김소월 「시혼」의 이기론적(理氣論的)고찰

김지혜 ( Ji Hye Kim ),권유성 ( Yu Seung Kwon ) 한국문학언어학회( 구- 경북어문학회) 2010 어문론총 Vol.52 No.-

This study aims at clarifying that Kim, So-Wol`s poetics is based on LiKi(理氣)philosophy. And this is to show the distinction between Western ideas like Romanticism which is accepted by Kim-uk and So-Wol`s traditional poetics. The results are as follows. First, So-Wol is realized paradoxical sense which can find out positive meaning from negative thing and overcome Western dichotomy by LiKijimyo(理氣之妙) principal means that Li(理) as Hyungisanja(形而上者: metaphysical thing) and Ki(氣) as Hyungihaja (形而下者: physical thing)are neither divided nor united. Second, So-Wol emphasizes that immutable character of Sihon(詩 魂) on his poetics because he wants to show Li`s character as inevitable cause and right. As he authorizes Sihon(詩魂) ontological and axiological character of Li, Sihon(詩魂) has Good truth and thereby has good effect for society. Unlike Kim-uk`s romanticism, to display subjectivity on So-Wol`s poetics is based on LiKi philosophy has a effect for society, because the subjectivity has a moral sensibility. Last, like Li and Ki, Sihon(詩魂) is manifested on poetry by Umyoung(陰影), so poetry is valuated by not Sihon but Umyoung. But So-Wol contradicted himself by asserting that Umyoung(陰影) isn`t discussed merits and demerits. This is explained by considering LiKijimyo(理氣之妙). Ki is a manifestation of Li, therefore when we see poetry as Ki with view is based on authenticity, Ki is not a thing of judgement. But when we poetry with view is based on substantiality, Ki is a thing of judgement. In conclusion, So-Wol intended to include not only eternal nature but also substantiality on modern poetry with LiKi(理氣) philosophy.

인터뷰 - 김지혜 롯데칠성음료(주) 디자인팀 디자이너

김지혜,Kim, Ji-Hye (사)한국포장협회 2010 包裝界 Vol.210 No.-

지식경제부와 한국디자인진흥원은 대한민국 디자인 산업을 이끌어갈 우수한 신예 디자이너 발굴의 장이자, 국내 산업 디자인의 미래를 조망하는 "대한민국디자인전람회" 수상작을 발표했다. 대한민국 디자인계를 이끄는 학계 산업계의 초대 추천 디자이너 542명을 배출한 이 전람회는 1995년부터 집계된 출품 수만 2만5천여 점에 달하는 국내 최대 최고 규모의 공모전이다. 이번 전람회에서는 롯데칠성 디자인팀의 김지혜 씨가 바쁜 현대인들에게 안전하고 건강한 생활 식습관을 제안한 "요리하는 즐거움, 건강한 라이프스타일을 위한 패키지디자인연구"로 국무총리상을 수상하게 됐다. 김지혜 디자이너에게 작품 소개 및 패키지디자인에 대한 견해를 들어보았다.

5 Nm³ /hr급 알카라인 수전해 시스템 안전기준 분석 및 안전성능 평가에 관한 연구

김지혜,이은경,김민우,오건우,이정운,김우섭,Kim, Ji-Hye,Lee, Eun-Kyung,Kim, Min-Woo,Oh, Gun-Woo,Lee, Jung-Woon,Kim, Woo-Seop 한국가스학회 2018 한국가스학회지 Vol.22 No.6

