http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
스트럿-타이 기법에 의한 초고강도 콘크리트 비정형 트러스 구조 디자인
김호연,조창근,양혜주,김민지,채윤하,최종성,Kim, Hoyeon,Cho, Chang-Geun,Yang, Hea-Joo,Kim, Min-Ji,Chea, Youn-Ha,Choi, Jong-Sung 한국공간구조학회 2018 한국공간구조학회지 Vol.18 No.2
In current research, it was attempted a preliminary design and evaluation of non-uniform ultra high-strength concrete (UHSC) truss members. UHSC used here has the compressive strength of 180 MPa, the tensile strength of 8 to 20 MPa, and the tensile strain after cracks up to 2%. By the three-dimensional finite element stress analysis as well as strut-tie approach on concrete solid beams, the non-uniform truss shape of UHSC truss was designed with the architectural esthetic concept. In a series of examples, to compare with conventional concrete members, the proposed UHSC truss members have advantages in capabilities of the slender design with minimum weight with high performances under transverse loadings as well as the aesthetically non-uniform design for spatial structures.
비정형 프리캐스트 초고강도 콘크리트 보의 설계 및 실험 평가
김호연,조창근,강주원,Kim, Hoyeon,Cho, Chang-Geun,Kang, Joo-Won 한국공간구조학회 2018 한국공간구조학회지 Vol.18 No.2
This paper presents the design, analysis, and experimental evaluations of precast reinforced UHPC (ultra high-performance concrete) beams with a new design concept of non-uniform flexural members. With outstanding mechanical properties of UHPC which can develop the compressive strength up to 200MPa, the tensile strengths up to 8~20MPa and the tensile strain up to 1~5%, a non-uniform structural shape of UHPC flexural beams were optimally designed using three-dimensional finite element analysis. The experiments were carried out and compared with the design strength in order to verify the performance of them. Proposed non-uniform UHPC beams were evaluated by a series of three-point beam loading test as well as estimated by design bending and shear strength of members. The newly designed UHPC beams show excellent performances not only in transverse load capacities but also in deformation capacities.
김호연,임길택,김두식,남윤석,Kim, Ho-Yon,Lim, Kil-Taek,Kim, Doo-Sik,Nam, Yun-Seok 한국정보처리학회 2003 정보처리학회논문지B Vol.10 No.4
본 논문에서는 우편물 자동처리론 위한 우편영상 인식 시스템을 소개한다. 우편영상 인식 시스템은 서장 우편물을 집배원이 배달하는 순서에 따라 자동으로 구분할 수 있도록 우편영상을 입력으로 받아 수신인 주소를 출력하는 인식 시스템을 말한다. 이 시스템은 수신인 주소영역 추출, 문자열 분리, 문자분할, 문자인식, 그리고 주소해석 모듈로 구성되어 있다. 주소영역 추출을 위해서는 우편물 주소 기입 위치에 대한 경험적 지식을 이용하였으며, 문자열 분리와 문자분한을 위해서는 연결요소 분석과 수직런 분석을 이용하였다. 문자인식에는 신경망 기반 인식기를 이용하였으며, 주소해석을 위해서는 동적 프로그래밍 기법을 적용하였다. 각 모듈은 독립적으로 구현되었기 때문에 인식 시스템의 성능 개선을 위한 모듈별 최적화가 용이하다는 장점이 있다. 실험에는 대전 유성우체국의 우편물 구분기를 이용하여 실제 우편물에서 수집한 인쇄 우편영상과 필기 우편영상을 이용하였으며, 비교적 우수한 인식 결과를 얻었다. In this paper, we describe an address image recognition system for automatic processing of standard- size letter mail. The inputs to the system are gray-level mail piece images and the outputs are delivery point codes with which a delivery sequence of carrier can be generated. The system includes five main modules; destination address block location, text line separation, character segmentation, character recognition and finally address interpretation. The destination address block is extracted on the basis of experimental knowledge and the line separation and character segmentation is done through the analysis of connected components and vortical runs. For recognizing characters, we developed MLP-based recognizers and dynamical programming technique for interpretation. Since each module has been implemented in an independent way, the system has a benefit that the optimization of each module is relatively easy. We have done the experiment with live mail piece images directly sampled from mail sorting machine in Yuseong post office. The experimental results prove the feasibility of our system.
서버 클러스터 환경에서 에너지 절약을 위한 동적 서버 전원 모드 제어
김호연,함치환,곽후근,권희웅,김영종,정규식,Kim, Ho-Yeon,Ham, Chi-Hwan,Kwak, Hu-Keun,Kwon, Hui-Ung,Kim, Young-Jong,Chung, Kyu-Sik 한국정보처리학회 2012 정보처리학회논문지 C : 정보통신,정보보안 Vol.19 No.2
All the servers in a traditional server cluster environment are kept On. If the request load reaches to the maximum, we exploit its maximum possible performance, otherwise, we exploit only some portion of maximum possible performance so that the efficiency of server power consumption becomes low. We can improve the efficiency of power consumption by controlling power mode of servers according to load situation, that is, by making On only minimum number of servers needed to handle current load while making Off the remaining servers. In the existing power mode control method, they used a static policy to decide server power mode at a fixed time interval so that it cannot adapt well to the dynamically changing load situation. In order to improve the existing method, we propose a dynamic server power control algorithm. In the proposed method, we keep the history of server power consumption and, based on it, predict whether power consumption increases in the near future. Based on this prediction, we dynamically change the time interval to decide server power mode. We performed experiments with a cluster of 30 PCs. Experimental results show that our proposed method keeps the same performance while reducing 29% of power consumption compared to the existing method. In addition, our proposed method allows to increase the average CPU utilization by 66%. 기존의 서버 클러스터 환경에서는 모든 서버가 항상 On된다. 만일 서버 요청 부하가 최대가 되면 서버 클러스터에서 얻을 수 있는 가능한 최대 성능을 얻게 되며, 그렇지 않으면 가능한 최대 성능의 일부만을 사용하게 되면서 서버 전력 소비의 효율성은 떨어지게 된다. 부하 상황에 따라 서버의 전력 모드를 제어함으로써 전력 소비의 효율성을 높일 수 있다. 다시 말하면 현재 부하를 처리하는데 필요한 대수의 서버들만 On하고 나머지 서버들은 Off 한다. 기존의 서버 전원 모드 제어 방법에서는 고정된 주기로 서버 전원 모드를 제어하는 정적인 정책을 적용함으로써 동적으로 변하는 부하 환경에 잘 적응하지 못한다. 이를 개선하기 위해 본 논문에서는 동적 서버 전원 제어 알고리즘을 제안한다. 제안 방법에서는 서버 소비 전력의 이력을 갖고서 가까운 장래에 서버 소비 전력이 증가할 것인가를 예측한다. 이 예측에 따라 서버 모드 제어 주기를 동적으로 변경한다. 30대의 PC 클러스터를 이용하여 실험을 수행하였다. 실험을 통하여 일반적인 클러스터링 환경과 비교하여 제안된 방법은 동일한 성능을 유지하면서 29%까지 소비 전력을 절감했다. 또한, 서버 클러스터에서 서버 CPU 사용률 평균은 66% 증가하였다.