http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김지호,정윤호,김재석,Kim, Ji-Ho,Jung, Yun-Ho,Kim, Jae-Seok 한국통신학회 2007 韓國通信學會論文誌 Vol.32 No.9c
본 논문에서는 OFDM 기반 무선 LAN 시스템에서 긴 훈련심볼을 이용하는, 시간동기 오차의 영향이 고려된 IQ imbalance 추정 및 보상 기법을 제안한다. 기존의 긴 훈련심볼을 이용한 IQ imbalance 보상 기법은 시간동기 오차에 민감한 구조를 갖기 때문에 시간동기 오차가 필연적인 실제 시스템에서는 심각한 성능 저하를 보인다. 본 논문에서는 시간동기 오차로 인해 발생하는 위상회전을 상쇄시킬 수 있는 새로운 criterion을 정의하고, 이에 따른 IQ imbalance 추정 및 보상 기법을 제안한다. 제안된 기법은 시간동기 오차가 존재할 경우에도 IQ imbalance 의 영향을 이상적인 경우 대비 최대 0.2dB 이하로 보상할 수 있으며, IEEE 802.11a 시스템의 54Mbps 전송모드에 적용하였을 경우 기존 기법에 비해 약 4.3dB의 성능 이득을 보인다. 제안된 기법을 이용한 IQ imbalance 추정 및 보상단은 Verilog HDL을 이용하여 하드웨어 설계 및 검증 되었으며, 0.18um CMOS 공정을 이용하여 합성한 결과, 약 75K gates 와 6K bits의 메모리로 구현되었다. This paper proposes an efficient estimation and compensation scheme of IQ imbalance for OFDM-based WLAN systems in the presence of symbol timing error. Since the conventional scheme assumes perfect time synchronization, the criterion of the scheme used to derive the estimation of IQ imbalance is inadequate in the presence of the symbol timing error and the system performance is seriously degraded. New criterion and compensation scheme considering the effect of symbol timing error are proposed. With the proposed scheme, the IQ imbalance can be almost perfectly eliminated in the presence of symbol timing error. The bit error rate performance of the proposed scheme is evaluated by the simulation. In case of 54 Mbps transmission mode in IEEE 802.11a system, the proposed scheme achieves a SNR gain of 4.3dB at $BER=2{\cdot}10^{-3}$. The proposed compensation algorithm of IQ imbalance is implemented using Verilog HDL and verified. The proposed IQ imbalance compensator is composed of 74K logic gates and 6K bits memory from the synthesis result using 0.18um CMOS technology.
간질(Fasciola hepatica) 피낭유충의 생존성 및 감염성에 관한 연구
김지호,김종택,조신형,이정길,Kim, Ji-ho,Kim, Jong-taek,Cho, Shin-hyeong,Lee, Chung-gil 대한수의학회 1998 大韓獸醫學會誌 Vol.38 No.1
Fasciola hepatica eggs were obtained from the bile of infected cattle at a local abattoir. Metacercariae(MC) were produced using Lymnaea viridis, the intermediate host of the parasite. They were stored in distilled water at refrigerator($3{\sim}5^{\circ}C$) and at room temperature($22{\sim}27^{\circ}C$). The viability and infectivity of the MC were determined at monthly intervals for 12 months. The viability was determined by both microscope and excystation, and the infectivity by infecting mice. The MC stored at room temperature had a high viability up until 60 days, and thereafter the viability declined rapidly ; at day 120, only 2.5% of the MC were excysted. Most of the MC stored at refrigerator retained the viability up until 90 days, and thereafter the viability declined slowly ; about half of them were viable at day 210 and 5% of them retained the viability until day 270. The survival rates of the MC determined by microscope were always higher than those determined by excystation(p<0.05). The infectivity of the MC wisely followed the viability at the two different storage temperatures. Most of the mice infected orally with the MC died within 3-9 weeks of acute fasciolosis.