풍력에너지는 낮에 비해 야간에 많은 잉여전력을 발생시키기 때문에 야간에 생산되는 전력은 버려지고 있는데, 이 문제를 해결하기 위해 풍력 등 재생에너지를 연계한 수전해 하이브리드 시스템 개발이 활발히 이루어지고 있다. 본 연구에서는 하이브리드 시스템 안전성 향상을 위해 국내 외 수전해 시스템 기준의 평가항목을 분석하였고, 평가 항목을 토대로 수전해 시스템의 안전성능 시험항목을 도출하였다. $5Nm^3/hr$급 수전해 시스템의 안전성능 평가를 위하여 시험항목 중 효율측정시험, 수소발생압력시험, 수소 순도시험을 평가하였다. 그 결과 수소발생량은 $5.10Nm^3/hr$, 스택효율은 $4.97kWh/Nm^3$로 산출되었고, 이때 발생한 수소의 순도는 99.993%로 국제기준 ISO 14687, SAE J2719에 명시된 순도보다 높은 순도의 수소를 생산하였음을 확인할 수 있었다. 본 연구 결과는 향후 수전해 시스템의 구축과 안전성능을 평가에 도움이 될 것이라고 기대한다. The wind energy produced at night is being discarded because of the excess power generated at night compared to daytime. To solve this problem, In this study, we analyzed the evaluation contents for evaluation of domestic and overseas water electrolysis systems and drew contents for safety performance contents test of the water electrolysis system based on the evaluation contents. The test contents produced the efficiency measurement test, the hydrogen generated pressure test, and the hydrogen purity test. And the safety performance evaluation of the alkaline water electrolysis system of $5Nm^3/hr$ was performed based on the results. As a result, the hydrogen generation was calculated as $5.10Nm^3/hr$ and the stack efficiency was $4.97kWh/Nm^3$. The purity of the hydrogen generated was 99.993% and it was confirmed that it produced high purity hydrogen. I think will help us assess and build safety performance of water electrolysis systems in the future.

진단방사선 일반촬영에서의 X-ray Beam Collimator 사용 전국 실태조사

김지혜,성동욱,김정욱,신진호,이순근,정경일,엄종권,이기남,성호진,김윤현,김혁주,Kim, Jee Hye,Sung, Dong-Wook,Kim, Jeong Wook,Shin, Jin Ho,Lee, Soon Keun,Jung, Kyung Il,Uhm, Jong Kwan,Lee, Ki Nam,Seong, Ho Jin,Kim, Youn Hyun,Kim, Hyeog J 한국의학물리학회 2013 의학물리 Vol.24 No.2

방사선 검사에서 CR, DR의 도입으로 인해 X-선속 조사야의 사용이 경시되고 있는 실정이다. 일반방사선 검사에서 검사 부위별 조사야를 적절히 사용하고 있는지에 대해 현장 실태 조사와 설문 조사하고, 조사야의 기준의 필요성을 강조하며 표준 조사야를 제시하고자 한다. 서울, 경기도, 전라도, 충청도, 강원도, 부산 지역 총 333개 의료기관을 대상으로 X-선속 조사야의 사용 실태를 현장 조사하여, 검사부위별, 의료기관종별, 영상종류별로 조사야 조절의 사용 여부를 분석하였다. 또한 조사야 조절이 방사선피폭에 미치는 영향과 인식을 평가하기 위해 종합병원 10곳, 병원 10곳, 의원 10곳의 일반촬영실에 근무하는 168명의 방사선사를 대상으로 X-선속 조사야 조절이 환자피폭선량 저감화에 끼치는 영향에 대한 인식, 조사야 조절 방법과 실제 사용하고 있는 검사부위별 X-선속 조사야 크기를 설문 조사하였다. 검사부위별 적합한 조사야을 사용하고 있는 의료기관은 61.3%이었으나, 주요 장기가 밀집된 요추 검사의 경우에는 적합한 사용이 49.9%에 불과하였다. 의료기관종별에서는 종합병원이 약 69%, 영상종류별로 보면 DR을 사용하는 병원의 65.0%에서 적합한 조사야을 사용하였다. 설문 조사에서는 응답자의 97.6%가 조사야 조절이 환자에게 끼치는 선량을 줄일 수 있다고 인식하고 있었으나, 실제로 부위별 X-선속 조사야의 크기를 조절하여 검사하는 경우는 83.3%이었다. 일반방사선 검사에서 적절한 조사야를 사용하는 경우가 실태조사를 통해 낮게 나타났으며 이는 환자에 대한 방사선 피폭선량을 줄이기 위한 노력이 시급히 필요하며, 조사야에 대한 통일된 표준 규격이 필요하여 철저한 교육이 동반되어야 한다. Due to the introduction of CR and DR, it has been neglected the use of the X-ray beam collimator and field size. This study examines nationwide survey of the proper use of collimator and field size by area in a specific field of plain radiography and the current status. Authors emphasized the need for the field size criteria, and propose a standard reference field size in each specific radiologic examination. Total 333 medical institutions (included in Seoul, Gyeonggi-do, Jeolla, Chungcheong, Gangwon-do, Busan area), were investigated in relation to the status of the X-ray beam collimation field size, type specific inspection areas, medical facilities, and image analyses by type to figure out whether they use the adjustment of image field to the specific examination. To assess the awareness and the impact of radiation exposure to the collimation adjustable, 168 radiographers who was working in 10 general hospitals, 10 hospitals, and 10 clinics, were surveyed how they haver adjusted the actual field size. We examine that 61.3% of medical institutions used the "Proper collimation" and only 49.9% of them employed proper one in lumbar spine densely crowded by major organs. 69% among general hospitals, and 65% among hospitals using DR system were using proper collimation. Radiographers recognized that proper adjustment of collimation could reduce the harmful radiation dose on patients. In the survey, 97.6% of respondents were aware of this fact, but only 83.3% of respondents did the adjustment of the size of the collimation field. The using of proper collimation field was low in the nationwide survey, so the effort to reduce the radiation dose on the patients is urgently needed. A unified standard for the field accompanied by thorough education should be needed.

