http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전거레코드 표목의 구조화 연구 - 인명과 단체명 전거레코드의 표목을 중심으로 -
김태수,김이겸,이혜원,김용광,박지영,Kim, Tae-Soo,Kim, Lee-Kyum,Lee, Hye-Won,Kim, Yong-Kwang,Park, Zi-Young 한국과학기술정보연구원 과학기술정보센터 2009 Journal of Information Science Theory and Practice Vol.40 No.3
본 연구에서는 기존의 전거제어 방식의 단점을 보완할 수 있는 표목의 구조화 방안을 제시하고자 하였다. 먼저 표목의 연결 구조를 전거형식과 그 이형을 참조로 연결하는 구조에서 동등한 접근점 간의 연결 구조로 개선하였으며, 전거형식 대신 전거제어번호를 식별기호로 도입하는 방안을 고려하였다. 그리고 동명이인이나 동명이단체의 식별을 위해 관련 저작정보를 제시하는 등 추가 식별정보를 제시하였으며, 전거데이터 표기체계를 기술하여 전거데이터의 교환과 공유를 촉진시키는 데 활용하도록 하였다. 또한 이 연구에서 제시한 표목의 구조화 방식을 적용하여 전거레코드를 작성하기 위한 전거시스템을 구축하였다. 그 결과, 대표형식을 선정하는 데 있어서의 어려움이 있었던 기존의 방식과 달리 전거형식을 폐지해도 전거레코드의 작성 및 유지에 어려움이 없으며, 전거레코드의 식별과 교환 측면이 강화되었음을 확인하였다. This study aims to suggest some idea for construction of headings in authority records to improve conventional method for authority control. The reference structure between established form and other forms was replaced by the link structure based on access points and adopting standard authority numbers was considered. Additional elements such as work information to distinguish homonym and notational system of the headings to promote sharing of authority records were also addressed. Authority records management system was constructed to test structure of headings suggested in this study, too. Through this research, we confirmed that management, identification, and sharing of authority records were considerably improved compared with the conventional authority control system.
A Study on the Development of the Korea Subject Heading
김태수,Kim, Tae-Su 한국도서관협회 1996 圖協會報 Vol.37 No.5
한글 주제명표목의 구조를 확립하는데 필요한 기본원칙을 제시하였다. 불연산기호를 사용하게 되면 주표목과 세목간을 구분할 필요가 없어진다. 일부 표목에서는 지명이 세목으로 사용되고 도 다른 표목에서는 지명이 주표목으로 사용되는 등 혼란이 있었다. 자동화 시대에, 어떤 용어가 탐색어의 첫번째 이치에 오는가 하는 것은 중요한 문제가 아니다. 시대구분을 제외하고는 모든 세목을 독립된 표목으로 사용해야 할 것이다. 접속사'와(과)' 또는 복판점(ㆍ)으로 결합된 표목과 도치표모의 형식은 주제명표목에서 사용되지 않는다. 표목과 관련된 용어간을 연결하는 수단으로 색인시스템에서 사용해 온 기호를 도입 하였다.
크레인의 이동거리 측정을 위한 무선 송수신기 설계 및 평가
김태수,오인열,전중창,Kim, Tae-Soo,Oh, Inn-Yeal,Chun, Joong-Chang 한국정보통신학회 2007 한국정보통신학회논문지 Vol.11 No.4
본 논문에서 제안하는 크레인의 이동거리 측정시스템은 전파의 위상 및 크기를 이용하여 거리를 인식하는 기술이다. 제안하는 기술은 거리측정용 무선송수신기를 설계하고, 측정시스템을 구현하며, 송수신된 900Mhz대 RF 신호로부터 중간주파수인 450Khz의 아날로그 데이터를 디스크에 저장한다. RF 측정결과 9.3 dBm의 출력과 96dBc@10khz의 위상 잡음특성을 얻었고 얻어진 RF 신호에 대한 450Khz 데이터를 디지털신호처리를 통하여 거리정보를 얻는 것이다. 측정된 거리의 평가를 위해서 실제거리와 측정된 거리를 비교분석하고, 또한 평균처리 및 진폭특성을 통한 측정오차 제거 방법을 제시하였다. 최종거리 측정 결과 Ref. 신호에 비하여 10m-30m 거리에 대하여 0.12, 그리고 5m 이내의 근거리 실험에서 위상오차가 0.00422이었으나, 진폭특성을 보완하여 4m에서 2.4E-04의 오차를 얻을 수 있었다. In this paper, the measurement system of crane moving range is concerned with range recognition technology using phase and magnitude of radio wave. By the proposed technology, we design the radio transmitter and receiver and realize the measurement system, and save the data in disk that is earned from 900Mhz RF signal, middle frequency 450khz of analog signal. As a result of RF measurement, we got 9.3 dBm of RF output and 96 dBc@10khz of phase noise. Range information is earned the data through digital signal processing of IF signal. For the estimation of range measured, we analyze the difference between real range and measurement range, and also suggest the method to remove the measurement error using average processing and amplitude properties. A result is 0.12 and 0.00422 deviation in l0mn-30m and within 5m respectively, and then 2.4E-04 deviation in 4m by using compensation of level characteristics lately.