김지호,정현식,권오엽,신종호,Kim, Ji-Ho,Jeong, Hyeon-Sic,Kwon, Oh-Yeob,Shin, Jong-Ho 한국터널지하공간학회 2014 한국터널지하공간학회논문집 Vol.16 No.1
본 연구에서는 앵커의 대표적 유형인 인장형 앵커와 압축형 앵커, 최근 개발되어 널리 사용되고 있는 다중정착 지반앵커의 지반 내 거동을 비교, 분석하여 그 적용 특성을 평가하였다. 이를 위하여 대형모형실험과 현장시험을 통하여 앵커 유형별 하중-전단응력 관계를 확인하였으며 이를 수치해석 결과와 비교, 분석하였다. 검토결과 앵커 유형에 따른 하중과 지반강도, 전단응력의 관계를 규명할 수 있었으며, MLT 앵커는 인장형 앵커에 비해 1.3배, 압축형 앵커에 비해 1.5배의 인발저항 효과가 있는 것을 확인할 수 있었다. 본 연구결과를 다양한 지반조건에서 확장하여 적용할 경우 지반조건에 따른 앵커 유형별로 적용이 가능한 최대 인발 저항력을 제안할 수 있을 것으로 판단되며, 이는 지반앵커의 설계 및 시공에서 매우 유용하게 이용될 수 있을 것이다. In order to identify a load transfer mechanism of ground anchors, the behavior of multi load transfer ground anchor systems was investigated and compared with those of compression type anchors and tension type anchors. Large scale model tests were performed and stress-strain relationships were obtained. The load transfer mechanism of ground anchors was also investigated in the field tests. Finally, numerical analyses to predict the load-displacement relationships of anchors were conducted. It is concluded that the load transfer characteristics of MLT anchors are mechanically much more superior in the pull-out resistance effect than those of existing compression and tension type anchors. From the results of research work, we could suggest that the max pull-out capacity of anchor capacity to each the soil condition. Also, the MLT anchors can be used to achieve both structural enhancement and economic construction in earth retaining or supporting structures.
김지호,권정훈,박지성,임기조,Kim, Ji-Ho,Kwon, Jung-Hoon,Park, Ji-Sung,Lim, K.J. 한국전기전자재료학회 2015 전기전자재료학회논문지 Vol.28 No.9
The haptic actuator needs to downsize in the mobile devices continuatively. In this work, the hinge lever mechanism was used in order to prevent lowering the vibration performances of the downsized actuator. The vibration performances of actuator with and without hinge-lever mechanism were simulated by the finite element method analysis. It is concluded that the hinge-lever mechanism may be a proper measure to prevent lowering the vibration performances in the downsized piezoelectric actuator.
김지호(Kim, Ji-Ho),김태원(Kim, Tae-Won),이승오(Lee, Seung-Oh),박영진(Park, Young-Jin) 한국산학기술학회 2013 한국산학기술학회논문지 Vol.14 No.12
기존 해수취수시스템의 경우 해수오염, 부유물질, 취수의 불안정 및 유지관리의 어려움 등으로 인해 해수취 수의 어려움이 발생하곤 하였다. 이와 같은 단점을 극복하고자 매설식 해수취수시스템을 개발하여 격포항에 설치하였 다. 본 연구에서는 새로운 시스템의 거동을 검토하고자, 수질관측 및 3차원 수치모의 실험을 수행하였다. 이 취수시스 템에 대하여 총 5회에 걸쳐 COD, 총질소, 총인, PH 그리고 부유물질에 대하여 수질분석을 수행한 결과, COD, 총질 소, 총인, PH의 경우 취수 전 ? 후 저감 효과는 미미하였다. 그러나 부유물질의 경우 수산용수 1급 5 mg/L 이하로 정 화되는 효과가 나타났다. 수치모형은 유한체적법 기반의 CFX 모형과 RNG k-ε 알고리즘을 선정하였으며, 여과사, 외 부관 지름 및 두께를 재현하기 위해서 다공성 알고리즘을 적용하였다. 수치모의 실험을 수행한 결과, 2중관 구조가 내외부 관 사이의 공간에 의해 압력의 분포를 균등하게 하여, 흐름 상태나 안정적인 취수측면에서 유리한 것으로 분 석되었으며, 취수관을 다열 배치하였을 때 중앙 취수관과 비교하여 양쪽 취수관에서 유량이 0.98배로 감소하였지만 유동의 간섭현상은 발생하지 않았다. Seawater intake systems have significant problems due to seawater pollution, suspended solids, unstable intake and maintenance etc. An underground type seawater intake system was newly developed to overcome the existing weaknesses and was facilitated in Gyukpo port. In this study, to check the performance of the new system, the samples for water quality and the 3-D numerical modeling test were conducted. The five times test included the COD, total nitrogen, total phosphorus, pH, and suspended solid for the intake system. The analyses show that the COD, total nitrogen, total phosphorus, PH showedminor changes before and after. On the other hand, the change in suspended solids was significant and water was purified below 5 mg/l, first level fisheries water, after. The numerical model adopted the RNG k-ε algorithm and the CFX model based on the finite volume method. The porosity algorithm was used to reproduce filtered-sand, outer diameter, and thickness. The numerical results showed that the double pipe is advantageous in that it provides a uniform pressure between the inner and outer pipe for the flow to be stable. In addition, the use of multiple intake pipes did not interfere with the discharge reduction of 0.98 at the both intake pipes compared with the central intake pipe."