http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최대 전선의 길이를 최소화하기 위한 모듈방향 결정에 관한 휴리스틱
김재범(JaeBum Kim),정균락(KyunRak Chong) 한국정보과학회 1994 한국정보과학회 학술발표논문집 Vol.21 No.2A
VLSI 설계중에 모듈들의 위치가 결정된 후, 모듈들을 횡축 또는 종축을 중심으로 뒤집어서 회로의 효율성과 연결성을 향상시킬 수 있다. 속도가 빨라야 하는 고성능 회로에서는 가장 긴 선의 길이가 최소가 되게 각 모듈들의 방향을 결정하는 것이 바람직하고, 그렇지 않은 경우에는 전체 선의 길이의 합을 최소화하는 것이 바람직하다. 가장 긴 선의 길이가 최소가 되도록 모듈의 방향을 결정하는 문제는 NP hard임이 증명되었으나, 이에 대한 휴리스틱은 아직 개발되지 않았다. 본 논문에서는 이 문제에 대한 효율적인 휴리스틱으로, 반복 개선법, 시뮬레이티드 어닐링, 제한적 최적 알고리즘을 구현하여 비교 분석하였다.
김재범(Jaebum Kim),권덕렬(Duk-Ryel Kwon),오기영(Ki-Young Oh),이종무(Chongmu Lee) 한국진공학회(ASCT) 2002 Applied Science and Convergence Technology Vol.11 No.3
지금까지 주로 사용해 오던 TMA(trimethylaluminum, Al(CH₃)₃)와 H₂O를 사용하여 ALD(Atomic Layer Deposition)법으로 증착시킨 Al₂O₃막내의 OH^-기는 Al₂O₃의 우수한 물성을 악화시키는 불순물 역할을 하므로, 이를 개선하기 위하여 본 연구에서는 TMA 와 오존(ozone, O₃)을 이용하여 Al₂O₃막을 증착한 후, 산화제 소스로 H₂O와 O₃을 각각 사용했을 때 그것들이 Al₂O₃막의 유전적 특성에 끼치는 효과에 관하여 비교 조사하였다. XPS 분석결과 O₃를 사용한 Al₂O₃막은 H₂O를 사용할 때와는 다르게 OH^-기가 감소됨을 관찰할 수 있었다. 화학적 안정성(chemical inertness)의 척도가 되는 wet 에칭율 또한 O₃를 사용한 Al₂O₃막의 경우가 더욱 우수하게 나타났다. TiN을 상부전극으로 한 MIS (metal-insulator-silicon) capacitor 구조로 제작된 Al₂O₃막의 경우 H₂O를 사용한 경우 보다 O₃를 사용한 경우에 누설전류밀도가 더 낮았고, 절연특성이 더 우수하였으며, H₂O보다 O₃를 사용했을 때 C-V 전기적이력(hystersis) 곡선의 편차(deviation)가 감소하는 것으로 보아 전기적특성이 더 향상되었음을 알 수 있었다. In the present study Al₂O₃ films were deposited by the ALD technique using trimethylaluminum(TMA) and ozone to improve the quality of the Al₂O₃ films, since the OH^- radicals existing in the Al₂O₃ films deposited using TMA and H₂O degrade the physical and the dielectric properties of the Al₂O₃ film. The XPS analysis results indicate that the OH^- radical concentration in the Al₂O₃ film deposited using O₃ is lower than that using H₂O. The etch rate of the Al₂O₃ film deposited using O₃ is also lower than that using H₂O, suggesting that the chemical inertness of the former is better than the latter. The MIS capacitor fabricated with the TiN conductor and the Al₂O₃ dielectrics formed using O₃ offers lower leakage current, better insulating property and smaller flat band voltage shift (?VFB).
김재범 ( Jaebum Kim ),이상목 ( Sang Mok Lee ),조인성 ( In Sung Cho ),이승재 ( Seung Jae Lee ),박성혁 ( Sung Hyuk Park ) 한국수처리학회(구 한국수처리기술연구회) 2018 한국수처리학회지 Vol.26 No.3
The purpose of this study is to examine the effects of manufacturing industry upon the water industry and to propose ways to foster the water industry through fusion with the ppuri industry. Ppuri industry is the basic process industry that produces parts or finished products by casting, molding, welding, metal forming, surface treatment, and heat treatment. The manufacturing industry still plays an important role for driving economic growth, and the developed countries such as United States, Germany, and Japan are pursuing policies of re-manufacturing. In the water industry, we are looking for growth engines in manufacturing industries for key parts, materials, and equipment. The growth of the parts and materials market is expected to be most prominent. In this article, we examined the reality of manufacturing industry in Korea and the effects of manufacturing on the economy, and investigated the convergence with the ppuri industry for the upbringing of the water industry. Based on these efforts, it is expected to revitalize water industry and strengthen its competitiveness.