http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박태원,도영수,김광우,Park, Tae-W.,Doh, Young-S.,Kim, Kwang-W. 한국도로학회 2008 한국도로학회논문집 Vol.10 No.2
본 연구에서는 아스팔트 혼합물의 변형강도시험에서 하중봉의 치수가 변형강도 특성에 미치는 영향을 평가하였다. 이를 위하여 직경(D) 40mm, 하단의 원형 절삭 반경(r)을 10.0mm와 10.5mm로 제작한 두 개의 하중봉으로 아스팔트 혼합물의 변형강도를 측정하고, 반복주행시험을 수행하여 얻어진 소성변형 특성치와 상관성 분석을 하였다. 또한 하중봉의 원형 절삭반경에 따른 골재치수에 어떠한 영향을 미치는지를 확인하기 위하여 통계 분석을 하였다. 변형강도 값과 변동계수는 r=10mm하중봉을 사용한 것이 더 낮은 것으로 나타났다. 또한 r=10mm 하중봉이 변형강도와 소성변형 특성치와 상관성 분석에서도 더 높은 상관성을 보였다. 골재치수와 원형 절삭반경은 변형강도에 영향을 미치는 것으로 나타났으나 두 변수의 교호작용에서는 골재의 크기가 $10mm{\sim}19mm$내에서는 r에 영향을 받지 않는 것으로 나타났다. 따라서 소성변형과의 상관성이 더 우수하며 변동계수도 낮은 것으로 나타난 D=40mm, r=10.0mm의 하중봉을 사용하는 것이 적합할 것으로 판단되었다. This study evaluated influence of the loading head dimension on characteristics of deformation strength ($S_D$) of asphalt mixtures. Kim test and Wheel tracking (WT) test were conducted to evaluate $S_D$ characteristics with relation to WT results for various mixtures. The $S_D$ values and coefficient of variation of $S_D$ values of r=10mm were smaller than those of r=10.5mm. It was also found that $S_D$ values obtained using r=10mm loading head showed high correlations with rut parameters of WT test. It was indicated that the aggregate size and radius (r) of round cut were statistically significant variables on $S_D$ at = 0.05 level in the analysis of variance. However, in interaction of r and aggregate size showed no significance within $10{\sim}19mm$ aggregate size at the same level. Therefore, it was concluded that the diameter (D) of 40mm and the bottom edge radius (r) of 10mm was suitable dimension of loading head for deformation strength test.
김광우 ( Kim Kwang W ),도영수 ( Young S Doh ),이상범 ( Xiang Fan Li ) 한국농공학회 2001 韓國農工學會誌 : 전원과 자원 Vol.43 No.2
This study deals with coal-mine waste (CMW) for use in concrete as a replacement of normal aggregates. The CMW was collected from Sabuk region. Ganwon-do. Fine and coarse aggregates from CMW were prepared by using a crusher and separating debris with #4 sieve. CMW aggregates showed good physical and mechanical properties with having specific gravity over 2.65, absorption less than 1%, and abrasion ratio below 20%. However, particle shape of CMW was poor because of non-isotropic nature of matrix which cause particles to be long or flat. Since irregular particles caused a poor workability, to make workability better, a 1/4 of coarse aggregate was replaced with normal aggregate together with a superplasticizer. Compressive strength and other mechanical properties of CMW concrete were very good. Color of the concrete was darker than normal concrete due to black color of CMW. In conclusion, characteristics of CMW concrete was acceptable for use as a structural concrete material.
김광우,안경애,정일권,도영수 강원대학교 부설 석재복합신소재 제품연구센터 1999 석재연 논문집 Vol.4 No.-
본 연구에서는 국내산 LDPE와 SBS 폴리머를 아스팔트 함량의 3%, 4%, 5%를 사용하여 개질한 아스팔트를 노화장치에 의해 노화시킨 후 침입도, 절대점도, 동점도, GPC와 같은 실험을 통해 개질 아스팔트의 노화 특성을 분석하고자 했다. 일반적으로 개질되지 않은 아스팔트는 노화됨에 따라 침입도 수치가 줄어드는 경향이 확실하게 나타나지만 개질 아스팔트는 종류에 따라 약간의 차이가 있음을 알 수 있었다. 뿐만 아니라 절대 점도의 경우도 노화됨에 따라 그 수치가 증가하는 것이 일반적인데, 개질된 아스팔트의 점도수치가 너무 커서 실험 한계치를 넘어가기 때문에 개질 아스팔트의 점도 평가방법으로는 부적절한 것으로 나타났다. 반면에 동점도 시험은 아스팔트의 노화정도에 따라 그 수치가 적절해서 개질 아스팔트의 노화 특성을 분석하기에 적당하다고 판단된다. Oxidation of asphalt binder increases quantities of high-molecular weight in asphalt and is a major reason for hardening of binder. Oxidation occurs during hot mixing with aggregates before placement on road and then after the asphalt pavement is constructed. The rolling thin film oven (RTFO) and pressure aging vessel(PAV) were used as artificial aging for simulation of hot mixing and long term in-service aging, respectively. Polymer modified asphalt(PMA) were manufactured using 3%, 4%, 5% of LDPE and SBS in laboratory. Physical properties and gel permeation chromatography(GPC) of PMA were measured to evaluate aging characteristics of PMA binder. PMA binders showed increased hardening and this was evidenced from increased viscosities, increased large molecular size in GPC and reduced penetration. The asphalt from different refineries which have the same penetration value didn't show the same profile of GPC.