http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
류득배,이수완,Ryu, Deuk-Bae,Lee, Su-Wan 한국재료학회 2001 한국재료학회지 Vol.11 No.1
유리기판 위에 열화학증착법으로 투명전도성 산화주석막을 제조하였다. 박막은 원료물질로 tetramethyltin(TMT), 산화제로 산소나 오존이 포함된 산소의 혼합물로부터 제조되었다 제조된 박막은 기판온도에 따라 물성이 크게 변하였고 최적화된 박막은 TMT 유랑 8 sccm, 산소유량 150 sccm, 기판온도 $380^{\circ}C$에서 제조되었다. 오존을 사용함으로서 기판온도를 약 $180^{\circ}C$정도 낮출 수 있었고 비저항은 ~$10^{ -2}{\Omega}cm$에서 ~$10^{-3}{\Omega}cm$으로 감소시킬 수 있었다. Transparent and conducting tin oxide thin films were prepared on soda lime silicate glass by thermal chemical vapour deposition. Thin films were fabricated from mixtures of tetramethyltin (TMT) as a precursor, oxygen or oxygen containing ozone as an oxidant. The properties of fabricated tin oxide films are highly changed with variations of substrate temperature. Optimized thin films could be prepared on TMT, which flow rate of 8 sccm, oxygen flow rate of 150 sccm and substrate temperature of 38$0^{\circ}C$. We reduced deposition temperature about$ 180^{\circ}C$ by using of oxygen containing ozone instead of pure oxygen and resistivity of thin films was decreased from ~ ${\times}10^{-2}{\Omega}cm$ to ~${\times}10^{-3}{\Omega}cm$.
생체 세라믹스용 마모시험장비의 제작 및 정방정지르코니아의 마모특성
김성호,류득배,문병규,이수완 선문대학교 중소기업기술지원연구소 2001 선문공대 연구/기술 논문집 Vol.6 No.1
생체 세라믹스용 마모시험장비를 제작하였다. 마모시험기는 lever system을 이용하여 하중인가가 되게 설계되었으며 step motor를 사용하여 회전수 조절이 용이하게 하였다. DAQ (Data Acquisition System)을 이용하여 하중을 측정하여 마찰계수를 측정할 수 있게 하였다. 성능평가를 위해 정방정지르코니아를 Ringer's solution에서 선속도 40 mm/s, 인가하중 10, 20, 30 N에서 마모시험 하였다. Grooving, crack networking등의 마모기구가 관찰되었다. A wear testing machine for bioceramics was designed and made, which loading and rotating parts consisted of a lower systemed and a step motor, respectively. Friction coefficient was determined by DAQ(Data Acquisition System). Wear resistance of tetragonal zirconia was measured under linear velocity of 40 mm/sec, applied load of 10, 20, 30 N in Ringer's solution, which showed grooving, crack networking on worn surfaces.