the public good of civil society that can practice the contents of those values are necessary. Through the process of war and the birth of a nation, philanthropy is analyzed as a representative voluntary action led by civil society along with the government and the market. Philanthropy is thus interpreted from the perspective of the Principle of Mutual Existence to be presentable as a methodology for constructing an ideal world economic system.

      • KCI등재

        상용 디지털 TV를 위한 임베디드 리눅스 시스템

        문상필,서대화,Moon, Sang-Pil,Seo, Dae-Wha 한국정보처리학회 2003 정보처리학회논문지 A Vol.10 No.6

        아날로그 TV에 비해 새로운 방식의 디지털 TV는 단순한 영상과 음성의 처리뿐만 아니라, 데이터를 처리 및 저장해야 한다. 그리고 필요에 따라 데이터를 요구하기 위한 리턴 채널을 관리해야 한다. 이처럼 많은 기능을 동시에 충족시켜줘야 하기 때문에 디지털 TV시스템에서는 운영체제가 필요하다. 임베디드 리눅스는 오픈 소스로서 가격 경쟁력을 확보할 수 있으며, 공개된 장치 드라이버와 응용프로그램을 재사용 가능하며, 오픈 소스 공동체를 통해 문제를 쉽게 해결할 수 있고, 쉘, 파일 시스템을 이용하여 편리한 개발 환경을 제공해 주는 이점이 있다. 본 논문에서는 디지털 TV 시스템을 위한 임베디드 리눅스를 이식하기 위해 교차 개발 환경과 커널을 빅 엔디언으로 변경하였고, 커널 구동에 필수적인 장치들을 재설계하였으며, 커널을 메모리에 적재할 수 있도록 시스템 메모리 맵을 재설정하였다. 또한 시스템 장치제어를 위한 디바이스 드라이버를 작성하였다. A Digital TV system is necessary for data Processing as well as video and audio processing. Especially in the case of interactive broadcasting, it should manage returning channel created by the Internet, PSTN, and so on. Because of many functionalities and multitasking jobs, it needs an Operating System. Embedded Linux as open source program can increase a cost effectiveness in market and has many advantages - reusable device drivers and application programs, more convenient developing environment using shell and file system, and easy problem resolution within Open Source Community. In this paper, we modified Embedded Linux kernel and cross developing environment for a big-endian system, redesigned devices for kernel execution, and configured system memory map in order to load a linux kernel. Also we developed an device driver for entire system control.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