WC-Co 초경합금(超硬合金) 슬러지로부터 왕수처리(王水處理)를 이용한 텅스텐의 회수(回收)

김지혜,김은영,김원백,김병수,이재천,신재수,Kim, Ji-Hye,Kim, Eun-Young,Kim, Won-Back,Kim, Byung-Su,Lee, Jae-Chun,Shin, Jae-Soo 한국자원리싸이클링학회 2010 資源 리싸이클링 Vol.19 No.4

A fundamental study was carried out to develop a process for recycling tungsten and cobalt from WC-Co hardmetal sludge generated in the manufacturing process of hardmetal tools. The complete extraction of cobalt and simultaneous formation of tungstic was achieved by treating the sludge using aqua regia. The effect of aqua regia concentration, reaction temperature and time, pulp density on cobalt leaching and tungstic acid formation was investigated. The complete leaching of cobalt was attained at the optimum conditions: 100 vol.% aqua regia concentration, $100^{\circ}C$ temperature, 60 min. reaction time and 400 g/L pulp density. A complete conversion of tungsten carbide of the sludge to tungstic acid was however, obtained at the pulp densities lower than 150 g/L under the above condition. The progress of reaction during the aqua regia treatment of the sludge was monitored through the XRD phase identification of the residue. The metallic impurities in the tungstic acid so produced could be further removed as insoluble residues by dissolving the tungsten values in ammonia solution. The ammonium paratungstate($(NH_4)_{10}{\cdot}H_2W_{12}O_{42}{\cdot}4H_2O$) of 99.85% purity was prepared from the ammonium polytungstate solution by the evaporation crystallization method. 초경공구의 제조공정에서 발생하는 WC-Co 초경합금 슬러지로부터 텅스텐의 순환활용을 위한 기초연구가 수행되었다. 왕수를 사용하여 슬러지로부터 코발트를 침출함과 동시에 탄화텅스텐을 텅스텐산으로 변환시켜 회수하였다. 왕수농도, 반응온도와 시간, 광액농도 등이 코발트의 침출과 텅스텐산의 생성에 미치는 영향을 조사하였으며 최적조건을 도출하였다. 왕수농도 100 vol.%, 반응온도 $100^{\circ}C$, 반응시간 60분에서슬러지의 광액농도가 400 g/L에 도달할 때 까지 슬러지로부터 코발트의 완전한 추출이 이루어졌으나, 슬러지에 존재하는 모든 탄화텅스텐이 텅스텐산으로 완전히 전환되는 것은 광액농도가 150 g/L 이하일 때 이었다. 생성된 텅스텐산을 암모니아 용액에 용해함으로서 금속 불순물들을 불용성 잔사로 제거하는 것이 가능하였다. 증발결정 공정을 통하여 정제된 암모늄 텅스테이트 용액으로부터 99.85%의 순도를 가지는 암모늄 파라텅스테이트($(NH_4)_{10}{\cdot}H_2W_{12}O_{42}{\cdot}4H_2O$)를 얻을 수 있었다.

