http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유도 가열식 저온용융로를 이용한 방사성페기물 유리화: 유리 고화체 특성
김천우,박은정,최종락,지평국,최관식,맹성준,박종길,신상운,송명재 한국세라믹학회 2002 한국세라믹학회지 Vol.39 No.6
원자력발전소에서 발생하는 이온교환수지와 잡고체를 동시에 처리하기 위하여 유도 가열식 저온용융로를 이용한 유리화 실증시험을 수행하였다. 유리 고화체의 화학적 내구성을 평가하기 위하여 최종 유리에 대해 수행한 PCT 침출 시험결과 기준유리 보다 내 침출성이 우수한 것으로 나타났다. 최종 유리 고화체에 대해 열처리 실험 결과 액상온도는 1048K (775$^{\circ}C$)로 측정되었다 유리 고화체에 대한 압축강도 측정 결과 규제치인 34kg/$\textrm{cm}^2$ 보다 약 90배 높은 값을 나타내었다. 저온용융로(CCM)의 하부, 중앙, 상부 유리 고화체의 미세구조 관찰 결과 이차상 없는 균질한 상태였다. 환원성 유기물을 함유한 이온교환수지에 잡고체를 동시 투입하여 자성 금속상 침전을 방지할 수 있었다. 유리화 실증시험을 통하여 감용비 74를 달성하였다. In order to simultaneously vitrify the ton Exchange Resin(IER) and Dry Active Waste(DAW) generated from the Nuclear Power Plants, a vitrification pilot test was conducted using an induction cold crucible melter. The PCT result evaluating the chemical durability of the vitrified from showed that the final glass was more durable than the benchmark glass. Liquidus temperature for the final vitrified form was 1048 K(775$\^{C}$) fur heat treatment experiments. The value of the compressive strength for the vitrified form was ninety times higher than the regulation limit, 34 kg/㎠. The glasses on bottom, middle and top of the CCM were homogeneous with no secondary phase. The precipitation of the magnetic metal phase was able to be avoided by simultaneously fEeding of DAW with IER containing strongly reducing organics. Volume reduction factor of 74 was achieved through the vitrification Pilot test for mixed waste.
중${\cdot}$저준위 방사성폐기물 유리고화체의 물리${\cdot}$화학적 특성 연구
김천우,박병철,김향미,김태욱,최관식,박종길,신상운,송명재,Kim, Cheon-Woo,Park, Byoung-Chul,Kim, Hyang-Mi,Kim, Tae-Wook,Choi, Kwan-Sik,Park, Jong-Kil,Shin, Sang-Woon,Song, Myung-Jae 한국세라믹학회 2001 한국세라믹학회지 Vol.38 No.9
원자력발전소에서 발생하는 폐수지, 잡고체, 붕산폐액을 유리화 하기 위하여 폐기물별 조성을 바탕으로 유리조성 연구를 수행하였다. 폐수지, 잡고체를 각각 유리화 할 수 있는 두 개 의 후보유리 RG-1과 DG-1 그리고 폐수지, 잡고체, 붕산폐액을 혼합하여 처리할 수 있는 후보유리 MG-1을 개발하였다. 각 후보유리에 대해 운전변수, 고화체 품질, 가용 효과를 평가하였으며 일부 특성들은 실험실적으로 확인하였다. 운전 변수 가운데 유리의 점도와 전기 전도도는 세 후보유리 모두 적정운전 범위값 내에 만족하였으며 밀도, 화학적 견고성, 상안정성 등 고화체의 품질 또한 우수하였다. 개발한 유리 조성 연구를 바탕으로 폐수지, 잡고체, 혼합폐기물을 유리화 할 경우 감용비는 각각 21, 89, 75로 평가되었다. In order to vitrify the Ion-Exchange Resin(IER), Dry Active Waste(DAW), and borate concentrate generated from the commercial nuclear facilities, the glass formulation study based on the their compositions was performed. Two glasses named as RG-1 and DG-1 were formulated as the candidate glasses for the vitrification of hte IER and DAW, respectively. A glass named as MG-1 was also formulated as a candidate glass for the vitrification of the mixed wastes containing the IER, DAW, and borate concentrate. The process parameters, product qualities, and economics were evaluated for the candidate glasses and confirmed experimentally for the some properties. The glass viscosity and electrical conductivity as the process parameters were in the desired ranges. the product qualities such as glass density, chemical durability, phase stability, etc. were satisfactory. In case of vitrifying the wastes using our developed glass formulation study, the volume reduction factors for the IER, DAW and mixed wastes were evaluated as 21, 89 and 75, respectively.