http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고에너지볼밀법을 이용한 PMN-PZT 세라믹스의 제조와 압전특성
명성재,구본급,Myoung, Seong-Jae,Koo, Bon-Keup 한국세라믹학회 2005 한국세라믹학회지 Vol.42 No.10
Pb(Zr,Ti)$O_{3}$Pb($Mn_{1/3}$$Nb_{2/3}$)$O_{3}$ powder was successfully synthesised by high-energy milling method, and the behavior of lowtemperature sintering and piezoelectrical properties of Pb(Zr,Ti)$O_{3}$-Pb($Mn_{1/3}$$Nb_{2/3}$)$O_{3}$ ceramics were investigated as a function of mechanical alloying time. In order to confirm whether the Perovskite phase in this composition was formed by mechanical activation technique or not, we performed X-Ray Diffraction pattern analysis (XRD). The microstructure for the sintered samples were characterized using a Scanning Electronic Microscope (SEM). And the piezoelectrical properties ($k_{p}$ and $Q_{m}$) of the sintered samples was measured using HP 4194A impedance analyzer.
부인과 수술 후 오심 및 구토의 발생에 미치는 Propofol 마취 및 Ondansetron 의 예방효과
김지희,명성재,이규탁,임영진,이상철,도상환 대한정맥마취학회 1999 정맥마취 Vol.3 No.2
서론: 술후의 오심과 구토(postoperative nausea and vomiting; PONV)는 흔한 부작용으로서 특히 아편양제제를 사용하는 자가정주 통증치료법(intravenous patient-controlled analgesia; IV-PCA)을 시행할 때 주된 합병증의 하나이다. 이를 줄이기 위한 여러 가지 시도 중 진토제로 ondansetron을 수술전 투여하는 방법과 propofol을 사용한 정맥마취를 시행하여 PONV의 발생빈도에 미치는 영향을 알아보고자 하였다. 방법: 전신마취로 자궁근종절제술 등의 부인과 수술을 받은 160명의환자들을 무작위로 네군으로 나누었다. 자마취제로 propofol을 사용한 군과 enflorane을 사용한 군으로 나누고 각각을 수술 전 ondansetron 8 ㎎을 투여한 군과 placebo로 saline 3 ㎖를 토여한 군으로 이중맹검법으로 다시 분류하였다. 수술 후에는 ketorolac과 nalbuphine을 사용하여 IV-PCA를 시행하였다. 수술후 24시간 후에 오심, 구토, 트림의 발생여부를 측정하여 각 군간에 발생률의 차이를 비교하였다. 결과: 각 군별로 PONV의 발생률은 enflurane-saline (ES)군에서는 35명(88%), enflurane-ondansetron (EO)군과 propofol-saline (PS)군에서는 30명(75%), propofol-ondansetron (PO)군에서는 24명(64%)으로 관찰되어 PO군에서 ES군에 비해 유의하게 낮았다(p<0.05). 오심과 트림은 각군별로 별 차이를 보이지 않았으며, 구토는 ondansetron을 사용한 EO군과 PO군에서 대조군인 ES군에 비해 유의하게 감소된 발생률을 보였다(8% vs 28%). 결론: 전신마취 유도시에 예방적으로 ondansetron 8 ㎎을 투여하고 propofol로 정맥마취를 시행한 결과 propofol 정맥마취하에 ondansetron을 사용한 경우 enflurane 마취하에 placebo를 사용한 경우에 비해 PONV의 발생률이 유의하게 낮았다. Background: Postoperative nausea and vomiting (PONV) are one of the most common postoperative complications. We compared the effects of ondansetron with or without propofol in regard to the prevention of PONV. Methods: One hundered and sixty healthy women undergoing gynecologic surgery were allocated randomly to receive either enflurane inhalation anesthesia or propofol intravenous anesthesia. In each group, either ondansetron 8 mg or placebo (saline 3 ml) was administered intravenously with a double-blind fashion before anesthesic induction. Postoperative patient-controlled analgesia was applied with ketorolac and nalbuphine. The incidence of PONV was measured at 24hr postoperatively and statistical significance was assessed among 4 groups (n=40 each). Results: The incidence of PONV showed 88% in enflurane-saline (ES) group, 75% in enflurane-ondansetron (EO) group and propofol-saline (PS) group, and 60% in propofol-ondansetron (PO) group. PO group showed significant decrease in PONV than ES group (P<0.05). There were no significant difference in nauesa and retching among groups. Vomiting occured less commonly in EO and PO group than in ES group. Conclusions: Combination of ondansetron 8 ㎎ and propofol anesthesia decreased PONV after gynecologic surgery.
분쇄 방법 및 하소온도에 따른 Doner-doped BaTiO<sub>3</sub>의 전기적 특성
이정철,명성재,전명표,조정호,김병익,신동욱,Lee, Jeong-Cheol,Myong, Seong-Jae,Chun, Myoung-Pyo,Cho, Jeong-Ho,Kim, Byung-Ik,Shin, Dong-Wook 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.3
In this study, We have been investigated the effect of calcination temperature and high-energy ball-milling of powder influences the $BaTiO_3$-based PTCR(Positive Temperature coefficient Resistance) characteristics and microstructure. The mixed powder was obtained from $BaCO_3$, $TiO_2$, $CeO_2$ ball-milled in attrition mill. The mixed powder was calcine from 1000 $^{\circ}C$ to 1200 $^{\circ}C$ in air and then it was sintered in reduction- re-oxidation atmosphere. As a result, The room-temperature electrical resistivity decreased and increased with increasing calcination temperature. specially, Attrition milled powder could have low room-temperature resistivity and high PTC jump order at 1100 $^{\circ}C$. attrition milling had lower room-temperature resistivity than ball milling. Particle size decreased by Attrition milling of powder influences in calcination temperature and room-temperature resistivity.
Ni-Cr 박막 저항의 특성에 미치는 열처리 조건의 영향
류승목,명성재,구본급,강병돈,류제천,김동진 한국마이크로전자및패키징학회 2004 마이크로전자 및 패키징학회지 Vol.11 No.1
최근에 3 ㎓이상의 고주파용 전자부품과 소자의 제조에 낮은 저항온도계수(TCR)값과 높은 정밀도를 갖는 박막저항이 사용되고 있다. Ni-Cr 박막저항은 낮은 TCR 값과 저항에 대한 높은 안정성 때문에 저항 물질로 사용되는 가장 일반적인 물질이다. 본 연구에서는 $Ni_{72}Cr_Al_3Mn_4Si$(wt%)이 첨가된 우수한 저항특성을 갖는 S-type의 Evanohm 합금 타겟과 스퍼터링 장비를 이용하여 박막 저항을 제조하였다. 또한 열처리 조건을 $200^{\circ}C$, 300$300^{\circ}C$, $400^{\circ}C$, $500^{\circ}C$로 변화시키면서 고주파 박막 저항의 미세구조와 전기적 특성을 관찰하여 최상의 열처리 조건을 알아보았다. In the electronic components and devices fabrication, thin film resistors with low TCR (temperature coefficient of resistance) and high precision have been used over 3 ㎓ microwave in recent years. Ni-Cr alloys thin films resistors is one of the most commonly used resistive materials because they have low TCR and highly stable resistance. In this work, we fabricated thin film resistors using Evanohm alloys target(72Ni-20Cr-3Al-4Mn-Si) of S-type with excellent resistors properties by RF-sputtering. Also we reported the best annealing condition of thin film resistors for microwave to observe microstructure and electronic properties of thin film according to annealing conditions($200^{\circ}C$, $300^{\circ}C$, $400^{\circ}C$, $500^{\circ}C$)