http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
제4차 산업혁명시대의 벤처기업 성과 측정 연구: 소프트웨어 벤처 기업의 효율성 측정을 중심으로
김영준 ( Yeongjun Kim ),김창희 ( Changhee Kim ) 한국중소기업학회 2019 기업가정신과 벤처연구 Vol.22 No.3
본 연구에서는 벤처 기업 효율성 분석에 대한 기존 문헌 연구를 통해 소프트웨어 벤처기업에 유미한 변수들을 선정하여 해당 업태 기업들의 효율성을 분석하였다. 또한 소프트웨어 벤처 기업의 매출 구조가 해당 업태 기업들의 효율성에 미치는 영향을 분석하였으며, 해당업태의 경쟁력 요소별 수준에 따라 효율성 분포를 비교·분석하였다. 효율성 분석 결과, 투입지향 CCR에서 5개, 투입지향 BCC에서는 13개의 업체가 가장 효율적인 업체로 나타났으며. IRS, DRS 등 규모수익에 따른 효율성 개선 방안 또한 제시하였다. 토빗 회귀 분석 결과, 유의수준 .05 하에서 대기업에 납품하는 1, 2차 벤더만이 유의하지 않았으며, 유의수준과 계수를 고려할 경우, 소프트웨어 벤처 기업은 B2C 거래처의 비중이 높은 것이 상대적 효율성을 달성하는데 유리함을 알 수 있었다. 크루스칼 왈리스 일원배치 분산분석 결과. 6가지의 경쟁력 요소 중 품질 경쟁력과 마케팅 경쟁력이 유의수준 .05 하에서 귀무가설을 기각시킴에 두 경쟁력의 효율성 분포가 다름을 알 수 있었다. 또한 분포의 양극화 현상에 따라 매우 높은 수준의 품질경쟁력이나 마케팅 경쟁력을 갖추지 못 한 기업은 비용절감을 통해 효율성을 제고하는 것이 유리함을 알 수 있었다. In this study, We analyzed the efficiency of software venture firms and the impact of the sales structure on the efficiency of the business. We also analyzed efficiency distribution according to the level of competitiveness element of the business. According to efficiency analysis, five firms in the input-oriented CCR and 13 firms in the input- oriented BCC were the most efficient. According to Tobit regression, only primary and secondary vendors who deliver to large enterprises under significant levels of .05 were not significant, and software venture firms had the advantage of having B2C client when considering significant levels and coefficients. According to efficiency distribution comparison, the null hypotheses of quality competitiveness and marketing competitiveness were rejected. It was shown that firms that do not have very high quality competitiveness or marketing competitiveness have found it advantageous to increase efficiency through cost reduction.
김영준(Yeongjun Kim),김창희(Changhee Kim) 한국SCM학회 2019 한국SCM학회지 Vol.19 No.1
This study estimates the innovation efficiency of information service industries using data envelopment analysis. For the input oriented BCC DEA analysis, I use the number of employees and innovation expenses as input factors and total sales as an output factor. And Kruskal Wallis one-way ANOVA has used to find differences between efficiency distributions by the R&D operation type. In the results of this study, the results show polarization of innovation efficiency score. And it is better to operate R&D center as needed than operate own research laboratories.
3D 프린팅 시스템을 활용한 전도성 패턴 제작 및 특성평가
김영준(Yeongjun Kim),오제훈(Je Hoon Oh),강병주(Byung Ju Kang),이준희(Junhee Lee),이창우(Changwoo Lee) 대한기계학회 2016 대한기계학회 춘추학술대회 Vol.2016 No.12
The purpose of this study is to establish a 3D printing system and fabricate a conductive pattern by using this system. In this paper, at first, we conducted a simulation to define the required power of a heater. From the result, we established a 3D printing system. Using wire solder, we fabricated conductive patterns on polyimide(PI) and glass substrate with different stage speed and distance from the nozzle and substrate. With the stage speed of 100mm/s, pattern widths of 290μm and 270μm were obtained on PI and glass substrate, respectively.
용적계량식 프린팅 시스템을 활용한 금속 3차원 구조물 제작
김영준(Yeongjun Kim),오제훈(Je Hoon Oh),이준희(Junhee Lee),이창우(Changwoo Lee) 대한기계학회 2017 대한기계학회 춘추학술대회 Vol.2017 No.11
The purpose of this study is to investigate the effect of stage speed and flow rate (piston speed) to fabricate uniform 2-dimensional patterns by using two different solder wires (Sn60Pb and lead free solder). From the results, we obtained combinations of proper stage speed and piston speed which is shown as contours. Regions of contours are divided bulge, uniform line and dashed pattern. Line widths of printed uniform lines and dashed patterns are also investigated. In addition, 3-dimensional structure was successfully fabricated with the stage speed of 30 mm/s and the piston speed of 0.05 mm/s when Sn60Pb was used.