http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
디지털 헬스케어 제품 활성화를 위한 인쇄전자 기술의 탐색 : 가상현실(VR)기기를 중심으로
박혁진,류형준,문길환,방태원 한국인쇄학회 2022 한국인쇄학회지 Vol.37 No.1
전 세계적으로 유행한 코로나 바이러스로 인해 포스트 코로나 시대에는 비대면에 관 한 부분이 빠르게 발전될 것으로 보여지며 실버산업의 헬스케어 분야에는 디지털 기술 의 적용이 매우 중요한 요소가 될 것이다. 이러한 흐름에 맞게 한국 실버산업에 디지털 헬스케어 IT 제품군, 특히 가상현실(VR) 기술이 도입되었을 때 실버산업 종사자와 실 버산업 소비자가 가지는 인식에 대해 알아보고자 하였다. 또한 디지털 헬스케어의 혁신 을 통해 한계비용을 낮추고 기술과 서비스의 품질을 높여서 경제성을 확보할 수 있는 인쇄전자의 기술이 적용 되었을 때 치료 효과를 예측하고자 하였다. 이를 분석하기 위해 세 가지의 연구 문제를 설정하였다. 첫째, 가상현실(VR) 기술을 활용한 디지털 헬스케어에 대해서 어떻게 생각하는가? 둘째, 가상현실(VR) 기술을 활 용한 디지털 헬스케어에 대해서 국내 실버산업 종사자의 수용 태도는 어떠한가? 셋째, 가상현실(VR) 기술에 인쇄전자를 적용한 디지털 헬스케어 활동이 실버산업 종사자와 실버산업 소비자에게 어떤 영향을 미칠 수 있는가? 이에 답하기 위해 실버산업 종사자 와 실버산업 소비자를 대상으로 심층 인터뷰를 진행하였다. 분석 결과, 가상현실(VR) 기술을 도입한 디지털 헬스케어에 대한 의견은 긍정적인 결과로 나타났다. 하지만 디지털 헬스케어의 비용에 대한 인식은 아직 한국의 실버산업 에 있어서 디지털 헬스케어가 자리 잡는 데는 상당한 시간이 걸릴 것으로 보여진다. 따 라서 디지털 헬스케어의 성공적인 안착을 위해서는 인쇄전자를 통해 경제성을 확보하 는 것이 무엇보다 필요하다는 것을 알 수 있었다. 또한 앞으로 디지털 기술의 발전과 시장수요의 변화에 맞춰 헬스케어의 효율성을 높이고 새로운 부가가치를 창출하기 위 한 인쇄 전자와의 융합이 필요할 것으로 생각된다. Due to the COVID-19, which has been prevalent around the world, non-face-to-face areas are expected to develop rapidly in the post-COVID-19 era, and the application of digital technology will be a very important factor in the healthcare field of the silver industry. In line with this trend, we tried to find out the perception of digital healthcare IT products, especially virtual reality(VR) technology, of the silver industry workers and consumers in the silver industry. In addition, it was intended to predict the therapeutic effect when printing electronics' technology, which can secure economic feasibility by lowering marginal costs and improving the quality of technologies and services through digital healthcare innovation, was applied. Three research questions were set up to analyze this. First, what do you think of digital healthcare using virtual reality(VR) technology? Second, what is the acceptance attitude of domestic silver industry workers to digital healthcare using virtual reality(VR) technology? Third, how can digital healthcare activities applying printing electronics to virtual reality(VR) technology affect workers in the silver industry and consumers in the silver industry? In order to answer this, in-depth interviews were conducted with workers in the silver industry and consumers in the silver industry. As a result of the analysis, opinions on digital healthcare that introduced virtual reality(VR) technology showed positive results. However, recognition of the cost of digital healthcare is still expected to take a considerable amount of time for digital healthcare to take root in Korea's silver industry. Therefore, it was found that securing economic feasibility through printing electronics is more important than anything else for the successful settlement of digital healthcare. In addition, it is believed that convergence with printing electronics will be needed to increase healthcare efficiency and create new added value in line with the development of digital technology and changes in market demand in the future.