김태수,김창연,민지연,최영규,강대희,Kim, Tae-Soo,Kim, Chang-Yeon,Min, Ji-Yeun,Choi, Young-Gue,Kang, Dae-Hee 사상체질의학회 2004 사상체질의학회지 Vol.16 No.3
1. Objectives The Purpose of this study was to evaluate whether use of Sasang -Bang with western medication may injury the liver and the kidney function. We clinically studied the change Liver function test and BUN/Cr in patients who were hospitalized in Hana oriental Medical center for more than 1 month. 2. Methods The subjects were 33 patients admitted in Hana Oriental Medical center. All patients had been checked Liver Function Test and BUN/Cr three times every 2 weeks. 3. Results Aspartate Aminotransferase(AST), Alanine Aminotransferase(ALT), Gamma-Glutamyl transferase(GGT), Total billirubin, BUN, Creatine didn't change, compared with previous 2 weeks and 4 weeks. 4. Conclusions This study suggests that even though there are few toxic Sasang-Bang, in general, herbal medications with western medications which are prescribed by oriental medicine doctors should be carefully administered not to hurt liver and kidney function.
페라이트계 스테인리스강 용접접합부의 모재 블록전단파단에 관한 실험적 연구
김태수,Kim, Tae Soo 한국강구조학회 2016 韓國鋼構造學會 論文集 Vol.28 No.5
최근에 스테인리스강의 우수한 연성과 내식성 등의 재료적 특성으로 건축물의 구조용 강재로 적용하기 위한 많은 연구들이 수행되어 오고 있다. 특히, 니켈을 거의 함유하고 있지 않은 페라이트계 스테인리스강은 재료비 측면에서 니켈을 함유하고 있는 오스테나이트계 스테인리스강에 비해 저렴하고 탄소강에 비해서는 월등한 내식성능과 구조성능을 제공하기 때문에 그 사용성이 증대되고 있다. 본 연구에서는 페라이트계 스테인리스강 용접접합부에 있어 용착금속이 아닌 모재 블록전단파단의 구조적 거동을 조사하기 위해 용접길이와 용접방법(아크, 티그)을 변수로 하여 단순인장 실험을 실시하였다. 용접접합부의 블록전단 거동은 용접에 의한 삼축응력효과 때문에 볼트접합부의 블록전단 거동과 상이하며, 현행설계기준식은 이러한 특성을 반영하지 못하고 있다. 티그용접 접합부의 변형능력과 최대내력이 아크용접 접합부보다 높게 나타났고, 현행기준식과 기존연구자에 의해 제시된 내력식에 의한 예측내력과 실험결과 최대내력을 비교 검토하였다. Many researches on the application of stainless steels as structural steels have been performed thanks to their material properties such as superior ductility and corrosion resistance. Ferritic stainless steels(STS430) with little or no nickel have been used increasingly in building structure because it is inexpensive compared to austenitic stainless steels(STS304) with nickel, but provide performances similar to the austenitic stainless steel. This paper deals with block shear fracture behavior of base metal in stainless steel welded connection. Although the block shear fracture behavior for welded connection due to stress triaxiality is different from that of bolted connection, the block shear strength of welded connection in current design specifications has been predicted based on that of bolted connection. The main parameters are weld length and welding process(Arc and TIG welds). The ultimate strengths of TIG welded specimens were higher than those of arc welded specimens and current design predictions by AISC, EC3 etc. were compared with test strengths.