포도 수확 작업의 작업특성에 따른 손목과 팔꿈치 각도 영향 분석

김지혜,이인석,Kim, Jihye,Lee, Inseok 대한인간공학회 2017 大韓人間工學會誌 Vol.36 No.5

Objective: The objective of this study was to measure the upper-limb motions and postures of grapes-harvesting tasks using electrical goniometers and analyze the upper-limb motions in a kinematic way to assess the risk of musculoskeletal disorders. Background: Grapes farmers are exposed to various risk factors of musculoskeletal disorders (MSDs) such as repetitive upper-limb motions, non-neutral postures, and manual handling of heavy items. The farmers have to use scissors repetitively while harvesting grapes with their being arms elevated over the shoulder height, which presumed to increase the physical workload. It has been reported that the grapes farmers feel the harvesting task as the one of the hardest work in cultivating grapes. We tried measure the wrist and elbow angles while the farmers were carrying out harvesting tasks to understand how much workload the work impose on the farmers, which can be helpful in making interventions of preventing musculosksletal disorders among grapes farmers. Method: We measured joint angles at the right wrist and elbow with a wireless measuring system with two electrical goniometers from five grape farmers. The grapes-harvesting task was classified into 6 different subtasks: 1) searching, 2) picking, 3) cleaning, 4) carrying, 6) storing, and 7) miscellaneous tasks. The subtasks were compared by mean angles, 10%, 50%, and 90% APDF values of wrist flexion/extension, ulnar/radial deviation, and elbow flexion. Results: The Kruskal-Wallis tests showed that the 10th percentiles of APDF of ulnar/radial deviation and flexion/extension of the wrist significantly differs among subtasks (p<0.05). It was found that the farmers assumed more deviated wrist postures in the ulnar direction when they picking and adjusting the grapes. The use of scissors seemed to force the farmers to severely bend their wrist in the directions of ulnar deviation and flexion. The grapes-harvesting task showed similar wrist postures and motion with poultry deboning and milking tasks. Conclusion: The grapes harvesting tasks make the farmers take ulnar deviated and extended postures in the wrist. The use of scissors makes them take more severely deviated postures in the wrist. Safety guidelines including use of ergonomic scissors can be provided to the farmers to improve their work conditions. Application: The results of this study can be used as a basic data for the development of safety guidelines for agricultural work.

공공데이터 개방 평가지표 개발을 통한 현황분석 및 가시화

김지혜,조상우,이경희,조완섭,Kim, Ji-Hye,Cho, Sang-Woo,Lee, Kyung-hee,Cho, Wan-Sup 한국빅데이터학회 2016 한국빅데이터학회 학회지 Vol.1 No.1

Data of central government and local government was collected automatically from the public data portal. And we did the multidimensional analysis based on various perspective like file format and present condition of public data. To complete this work, we constructed Data Warehouse based on the other countries' evaluation index case. Finally, the result from service level evaluation by using multidimensional analysis was used to display each area, establishment, fields. 공공데이터 포털에 공개된 지자체 데이터와 공공기관 데이터를 자동으로 수집한 후, 공공 데이터의 개방현황 및 다양한 영역별 데이터 제공여부, 파일 형식 등 다양한 기준으로 다차원 분석하여 서비스 수준 평가를 제공하고자 한다. 이를 위해, 해외 평가지표 사례를 바탕으로 평가지표 내용을 설정한 후 이를 기준으로 데이터웨어하우스(DW)를 구축하였으며, 다차원 분석 기법을 사용한 서비스 수준평가 결과를 지역별로, 기관별로, 분야별로 시각화한다.

