이갈이 진단 및 조절용 구내장치의 개발과 신뢰도 조사

김성원,김미은,김기석,Kim, Seung-Won,Kim, Mee-Eun,Kim, Ki-Suk 대한안면통증구강내과학회 2005 Journal of Oral Medicine and Pain Vol.30 No.1

The purposes of this study were to develop and introduce a novel intraoral appliance for bruxism composed of power switch and biofeedback device and further to examine inter- and intra-reliability of the appliance prior to clinical tests. The newly-developed appliance consisted of detection sensors, a central processing unit (CPU), a reactor and a storage unit and a displayer. Compact-sized, waterproof switches were selected as bruxism detection sensor and any sensor activation by clenching or grinding event was processed at the CPU and transmitted, by radio wave, to the reactor and storage unit and triggered auditory or vibratory signal, subsequently producing biofeedback to the patient with bruxism. The data on bruxing event in the storage unit can be displayed on the computer, making it possible analyzing frequency, duration and nature of bruxism. Cast models were obtained from ten volunteers with normal occlusion to evaluate reliability of the appliances. For inter-operator reliability on the intraoral appliances, each operator of the two fabricated the appliance for the same subject and compared the minimal contact forces provoking auditory biofeedback reaction in vertical, lateral and central directions. Intra-operator reliability was also investigated on the appliances made by a single operator at two separate times with an interval of two days. Conclusively, the newly-developed appliance is compact and safe to use in oral circumstance and easy to make. Furthermore, it had to be proven reliability excellent enough to apply in clinical settings. Thus, it is assumed that this appliance with the processor and the storage of data and auditory or vibratory biofeedback function is available and useful to analyze and control bruxism.

수업 지도안 분석을 통한 예비 교사의 수업 전문성 변화

김성원(Seong-Won Kim),이소율(Soyul Yi),이영준(Youngjun Lee) 한국컴퓨터정보학회 2020 韓國컴퓨터情報學會論文誌 Vol.25 No.1

본 연구에서는 TPACK 교육을 통해 예비 교사의 수업 전문성 변화를 분석하였다. 이러한 연구를 위하여 예비 교사 20명을 대상으로 김성원과 이영준(2019)에서 개발한 프로그래밍 기반 TPACK 교육 프로그램을 적용하였다. 수업 전문성 분석을 위하여 예비 교사가 작성한 수업 지도안을 분석 틀을 활용하여 분석하였다. 연구 결과, 1차 수업 지도안에서 예비 교사는 테크놀로지 활용이 저조하며, 지식을 전달하거나 실험하는 수업을 설계하였다. 2차 수업 지도안에서는 테크놀로지 활용이 증가하였지만, 교육적 맥락에 따라 테크놀로지가 활용되지 않았다. 3차 수업 지도안에서 모든 예비 교사가 테크놀로지를 교육적 맥락에 따라 활용하는 것을 확인할 수 있었다. 또한, 예비 교사의 수업 전문성은 통계적으로 유의한 향상이 나타났다. This study analyzed the change of teaching expertise of pre-service teachers through TPACK education. In this study, we applied a programming-based TPACK education program developed by Kim and Lee (2019) to 20 prospective teachers. To analyze the pre-service teachers’ teaching expertise analyzed the lesson plan prepared before, during and after applying the educational program. As a result, Few teachers use technology in lesson plan, and the design of the instructor-led or experiment to confirmed content in curriculum or textbook. The use of technology has increased in the second Teaching Plan, but the technology was not used depending on the educational context. In the third lesson plan, all pre-service teachers were able to use technology in an educational context. Moreover, the teaching expertise of the pre-service teacher showed a statistically significant improvement in the lesson plan. This study founded that the programming-based TPACK education program was effective in enhancing the teaching expertise of the pre-service teacher.

