http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
남수용 한국인쇄학회 1996 한국인쇄학회지 Vol.14 No.2
In general, printing inks are mainly composed of pigments and vehicles. Its characteristics are affected, to a greater or lesser extent, by the size and distribution of the pigment particles in the dispersion. Color strength, transparency and gloss generally increases with an decrease in particle size of pigments. On the contrary, opacity, lightfastness tend to increases with an increase in particle size of pigments In this work, we have investigated an effect of surface area of pigments on the physical properties of printing of printing ink which made up vehicles for sheet fed and organic pigment Lake Red C(C.I.Pigment Red 53:1) that different surface area and particle size. It was found that gloss, tack and yield value increases with an increase in surface are of pigments, but grindness is reduced.
실버 파우더 형상에 따른 감광성 실버페이스트의 물성 연구
남수용 한국화상학회 2015 한국화상학회지 Vol.21 No.2
본 연구에서는 크기와 형상이 서로 다른 4가지 실버 파우더를 이용하여 감광성 실버 페이스트를 제조 하였다. 제조된 실버 페이스트의 레올로지 특성 및 터치패널용 전도성 미세패턴 구현을 검토하였다. 그리고 건조방식에 따른 전도성도 평가하였다. 그 결과 실버 파우더의 평균입자 크기는 D50=0.8∼1.0㎛이 가장 낮은 저항치를 얻을 수 있었고, 또한 패턴의 Sharpness도 가장 우수함을 알 수 있었다. 건조방식은 예비건조 및 후 건조를 IR/IR방식으로 진행한 것이 가장 낮은 저항치를 얻을수있었다. In this research, four different silver powders with specific sizes and shapes were used in order to produce photosensitive silver paste. The produced silver paste was checked in order to see whether its rheological properties and its micro-conductive pattern specific to the touch panel were well embodied. Moreover, the conductance of the paste, with reference to its drying system, was evaluated. As a result, the lowest resistance was achieved when the particle mean diameter was D50=0.8∼1.0㎛, which also produced the highest pattern sharpness. The drying system where IR/IR method was used for both pre-drying and post-drying processes resulted in the lowest resistance.
남수용,임찬규,남현민,권보석 한국화상학회 2016 한국화상학회지 Vol.22 No.2
본 연구에서는 Tg가 서로 다른 폴리에스테르 바인더로 실버 페이스트를 제조하여 점도 및 점탄성를 측정하였다. 그리고 제조된 실버 페이스트를 스크린인쇄법으로 전극을 인쇄하여 folding 및 stretching test에 따른 전도성 변화 및 전극패턴의 표면형상 변화에 대해서 연구하였다. 그 결과 folding test에서는 Tg가 낮고, 높고와는 관계없이 folding횟수의 증가에 따라서 저항치가 선형적으로 증가됨을 알 수 있었다. 그러나 stretching test결과에서는 Tg에 따른 명확한 특성차이가 나타났다. 즉 신율(elongation)이 증가함에 따라서 높은 Tg을 가진 바인더로 제조된 실버 페이스트의 경우에는 40%이상에는 저항치 측정이 불가능했지만 낮은 Tg로 제조된 것은 80%까지 저항치가 측정되었다. 결론적으로 80%라는 높은 신율을 요구하는 분야에는 낮은 Tg을 가진 바인더를 사용하는 것이 바람직함을 알 수 있었다. For this research, we produced the silver paste using polyester binders with different Tg and measured the viscosity and viscoelasticity. Then we printed the electrodes on the prepared silver paste using the screen printing method, to study the conductivity change and the electrode pattern’s surface morphology change after the folding and stretching test. The folding test result showed resistance increased linearly with respect to the increase in folding numbers regardless of the Tg value. However, in the stretching test, there was a clear difference in properties with respect to Tg. In other words, as the elongation increased measuring resistance in prepared silver paste with the binder has high Tg was impossible when it went over 40%, but in silver paste produced with the low Tg resistance could be measured up to 80%. In conclusion, in instances where high elongation is needed, it is desired to use the binder with low Tg.