타이타늄 표면 코팅 처리에 따른 타이타늄도재관의 파절강도 비교

김지혜,박상원,방몽숙,양홍서,박하옥,임현필,오계정,김현승,이광민,이경구,Kim, Ji-Hye,Park, Sang-Won,Vang, Mong-Sook,Yang, Hong-So,Park, Ha-Ok,Lim, Hyun-Pil,Oh, Gye-Jeong,Kim, Hyun-Seung,Lee, Kwang-Min,Lee, Kyung-Ku 대한치과보철학회 2007 대한치과보철학회지 Vol.45 No.2

Statement of problem: Titanium and its alloy, with their excellent bio-compatibility and above average resistance to corrosion, have been widely used in the field of dentistry. However, the excessive oxidization of titanium which occurs during the process of firing on porcelain makes the bonding of titanium and porcelain more difficult than that of the conventional metal-porcelain bonding. To solve this problem related to titanium-porcelain bonding, several methods which modify the surfaces, coat the surfaces of titanium with various pure metals and ceramics, to enable the porcelain adhesive by limiting the diffusion of oxygen and forming the adhesive oxides surfaces, have been investigated. Purpose: The purpose of this study was to know whether the titanium-porcelain bonding strength could be enhanced by treating the titanium surface with gold and TiN followed by fabrication of clinically applicable porcelain-fused-to-titanium crown Material and method: The porcelain-fused-to-titanium crown was fabricated after sandblasting the surface of the casting titanium coping with $Al_2O_3$ and treating the surface with gold and TiN coating followed by condensation and firing of ultra-low fusing porcelain. To compare with porcelain-fused-to-titanium crowns, porcelain-fused-to-gold crowns were fabricated and used as control groups. The bonding strengths of porcelain-fused-to-gold crowns and porcelain-fused-totitanium crowns were set for comparison when the porcelain was fractured on purpose to get the experimental value of fracture strength. Then, the surface were examined by SEM and each fracturing pattern were compared with each other Result:Those results are as follows. 1. The highest value of fracture strength of porcelain-fused-to-titanium crowns was in the order of group with gold coating, group with TiN coating, group with $Al_2O_3$ sandblasting. No statistically significant difference was found among the three (P>.05). 2. The porcelain-fused-to-gold crowns showed the highest value in bonding strength. The bonding strength of crowns porcelain-fused-to-titanium crowns of rest groups showed bonding strength reaching only 85%-94% of that of PFG, though simple comparision seemed unacceptable due to the difference in materials used. 3. The fracturing patterns between metal and porcelain showed mixed type of failure behavior including cohesive failure and adhesive failure as a similar patterns by examination with the naked eye and SEM. But porcelain-fused-to-gold crowns showed high incidence of adhesive failure and porcelain-fused-to-titanium crowns showed high incidence of cohesive failure. Conclusion: Above results proved that when fabricating porcelain-fused-to-titanium crowns, treating casting titanium surface with gold or TiN was able to enhance the bonding strength between titanium and porcelain. Mean value of masticatory force was found to showed clinically acceptable values in porcelain bonding strength in all three groups. However, more experimental studies and evaluations should be done in order to get better porcelain bonding strength and various surface coating methods that can be applied on titanium surface with ease.

만성 소화불량증 환자에서 설 색상과 심박변이도의 경향성 파악

김지혜,정창진,김근호,Kim, Ji-hye,Jeong, Chang-jin,Kim, Keun-ho 대한한방내과학회 2015 大韓韓方內科學會誌 Vol.36 No.3

Objectives From observing the tongue of a patient, one can assess the health status; this method has been frequently used in traditional Korean Medicine (KM) clinics. In particular, KM posits that the color of the tongue is highly related to digestive functions. In this study, the color of tongue and heart rate variability (HRV) were compared between chronic dyspepsia (CD) patients and healthy subjects. Methods Healthy subjects and CD patients with functional dyspepsia (FD), gastroesophageal reflux disease (GERD), or chronic gastritis (CG) were enrolled for the study. Profile view images of the tongue were acquired by using a computerized tongue image acquisition system (CTIS). The color of the tongue body was extracted from the non-coated region on the tongue images. Results Color differences in CIE L*a*b* color space between the three sub-types of CD patients and healthy subjects were analyzed by using multiple linear regression analysis with age and sex as the factors. The variable b* was significantly lower in GERD patients than in the controls (p=0.017). Variable a* was significantly lower in CG than in the controls (p=0.03). No significant difference was seen between FD and controls. In GERD, the tongue body seems to be intense red in color; in CG, pale red. Frequency domain analysis showed that HF was significantly lower in GERD patients than in the controls (p=0.041). Conclusions The color of the tongue body and HF of HRV can be used for diagnosing digestive functions in health care.