건축구조용 고성능강(HSA800) 용접 H형단면 기둥의 압축강도에 관한 연구
김태수,이명재,오영석,이강민,김도환,Kim, Tae Soo,Lee, Myung Jae,Oh, Young Suk,Lee, Kang Min,Kim, Do Hwan 한국강구조학회 2012 韓國鋼構造學會 論文集 Vol.24 No.6
최근 구조물의 고층화, 대형화 및 장스팬 활용 등의 요구로 고강도 고성능 재료의 건축물과 교량에의 적용이 증가하는 추세이다. 본 논문은 고성능강의 건축구조용 재료 특성과 고성능강재를 사용한 부재의 설계 기준을 위한 기본적인 연구의 일부이다; HSA800의 재료적 특성은 한국산업표준의 요건과 비교하였다. 용접 H-형 단주의 국부좌굴 거동과 현행 판폭두께비 설계 제한치를 검토 위하여 다양한 판폭두께비 변수를 계획하고, 단축압축실험을 실시하였다. 또한, 유한요소결과로 얻어낸 단주의 좌굴거동을 실험결과와 비교하였고 해석결과가 고성능강 H형 단면 단주의 좌굴거동을 잘 예측하는 것으로 나타났다. Recently, high performance(strength) steels have been utilized to structural materials in buildings and bridges with the demand for high-rise and long-span of main structures. This paper is a series of basic study for the design specification of structural members using high performance steel, material properties of high performance rolled steel building structures; material properties of HSA800 steel was compared with the requirements of Korean Standards(KS) for HSA800. Welded H-shape stub columns with variables of width-to-thickness ratios are planned in order to investigate the local buckling behaviors and check the current design limit of width-to-thickness ratio and uniaxial compressive tests are carried out. In addition, the buckling behaviors of stub columns obtained finite element analysis were compared with those of test results.
과도한 마모를 보이는 환자에서 완전도재관을 이용한 구강회복 증례
김태수,이재현,이철원,이원섭,이수영,Kim, Tae Su,Lee, Jae Hyun,Lee, Chul Won,Lee, Won Sup,Lee, Su Young 대한치과보철학회 2016 대한치과보철학회지 Vol.54 No.3
치아의 마모는 점진적으로 발생하는 생리적인 현상으로 알려져 있다. 생리적 마모는 그 정도가 적고 치조골의 보상성 성장과 치아의 정출에 의해 수직고경이 유지된다고 보고되고 있다. 하지만 과도한 병적마모는 병적인 치수상태, 교합부조화, 기능장애와 심미적인 문제를 야기하여 완전 구강회복술을 요하는 경우가 많다. 수복 시에는 기능과 심미를 회복할 수 있는 적절한 수직고경의 변경이 필요하며 근신경계와 조화를 이루는 고경의 결정이 중요하다. 본 증례는 36세 여성으로, 전반적인 치아마모와 심미적 불만족을 주소로 내원하였다. 마모된 정도와 심미를 고려하여 상악 전치부 절단면 기준으로 감소한 수직고경을 2 mm 회복하고 완전도재관을 이용하여 수복하였다. 이에 적절한 심미적, 기능적 결과를 얻었기에 이를 보고하는 바이다. Tooth wear is known as a normal physiological process which gradually progresses. It is reported that vertical dimension can be kept stable because amount of physiologically worn loss could be compensated by growth of alveolar bone and tooth eruption. However, excessive tooth wear as pathologic wear can cause pathologic pulp, disharmony with occlusal plane, functional disorders and esthetic problems so that full mouth rehabilitation could be needed in these cases. Recovery of function and esthetic improvement should be considered for alteration of the vertical dimension. Determination of the vertical dimension of occlusion is needed to be in harmony with the neuromuscular system. This clinical report describes 36 year-old female patient who had chief complaint of severely worn dentition and esthetic discomfort. An increase of 2.0 mm at maxillary incisal edge was done to restore vertical dimension. It was based on the degree of tooth wear and esthetics.