권정완,김종원,류형준,이재기,하위호 한국물리학회 2006 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.48 No.4
As part of preparation for therapeutic proton beam monitoring, we have developed a 2D positionsensitive dosimetry system and a multi-layer Faraday cup (MLFC). The 2D dosimetry system consists of a scintillator screen and a CCD camera to capture light emitted from the proton beam bombardment with a spatial resolution better than 1 mm. The MLFC is used to swiftly measure the proton range and the depth dose distributions. To investigate the performance of the CCD and MLFC systems, we used the 20- to 38-MeV proton beams at the Korea Institute of Radiological & Medical Science (KIRAMS) to measure the 2D dose distributions, the depth dose distributions with a phantom, and the proton ranges. In addition, Monte-Carlo simulations were performed to compare with the experimental results. Both systems showed reliable performance for use as convenient tools for proton beam quality monitoring.\JK
4차 산업 혁명 시대 인쇄 산업 육성을 위한 교육과정 개편 필요성
문길환,방태원,정명식,한형열,박혁진,류형준 한국인쇄학회 2021 한국인쇄학회지 Vol.36 No.1
한국은 인쇄문화의 종주국이다. 유네스코 기록유산인 현존하는 세계 최고의 금속활자 본인 ‘직지심체요절’과 ‘고려대장경판’(팔만대장경) 등으로 대표되는 오래된 인쇄문화를 가지고 있기 때문이다. 역사가 증명하듯이 인쇄 산업은 보통의 일반적인 개별 산업과 달리 한 나라의 정치와 경제, 사회, 문화 등 전체적인 분야에 걸쳐 광범위하게 영향을 미쳤다. 이러한 가치는 오늘날에 이르러서도 마찬가지다. 새로운 산업 생태계를 만드는 데 인쇄 산업은 큰 역할을 할 수 있으며, 시대의 변화에 따라 4세대인 디지털인쇄 시대 를 넘어 5세대인 인쇄전자 분야로 응용 분야가 확대되어지고 있다. 그럼에도 불구하고 신문, 잡지, 서적 등의 출판물을 제작하는 것이 인쇄라는 편견 때문에 인쇄 산업의 무 궁무진한 가치가 제대로 알려지지 못하고, 인쇄 기술 발전에 발목이 잡혀 있는 것이 현 실이다. 본 연구의 주요 목적은 시대의 변화와 발전 과정 속에서 기존 인쇄 산업의 변화를 살펴본 후, 4차 산업 혁명 시대라는 새로운 패러다임에 인쇄 기술이 영향을 미치는 분 야와 응용 가능 분야를 알아보고 인쇄 기술의 잠재적인 고부가가치를 발굴하여 인쇄전 자 분야의 주요 산업으로 이어질 수 있도록 육성하기 위한 인식 전환의 필요성과 중요 성을 제안하고자 하였다. Korea is called the cradle of printing culture. This is because it has a long-lasting printing culture represented by the world’s best metal movable type, ‘Baegun Hwasang Chorok Buljo Jisimche Yojeol’(Jikjisimcheyojeol) and ‘The Tripitaka Koreana’(The Tripitaka Koreana). As history proves, the printing industry, unlike any other individual industry, has had a wide impact on the politics, economy, society, and culture of a country as a whole. These values are still the same today. The printing industry can play a big role in creating a new industrial ecosystem, and the field of application is expanding beyond the 4th generation digital printing era to the 5th generation printed electronics field. Nevertheless, the inexhaustible value of the printing industry is not known properly because of the prejudice that printing is the production of publications such as newspapers, magazines, and books, and the reality is that the development of printing technology is hindered. The main purpose of this study is to examine the changes of the existing printing industry in the process of change and development of the times, to examine the fields and applicable fields that print technology affects the new paradigm of the 4th Industrial Revolution era, and to suggest the necessity and importance of the recognition transition to foster the potential high value-added of printing technology to lead to major industries in the printing and electronics sector.