http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
펠렛밀과 수분함량이 이탈리안 라이그라스 펠렛의 물리적 특성 및 화학적 성상에 미치는 영향
문병헌,신종서,박형수,박병기,김종근,Moon, Byeong Heoun,Shin, Jong Seo,Park, Hyung Soo,Park, Byeong Ki,Kim, Jong Geun 한국초지조사료학회 2016 한국초지조사료학회지 Vol.36 No.4
The objective of this study was to determine the effect of the moisture content and pellet mill type on the physical and chemical characteristics of Italian ryegrass (IRG) pellet. Moisture content of raw material significantly (p<0.05) affected IRG pellet formation. Moisture content at 25% was the best condition for IRG pellet formation in terms of shape, power load and temperature changes. The hardness of pellet was decreased when moisture content was increase. However, the hardness of pellet was not affected by pellet mill type. Moisture content at 30% dramatically (p<0.05) decreased the durability compared to moisture content at 25%. Dry matter content of IRG pellet was increased (p<0.05) after pelleting. Total count of microorganism was decreased in pellet due to pressure heat and moisture losses during the pelleting process. These results indicated that the proper moisture content of Italian ryegrass pelleting would be at 25%. In addition, Roll & flat die type would be more suitable than Ring die and Die & flat die type in IRG pelleting. Pelleting works would be beneficial for improving forage quality and long storage. 본 연구는 IRG의 사료 가치 및 보관성 향상을 목적으로 소형 펠렛밀의 동력 구동방식 및 함수율이 IRG 펠렛의 성형 특성 및 품질에 미치는 영향을 규명하기 위해 실시되었다. IRG의 펠렛 형성은 재료의 함수율에 큰 영향을 받았다(p<0.05). 펠렛밀의 종류별로 약간의 차이는 있지만, 함수율 25% 조건이 외관, 부하량 및 온도 변화를 고려했을 때 IRG 펠렛 성형에 가장 적합한 것으로 나타났다. 펠렛의 경도는 펠렛밀의 종류에 관계없이 함수율이 높을수록 낮아지는 경향을 보였다. 15~25% 조건의 함수율이 내구도에 미치는 영향은 적었지만, 함수율 25% 조건에 비해 30% 조건에서는 내구도가 급격히 떨어지는 결과를 보였다 (p<0.05). 펠렛밀의 종류와 함수율에 관계없이 IRG 펠렛 성형전에 비해 성형 후에 건물 함량이 높아졌으며(p<0.05), 펠렛 성형과정에서 발생되는 압축열과 재료의 급격한 수분 손실로 인해 총 세균수는 크게 감소되는 결과를 보였다. 따라서 본 연구의 결과에서 IRG 펠렛 형성에 바람직한 함수율은 25%로 나타났으며, 원형 펠렛밀 보다는 수평형 펠렛밀 특히, roller 구동의 수평형 펠렛밀이 IRG 펠렛 형성에 유리한 것으로 판단된다. 또한 IRG에 대한 펠렛 성형은 IRG의 사료 가치 및 장기 보관성 향상에 긍정적인 방법인 것으로 사료된다.
수분 함량이 이탈리안 라이그라스 큐브의 물리적 및 화학적 성상에 미치는 영향
문병헌,박형수,신종서,박병기,김종근,Moon, Byeong Heoun,Park, Hyung Soo,Shin, Jong Seo,Park, Byeong Ki,Kim, Jong Geun 한국초지조사료학회 2016 한국초지조사료학회지 Vol.36 No.1
본 시험은 가공 조사료 이용확대를 위해 압축 방법과 수분 함량이 이탈리안 라이그라스 큐브의 물리적 및 화학적 성상에 미치는 영향을 구명하기 위하여 수행되었다. 이탈리안 라이그라스 큐브 제작을 위해 평판 다이형 큐브 기계를 직접 제작하였으며 이탈리안 라이그라스의 수분 함량을 15, 20, 25 및 35%로 조절하여 큐브를 제조하여 품질을 조사하였다. 수분 함량이 15~20%에서는 간헐적인 균열이 일어났으며 가루 발생량도 10~16%로 다른 처리보다 낮게 나타났다. 경도에 있어서도 15% 수분 함량에서 159 kg/f로 가장 높게 나타났으며 30% 수분 함량에서는 70 kg/f로 가장 낮았다. 그러나 전기 부하량과 큐브의 표면 온도는 수분 함량이 낮은 곳에서 더 높게 나타났다. 수분 함량에 따른 큐브의 일반 조성분은 조제전에 비하여 조단백질과 조지방 함량은 높아졌으며 조섬유, ADF, NDF 함량은 감소하는 것으로 나타났다. 조회분 함량은 수분 함량 30%를 제외하고는 큐브 조제 전후간에 차이를 보이지는 않았다. 수분 함량에 있어서는 수분이 많아질수록 조단백질 함량이 증가되는 경향을 보였으며 조섬유, 조회분 함량은 처리간에 차이가 나타나지 않았다. NDF 및 ADF 함량은 30% 수분 함량에서 가장 낮게 나타났다. 이상의 결과를 종합하여 볼 때 이탈리안 라이그라스 큐브 조제를 위한 적정 수분함량은 15~20% 내외로 추정되며 이로 인해 사료적 가치가 향상되는 것으로 나타났다. The objective of this study was to determine the effect of moisture content on the physical and chemical characteristics of Italian ryegrass cube. Cube quality according to moisture contents (15, 20, 25, and 30%) was determined. Cubes made with 15 to 20% moisture showed a little cracks. But, the amount of powder generate from these cubes were lower by 10 to 16% compared to other cubes made with 25 to 30% moisture contents. The highest hardness at 159 kg/f was obtained when the cube was made with 15% moisture content and the lowest was 70 kg/f when the cube was made with 30% moisture content. The electrical loading and surface temperature were increased when moisture content was decreased. The chemical compositions of cube were differ from those of raw materials. Crude protein (CP) and ether extract (EE) contents were increased after cubing works. However, crude fiber (CF), acid detergent fiber (ADF), and