http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김태훈,유영훈,김형중,안철민,백효채,이두연,김상진,Kim, Tae-Hun,Yu, Yeong-Hun,Kim, Hyeong-Jung,An, Cheol-Min,Baek, Hyo-Chae,Lee, Du-Yeon,Kim, Sang-Jin 대한영상의학회 2003 대한영상의학회지 Vol.49 No.4
Purpose: To elucidate the sequential radiologic manifestations of reperfusion edema after lung transplantation. Materials and Methods: The study group comprised five consecutive lung transplant recipients (M:F=3:2; mean age; 47.5 years) who between July 1996 and April 2002 underwent lung transplantation procedures (four, unilateral; one, bilateral) at our institution. We retrospectively reviewed the serial postoperative radiographs obtained and characterized the lung infiltrates. Results: Lung infiltrates compatible with reperfusion edema were present in all patients (5/5). Reperfusion edema appeared on day 1 in four, and by day 2 in the other. In all transplanted lungs, infiltrates were found in the perihilar and basilar regions, and were scored as maximal on day 1 in one, day 3 in two, day 4 in one and day 5 in the other. Conclusion: The recognition of sequential radiological manifestations helps identify recognition of reperfusion edema after lung transplantation. 목적: 본 연구는 폐이식후 재관류부종의 시기에 따른 방사선적 소견을 기술하려고 한다. 대상과 방법: 본원에서 폐이식을 시행받은 5명의 수여자를 대상으로 하였다. 1996년 7월부터 2002년 3월까지 세 명의 남자와 두 명의 여자가 폐이식을 받았고, 평균 연령은 47.5세 였다. 이 중 4 명은 한쪽 폐만 이식을 받았고, 1명은 양폐 이식을 받았다. 모든 수술후 연속적인 수술후 방사선 사진을 분석하고, 폐음영을 기술 하였다. 결과: 재관류부종은 네 명에서는 수술후 1일째에 , 한 명에서는 2일째에 나타났다. 최대치의 폐음영은 한 명에서 수술후 1일에, 두 명에서 수술후 3일째에, 한 명에서 4일째에, 나머지 한 명은 술후 5일째에 있었다. 결론: 재관류부종은 모든 폐이식 이후에 일어나는 현상이며 방사선학적으로는 폐문주위와 하폐에 우세하게 분포하는 미세 망상형 또는 기강경화로 나타나며, 약 5일 이내에 최대 시기를 거치고 3주 이내에 특별한 치료없이 소실된다.
생체적합성을 가진 천연고분자의 응용 및 기능성에 관한 연구
김태훈,김두언,성아영,Kim, Tae-Hun,Kim, Doo-Eon,Sung, A-Young 대한화학회 2009 대한화학회지 Vol.53 No.5
Chitosan, a natural polymer, has been importantly considered as biomedical materials due to its good biocompatibility and various bio-active characteristes. Water soluble chitosan was then copolymerized EGDMA(ethylene glycol dimethacrylate; used as a cross-linking agent for the free-radical copolymerization), MMA (methylmethacrylate), MA (methacrylic acid) in the presence of AIBN (azobisisobutyronitrile) as a radical initiator. The water content and visible transmissibility, ultimate strength of copolymerized ophthalmic polymer were measured to be 24$\sim$59%, 88$\sim$89% and 0.1$\sim$2.4 Kgf, respectively. And also, we tested for antimicrobial activities against staphylococcus aureus, Pseudomonas aeruginosa. They showed that in case of antimicrobial activities, the values including chitosan were much higher than that of the polymers of no including chitosan, suggesting that the copolymer can be used as a novel ophthalmic material of high performance. 천연고분자물질인 키토산은 생체적합성과 생체활성이 좋은 특성을 가지고 있기 때문에 생체 의료용 재료로 중요하게 다루어지고 있다. 본 연구는 수용성 키토산을 교차결합제인 EGDMA (ethylene glycol dimethacrylate)와 HEMA (2-hydroxyethyl methacrylate), MMA (methylmethacrylate), MA (methacrylic Acid) 그리고 개시제인 AIBN을 사용하여 공중합 하였다. 공중합한 안의료용 재료의 물리적 특성을 측 정한 결과 함수율 24$\sim$59%, 가시광선 투과율 88$\sim$89%, 인장강도 0.1$\sim$2.4 Kgf를 나타내었다. 또한 포도 상구균, 녹농균에 대한 항균성 시험 결과 키토산을 포함하지 않은 고분자에 비해 높은 항균성을 나타내 어 향후 이 공중합체가 고기능성을 가진 안의료용 재료로 사용될 수 있을 것으로 기대된다.
생산성 및 비용 분석을 통한 철골 구조체 건설 자동화 시스템의 요구성능 분석
김태훈,이웅균,조훈희,강경인,Kim, Tae-Hoon,Lee, Ung-Kyun,Cho, Hun-Hee,Kang, Kyung-In 대한건축학회 2012 대한건축학회논문집 Vol.28 No.1
Automated building construction systems are currently being employed as an effective alternative for the recent aging of the workforce and the lack of skilled labor. In order to apply such systems effectively in building construction process, the influence on overall construction process by the systems should be examined in the developing phase. Moreover, appropriate performance criteria for the systems should be determined based on the aspect of cost-effectiveness. Therefore, this study analyses performance criteria of an automated building construction system for steel framework by using a simulation technique, CYCLONE, and economic feasibility analysis in order to developing and employing the system efficiently. The study targets the steel girder installation process through a manless steel frame and joint method and bolting robot which is developed by the robot-based construction automation (RCA) group in Korea. The result shows that the manless steel frame and joint method leads substantial productivity improvement for the steel girder installation process by the reduction of loads for resources. In addition, considering productivity and costs of the system on overall process, the maximum permissible capital cost for the bolting robot increases dramatically when a cycle time of the robot ranges from 320 to 440 seconds. The results of this study will help develop cost-efficient system, and serve as a decision support model for appropriate resource inputs of the construction automation method.
김태훈,한성호,권민정,이승희,Kim, Tae-Hun,Han, Seong-Ho,Gwon, Min-Jeong,Lee, Seung-Hui 대한인간공학회 2006 大韓人間工學會誌 Vol.25 No.2
Window buttons located on a task bar provide information about windows that have been open as well as active. When the number of buttons on the task bar increases, the button size gets smaller and as a result, it is more difficult to identify. This study proposes new alternatives of presenting window buttons to search for a target button efficiently. An experiment was conducted to evaluate the usability of the new. Factors manipulated in the experiment include 'button arrangement methods' and 'order of buttons'. The 'button arrangement methods' factor is composed of three levels, 'one line', 'changeable line', and 'grouping buttons'. The 'order of buttons' factor is composed of three levels, 'fixed order', 'click-right', and 'order control by user'. The results showed that the main effects were significant in search time. In subjective satisfaction, the interaction effect was also significant. The results could be applied to the design of small screens such as PDA or cellular phones.