http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김진선,김학준,한방우,우창규,김용진,이상린,문상철,Kim, Jin-seon,Kim, Hak-Joon,Han, Bangwoo,Woo, Chang Gyu,Kim, Yong-Jin,Lee, Sangrin,Moon, Sangchul 한국입자에어로졸학회 2018 Particle and Aerosol Research Vol.14 No.4
In this study, we developed a flat-plate type wet electrostatic precipitator that generates stable corona discharge compared to wire type discharge electrode. In order to compare the particle removal efficiency according to the shape of the discharge electrode such as the variation of the horizontal and vertical distance between spiked edges, and the variation of the height of discharge pin support were tested. As a result, when the horizontal distance between spiked edges was increased up to 36 mm, the vertical distance between spiked edges was increased up to 54 mm, and the height of the discharge pin support was increased up to 76 mm, the removal efficiency of PM10 was maintained at approximate 60.0%. Furthermore, the removal efficiency of particles over $5{\mu}m$ was about 80% or more. When the flow rate was 4 m/s, the gap between collection plates was 60 mm, and -14 kV was applied to the discharge electrode. The particle removal efficiency of the flat-plate type electrostatic precipitator was maintained when the horizontal and vertical distance between spiked edges, and the height of the discharge pin support was below a certain level. Those variables may be the important design factors for the shape of the discharge electrode. Therefore, when designing the electrostatic precipitator with multiple channels, the horizontal and vertical distance between spiked edges, and the height of discharge pin support must be selected in consideration of the weight of the discharge electrode and the processing cost.
부식된 핵연료 피복관과 지지격자 사이의 프레팅 마멸 특성
김진선,박세민,김용환,이승재,이영제,Kim, Jin-Seon,Park, Se-Min,Kim, Yong-Hwan,Lee, Seung-Jae,Lee, Young-Ze 한국트라이볼로지학회 2007 한국윤활학회지(윤활학회지) Vol.23 No.3
Fuel cladding tubes in nuclear fuel assembly are held up by supporting grids because the tubes are long and slender. Fluid flows of high-pressure and high-temperature in the tubes cause oscillating motions between tubes and supports. This is called as FIV (flow induced vibration), which causes fretting wear in contact parts of tube and support. The fretting wear of tube and support can threaten the safety of nuclear power plant. Therefore, a research about the fretting wear characteristics of tube-support is required. The fretting wear tests were performed with supporting grids and cladding tubes, especially after corrosion treatment on tubes, in water. The tests were done using various applied loads with fixed amplitude. From the results of fretting tests, the wear amounts of tube materials can be predictable by obtaining the wear coefficient using the work rate model. Due to stick phenomena the wear depth was changed as increasing load and temperature. The maximum wear depth was decreased as increasing the water temperatures. At high temperatures there are the regions of some severe adhesion due to stick phenomena.
김진선,최연철,Kim Jin-Seon,Choi Yeon-Chul 한국조경학회 2004 韓國造景學會誌 Vol.32 No.5
In this study, 1 dependent variable and 9 independent variables were established to examine suitable illuminance by spaces in urban parks in consideration of night users' psychological reactions and activity types. Such fixed variables were evaluated by a series of experiments of changing illuminance, and correlation among those variables was verified by correlation analysis and multiple regression analysis to suggest suitable illuminance by spaces. The results of this study are as follows: 1) The independent variables influencing suitable illuminance by spaces in urban parks were directly influenced rather by the psychological reaction of night users than the activity types by spatial functions. 2) Securing suitable illuminance by spaces commonly increased spatial availability, created certain atmosphere, and provided safety in the psychological reaction of night users. 3) Suitable illuminance by spaces in urban parks is: Central square is 31.88lx, resting space 6.30lx, exercising space 33.14lx, children's playground 14.19lx, pedestrian road 12.29lx, entry space 16.30lx, and green space 7.03lx. That is, when a place had more positive activities, spatial illuminance was increased. 4) Though comparison by spaces with the illuminance standard for urban parks as mentioned in KS A 3011-1993 can not be made, such illuminance was relatively compatible with the permissible range of illuminance in the author's opinion. It is expected that this study investigating suitable illuminance by spaces for night use in urban parks, will provide necessary knowledge for securing suitable illuminance by spaces in urban parks through classifyingin detail the illuminance standard of KS A 3011-1993. Besides, by helping make us aware of the importance of illuminance in urban parks as well as of external space in the night, this study will contribute to academic research and development in the field of landscape architecture and associated fields and be utilized in establishing legal and institutional standards.
김진선,Kim, Jin-Seon 대한수의사회 2011 대한수의사회지 Vol.47 No.9
최근 양돈협회 자료에 의하면 FMD가 발생하였으나 임상증상이 발현된 돼지만을 부분적으로 살처분한 양돈장이 전국적으로 558호에 약 83만두 규모로 알려져 있다. 또한 앞으로도 환절기나 동절기에 FMD가 재발할 가능성이 있다. 그렇다면 부분 살처분을 실시한 농장은 FMD증상이 어떻게 변화하고 음성화는 가능한 것일까? 기존의 부분 살처분 농장은 FMD바이러스가 농장 내 상존하여 지속적이고 반복적으로 피해를 주지 않을까? FMD가 발생하여 부분 살처분 된 농장이 하루빨리 안정화되고 음성화를 이루기 위해 어떤 조치가 필요한 것인가에 대해 합리적인 대책이 요구된다. 다음의 사례는 AI센터에서 FMD가 발생한 후 음성화 되기 까지 과정을 요약 보고한 자료이다. FMD 음성화에 작은 밑거름이 되었으면 한다.