neutral detergent fiber (NDF) contents were decreased after cubing. The crude ash content was not significantly (p > 0.05) different between raw material and cube. Higher moisture content resulted in higher crude protein content. However, crude fiber and crude ash content were not significantly (p > 0.05) different between each other. The contents of ADF and NDF were the lowest in cubes made with 30% moisture content. Our results suggest that the proper moisture content of Italian ryegrass cubing is recommended to be 15 to 20% and that cubing works should help increase forage quality.
측두하악장애 임상연구에 사용된 진단 및 평가기준에 대한 문헌적 고찰
문병헌 ( Byung-heon Moon ),최영준 ( Young-jun Choi ),유수빈 ( Su-bin Yoo ),주영국 ( Yeung-guk Ju ),송승배 ( Seong-bae Song ),송광찬 ( Gwang-chan Song ),서지연 ( Ji-yeon Seo ),최희승 ( Hee-seung Choi ) 대한한의학회 한방재활의학과학회 2016 한방재활의학과학회지 Vol.26 No.4
Objectives The aim of this review is to provide fundamental data for temporomandibular disorders diagnosis and evaluation criteria which can be used in clinical trial. Methods We investigated the clinical studies on temporomandibular disorders via PubMed. Also, we searched domestic articles through “OASIS”, “NDSL”, “KISS”, “Korean Traditional Knowledge Portal (KTKP)”. The articles we focused on were the recent decade from 2007 to 2016. A total of 139 studies were analyzed: 42 domestic articles and 97 overseas articles. This study focuses on the diagnosis and evaluation criteria on temporomandibular disorders. Results 1) In diagnosis criteria, Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) was used 14 times in domestic articles and 63 times in overseas articles. Clinical symptoms were used 13 times in domestic articles, 17 times in overseas articles. 2) In evaluation criteria, Visual Analog Scale (VAS) was used as a pain scale 12 times in domestic articles, 63 times in overseas articles. Pressure Pain Threshold (PPT) was used 16 times in overseas articles. Whereas, no clinical trials used PPT in domestic articles. In psychological scale, Symptom Checklist-90-Revised (SCL-90-R) was used 6 times. However, SCL-90-R was used 2 times in domestic articles. ROM(Maximum Mouth Opening (MMO), Maximum Comfortable Opening (MCO) were used 24 times in overseas. In domestic articles, MMO was counted 12 times, while MCO was counted 5 times. Conclusions This research reviewed the tendency of using diagnosis methods and evaluating outcomes of the clinical on TMD. It is expected that this investigation would develop further treatment for TMD in the Korean Medicine. (J Korean Med Rehabil 2016;26(4): 45-55)
자동차 냉각 성능 향상으로 인한 배기 및 연비 저감에 대한 연구
문병헌(Byungheun Moon),이기형(Kihyung Lee),김기범(Kibum Kim),최경욱(Kyungwook Choi) 한국자동차공학회 2011 한국자동차공학회 부문종합 학술대회 Vol.2011 No.5
The automotive cooling inventory is normally designed such that it can endure the excessive heat load situations that occur sporadically. Considering most normal driving modes, the cooling systems are unnecessarily large, which increases harmful emissions and fuel consumption of vehicles. An experimental study was carried out to evaluate a novel automotive cooling strategy using the latent heat of a phase change material (PCM) that made it possible to downsize the automotive engine cooling system. The heat load averaging capability of the PCM led to around 35% decrease in cooling system, and the engine warm-up time reduced around 60% as a result of downsizing the cooling system. In addition, severe coolant temperature shaking was successfully averaged out in the downsized cooling system with a heat accumulator containing PCM. This innovative cooling concept will definitely contribute to a considerable improvement in terms of fuel economy and emissions characteristics of vehicles by achieving stable combustion condition of engines as well as reducing total body weight. The more detailed discussion will be presented in the manuscript.