나노인덴테이션으로 측정한 Ti(C_0.7N_0.3)-WC-Ni 써멧 구성상의 경도

김성원,김대민,강신후,김형준,김형태,Kim, Seong-Won,Kim, Dae-Min,Kang, Shin-Hoo,Kim, Hyeong-Jun,Kim, Hyung-Tae 한국세라믹학회 2009 한국세라믹학회지 Vol.46 No.1

The constituent phases in Ti($C_{0.7}N_{0.3}$)-xWC-20Ni (wt%, x=5, 15, 25) cermets were characterized using nanoindentation in conjunction with observation of microstructure. The microstructure of cermet is composed of hard phase and binder phase, which gave rise to a wide range of hardness distribution when nanoindentation was carried out on the polished surface of cermets. Because of the inhomogeneous nature of cermet microstructure, observation of indented surface was indispensable in order to separate the hardness of each constituent phase. The measured values of hardness using nanoindentation were ${\sim}14\;GPa$ for the binder phase and ${\sim}24$ to 28 GPa for the hard phase, of which nanoindentation hardness was decreased with the addition of WC into Ti($C_{0.7}N_{0.3}$)-Ni system. In addition, the nanoindentation hardness of Ni binder phase was much higher than reported Vickers hardness, which could result from confined deformation of binder phase due to the surrounding hard phase particles.

나노인덴테이션을 이용한 Ti(C_0.7N_0.3)-NbC-Ni 써멧 구성상의 경도평가

김성원,김대민,강신후,류성수,김형태,Kim, Seong-Won,Kim, Dae-Min,Kang, Shin-Hoo,Ryu, Sung-Soo,Kim, Hyung-Tae 한국분말야금학회 2008 한국분말재료학회지 (KPMI) Vol.15 No.6

The indentation technique has been one of the most commonly used techniques for the measurement of the mechanical properties of materials due to its experimental ease and speed. Recently, the scope of indentation has been enlarged down to the nanometer range through the development of instrumentations capable of continuously measuring load and displacement. In addition to testing hardness, the elastic modulus of submicron area could be measured from an indentation load-displacement (P-h) curve. In this study, the hardness values of the constituent phases in Ti($C_{0.7}N_{0.3}$)-NbC-Ni cermets were evaluated by nanoindentation. SEM observation of the indented surface was indispensable in order to separate the hardness of each constituent phase since the Ti($C_{0.7}N_{0.3}$)-based cermets have relatively inhomogeneous microstructure. The measured values of hardness using nanoindentation were ${\sim}20$ GPa for hard phase and ${\sim}10$ GPa for binder phase. The effect of NbC addition on hardness was not obvious in this work.

실리콘 나노선/다중벽 탄소나노튜브 Core-Shell나노복합체의 합성

김성원,이현주,김준희,손창식,김동환,Kim, Sung-Won,Lee, Hyun-Ju,Kim, Jun-Hee,Son, Chang-Sik,Kim, Dong-Hwan 한국재료학회 2010 한국재료학회지 Vol.20 No.1

Si nanowire/multiwalled carbon nanotube nanocomposite arrays were synthesized. Vertically aligned Si nanowire arrays were fabricated by Ag nanodendrite-assisted wet chemical etching of n-type wafers using $HF/AgNO_3$ solution. The composite structure was synthesized by formation of a sheath of carbon multilayers on a Si nanowire template surface through a thermal CVD process under various conditions. The results of Raman spectroscopy, scanning electron microscopy, and high resolution transmission electron microcopy demonstrate that the obtained nanocomposite has a Si nanowire core/carbon nanotube shell structure. The remarkable feature of the proposed method is that the vertically aligned Si nanowire was encapsulated with a multiwalled carbon nanotube without metal catalysts, which is important for nanodevice fabrication. It can be expected that the introduction of Si nanowires into multiwalled carbon nanotubes may significantly alter their electronic and mechanical properties, and may even result in some unexpected material properties. The proposed method possesses great potential for fabricating other semiconductor/CNT nanocomposites.

순환유동층내 loop - seal 을 갖는 고체재순환부의 특성

김성원,남궁원,김상돈 ( S . W . Kim,W . NamKung,S . D . Kim ) 한국화학공학회 1996 화학공학의이론과응용 Vol.2 No.2

