http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
MEMS 마이크로폰 설치공간의 주파수응답 보상을 통한 음성인식 개선
김현갑(Hyun-Kab Kim),김규식(Gyu-Sik Kim) 한국정보기술학회 2020 한국정보기술학회논문지 Vol.18 No.12
Recently, communication and multimedia devices are equipped with MEMS microphones. It is widely used due to its excellent acoustic characteristics compared to its small size, and is an important factor in implementing the voice recognition function. However, existing studies are insufficient to consider the effect on actual spatial characteristics. The microphone sensor is installed in a small chamber inside the product, and it is necessary to understand the spatial characteristics of this chamber. In this study, we attempted to improve speech recognition by identifying and compensating for the frequency response that changes due to the spatial characteristics of the installed chamber. To this end, a frequency response filter was calculated through a volumetric design experiment, and speech recognition improvement for filter application was confirmed by recognizing sentence-level speech in a speech to text method using a deep learning AI algorithm API. From this result, it can be seen that filter compensation for the environment can additionally help improve speech recognition.
슬림 스피커 진동판의 분할진동 모드와 열전달 관계 분석을 통한 진동 패턴 예측
김현갑(Hyun-Kab Kim),김희식(Hiesik Kim) 대한전자공학회 2016 전자공학회논문지 Vol.53 No.10
이 논문에서는 레이저를 통한 진동판 스캔과 열화상 카메라를 사용한 진동판 촬영, 두 가지 방법을 비교하며 슬림 스피커의 분할 진동을 검출하는 방법에 대해 살펴본다. 슬림 스피커는 평판형의 구조적인 특성상 분할진동이 두드러지게 나타나고, 설치되는 공간이 좁아 무빙 코일에서 발생하는 열의 냉각이 제한적이다. 이런 특성으로 인해 슬림 스피커에서 분할진동이 제품의 품질에 큰 영향을 미친다. 본 연구에서는 진동판에서 일어나는 분할진동의 영향과 무빙 코일에 의한 진동판의 열전달 관계를 비교 탐색한다. 비교를 위한 실험은 분할진동 모드의 측정과 진동판의 열 변화 측정을 진동판 스캔과 열화상 카메라 촬영의 2단계의 실험으로 진행한다. 동일 주파수에서 발생하는 분할진동 모드와 열전달 형태를 비교하여 서로 간에 어떤 영향을 미치고 있는 지 파악할 수 있다. 그리고 이를 통해 발견한 연관성을 통해 쉽게 촬영할 수 있는 열화상만으로도 슬림 스피커가 가지는 분할진동의 형태와 경향성을 빠르게 파악하여 최적 설계에 도움이 되는 자료로 사용할 수 있을 것이다. In this paper, In this paper, we use two methods to compare the slim speakers. That way, the diaphragm scan using laser and diaphragm photographed using a thermal imaging camera. Slim speaker has the structure of a flat plate type. Break-up mode by this characteristic is displayed in a larger size. Further, since the installation space is narrow, it has limited moving coil cooling.As a result, the break-up mode slim speakers, a significant impact on quality. In this study, try to connect the break-up mode of the diaphragm, the heat transfer mode of the diaphragm. Experiment for comparison, a two-step. The first step is to measure the divided vibration through the vibration plate scan. The second step measures the diaphragm photographed using a thermal imaging camera. Then, compare the results of both of the same frequency. Thus, comparing the heat transfer pattern and the pattern of break-up mode. Tend to be analysis of break-up mode from the pattern comparison, and document for the optimum design.
마이크로 스피커 진동판에 대한 분할진동 모드와 열전달의 관계 분석
김현갑(Hyun-Kab Kim),김희식(Hie-Sik Kim) 대한기계학회 2017 大韓機械學會論文集A Vol.41 No.4
스피커 진동판은 고유 특성에 의해 분할진동을 발생 시킨다. 이 분할진동은 진동판의 형상 변화를 가져올 정도로 뚜렷한 영향을 주는데, 본 논문에서는 IT 분야의 첨병인 스마트 폰을 포함한 초박형 멀티미디어 기기에서 많이 사용되는 마이크로 스피커를 그 대상으로 삼는다. 마이크로 스피커는 일반적인 스피커와 다른 평판형의 구조적인 형태와 공간적인 제약이 존재한다. 특히 구동 공간이 밀폐형으로 설계되어 무빙 코일에서 발생하는 열의 냉각이 열악하고 보조적인 서스펜션 구조를 갖추기 어렵다. 본 연구에서는 진동판의 열전달과 분할진동 모드의 연관성을 연구한다. 이를 위해 진동판의 레이저 스캔을 통한 분할진동 측정과 열화상 카메라 촬영을 통한 열변화 측정의 두 단계로 나누어 실험을 진행한다. 이를 통해 특정 주파수 범위에서 분할진동 모드와 열전달 형태를 비교함으로써, 열화상 카메라를 통한 촬영 결과로 진동판 분할진동 모드의 경향성을 빠르게 예상할 수 있어, 마이크로 스피커의 최적 설계에 도움이 되는 지표를 제공할 수 있을 것으로 기대한다. A speaker diaphragm generates a divided vibration. The influence of the break-up mode is sufficient to cause a shape change in the diaphragm. In this paper, is widely used in ultra-thin multi-media devices, including smart phones is the advance guard of the IT sector, the micro-speakers and its target. Micro-speakers are different from general speakers. The plate has structural form and space constraints. In particular, they utilize a closed-type drive space. It is difficult to provide cooling for the auxiliary suspension structure because of the heat generated in the moving coil. The present study considered the relationship between the break-up mode and the heat transfer of the diaphragm. An experiment was conducted in two stages to compare the embodiment of the break-up mode and heat transfer in a certain frequency range. The changes in the heat were determined through measurements and thermal imaging of the break-up mode. The break-up mode tendency of the diaphragm could be rapidly predicted based on the imaging results using the thermal imaging camera. This will help in the optimal design of micro-speakers.