임플란트 길이, 직경 및 식립 위치에 따른 임플란트 안정성에 관한 후향적 연구

김지혜,전진용,허유리,손미경,Kim, Ji-Hye,Jeon, Jin-Yong,Heo, Yu-Ri,Son, Mee-Kyoung 대한치과보철학회 2013 대한치과보철학회지 Vol.51 No.4

연구 목적: 이 연구는 임플란트 직경, 길이 및 식립 부위가 임플란트의 안정성에 미치는 영향을 후향적 평가를 통해 비교, 분석하고자 하였다. 연구 대상 및 방법: 72명의 환자에게 식립된 총 90개의 임플란트(US II plus$^{TM}$, Osstem co, Busan, Korea)를 대상으로 임플란트 식립 직후와 인상 채득 당시에 공진주파수분석법(RFA)으로 임플란트 안정성 지수(ISQ)가 측정되었다. 상 하악에 식립된 직경은 4 mm와 5 mm이고 길이는 10 mm, 11.5 mm, 13 mm인 임플란트가 실험대상으로 선택되었다. 측정된 ISQ 값의 평균과 표준편차를 구하고 우선적으로 성별에 따른 차이를 확인하기 위하여 Independent t-test를 시행하였다. 임플란트 직경, 길이, 식립부위에 따른 ISQ 값의 실험군간 차이는 One-way ANOVA를 이용해 분석하였고, 사후검정을 위해 Tukey HSD test가 사용되었다. 임플란트 식립시와 인상채득시의 차이는 paired t-test로 분석하였다. 결과:인상채득시가 임플란트 식립 직후보다 임플란트 안정성의 증가가 관찰되었다. 임플란트 길이가 증가할수록 ISQ 값은 증가하였으나 통계적으로 유의적인 차이를 보이지 않았다. 직경 5 mm 임플란트는 4 mm 임플란트 보다 유의성 있게 높은 ISQ 값을 보였다(P<.05). 하악에 식립된 임플란트가 상악보다 더 높은 ISQ값을 보였다(P<.05). 결론:본연구결과, 임플란트 안정성을 높이기 위해서는 직경이 큰 임플란트를 사용하는 것이 효과적임을 알 수 있었다. 또한, 상악보다는 하악에서 더 높은 임플란트 안정성이 확인되었다. 임플란트 식립 직후의 일차 안정성보다 골유착 후 이차 안정성이 더 높게 나타남으로서 RFA를 이용한 방법이 골유착을 통한 임플란트 안정성의 변화를 평가함에 있어 임상적으로 유용한 것으로 판단된다. 임플란트 안정성 평가와 이에 영향을 주는 요소들에 대한 고려는 임플란트 하중 시기를 결정하고 임플란트 성공률을 증가시키는데 도움이 될 것이다. Purpose: The aim of this retrospective study was to evaluate the influence of implant diameter, length and placement to implant stability. Materials and methods: Total 90 implants (US II plus$^{TM}$, Osstem co, Busan, Korea) of 72 patients were determined as experimental samples. The factors of diameters(${\phi}$ 4 mm, ${\phi}$ 5 mm), lengths (10 mm, 11.5 mm, 13 mm), and implant placement (maxilla, mandible) were analyzed. The stability of the implants was measured by resonance frequency analysis (RFA) at the time of implant placement and impression taking. The difference of ISQ values according to patient's gender was evaluated by Independent t-test. ISQ values were compared between implant diameter, length and placement using one-way ANOVA and Tukey HSD test (${\alpha}=.05$). To compare ISQ values between at the time of surgery and impression taking, paired t-tests were used (${\alpha}=.05$). Results: The change of implant length did not show significant different on the ISQ value (P>.05). However, 5 mm diameter implants had higher ISQ values than 4 mm diameter implants (P<.05). Implants placed on the mandible showed significantly higher ISQ values than on the maxilla (P<.05). Conclusion: In order to increase implant stability, it is better to select the wider implant, and implants placed on mandible are possible to get higher stability than maxilla. ISQ values at impression taking showed higher implant stability than ISQ values at implant placement, it means that RFA is clinically effective method to evaluate the change of implant stability through the osseointegration. The consideration of the factors which may affect to the implant stability will help to determine the time of load applying and increase the implant success rate.