신앙을 가진 어린이들이 코로나19 시기에 경험한 변화와 바람에 관한 질적연구

김성원,Kim, Sung Won 한국기독교교육학회 2021 기독교교육논총 Vol.- No.67

본 연구의 목적은 신앙을 가진 어린이들이 코로나19 시기에 경험한 변화와 바람에 관한 이야기를 탐색하여 교육적 방향을 제언하기 위함이다. 이러한 목적을 위해 코로나19 시기의 삶과 신앙생활에 대해 교회에 출석하는 초등학교 3-4학년 어린이 9명과 면담하였다. 분석 결과, 연구참여자 어린이들은 코로나19 시기에 일상의 변화, 학교생활의 변화, 대인관계의 변화, 신앙생활의 변화, 감정의 변화를 경험한 것으로 분석되었다. 일상의 변화에는 감염 예방을 위한 노력, 사라진 놀이, 여유로운 일상과 무기력함이, 그리고 학교생활의 변화에는 비대면 수업 실시와 다양한 규칙을 요구받음이 포함되었다. 친구·선생님·부모님·형제자매와의 어려움이 대인관계 변화에, 비대면 예배 실시와 가정예배 회복이 신앙생활의 변화에 포함되었다. 연구참여자들의 바람을 분석한 결과, 여행과 놀이의 회복을 포함하는 일상적 바람, 대면 예배로의 복귀·수련회의 회복·재미있는 프로그램 개발을 포함하는 신앙에 관한 바람, 그리고 코로나19 이전 학교생활로 복귀가 도출되었다, 이와 같은 어린이들의 경험과 바람을 토대로 본 연구는 교육자들이 코로나19 시기에 보여 준 어린이들의 노력을 인정하고 그들의 마음을 읽어주고 소통·공동체·즐거움의 요소가 포함된 교회 프로그램을 개발할 필요가 있음을 제안한다. The purpose of this study is to suggest educational directions by exploring the stories of changes and expectations experienced by Christian children during the COVID-19 pandemic. For this purpose, nine third- to fourth-grade elementary school children attending the church, were interviewed about their changes and expectations regarding COVID-19. The results identified five areas of experience: daily life changes, school life changes, interpersonal relationship changes, religious life changes, and emotional changes during the COVID-19 period. Daily changes included infection prevention, missing play, leisurely routine, and lethargy. Changes in school life included loss of face-to-face classes and various rule requirements. Interpersonal relationship changes included the difficulties in forming relationships with friends, teachers, parents, and siblings, and religious life changes included loss of face-to-face worship and the restoration of family worship. Various negative emotions were expressed. Analysis of the participants' expectations showed in daily life they wanted to travel and play, return to pre-corona school life, return to face-to-face worship, restore retreats, and develop fun programs as religious life expectations. Based on these children's experiences and wishes, the study suggests that educators need to recognize children's efforts during the COVID-19 period, read their hurt feelings, and develop church programs that include communication, community, and fun elements.

밀폐형 원심회전차의 내부유동장에 관한 실험적 연구-무충돌 유입 조건에서-

김성원,조강래,Kim, Seong-Won,Jo, Gang-Rae 대한기계학회 1996 大韓機械學會論文集B Vol.20 No.10

Flow patterns were measured in a shrouded centrifugal impeller. The flow rate in measurements was fixed at the value corresponding to a nearly zero incidence at the blade inlet. By using a single slanted hot-wire probe and a Kiel probe mounted on the impeller hub disk, the 3-D relative velocities and the rotary stagnation pressures were measured in seven circumferential planes from the inlet to the outlet of impeller rotating at 700 rpm, and the static pressure distribution along flow passage and the slip factor at impeller outlet were calculated from the measured values. From these measured data, the primary and secondary flows, the wake production and the static pressure rise in the impeller passage were investigated. Furthermore, the secondary flow patterns and the wake's location in this impeller passage were compared with those of the unshrouded impeller.

Fracture Properties of Carbon Coated LPS-SiC_f/SiC Composites

김성원,이문희,황승국,이상필,Kim, Sung-Won,Lee, Moon-Hee,Hwang, Seung-Kuk,Lee, Sang-Pill The Korean Society of Industry Convergence 2017 한국산업융합학회 논문집 Vol.20 No.2

Mechanical properties of carbon coated $SiC_f/SiC$ composites have been investigated, in conjunction with a detailed analysis of microstructure. Especially, the fracture behavior of $SiC_f/SiC$ composites by the induction of carbon coating layers has been examined. The matrix region of $SiC_f/SiC$ composites with ultra-fine SiC powders were consolidated by a liquid phase sintering (LPS) process, using a sintering additive of $Al_2O_3-Y_2O_3$ powder compound. In this composite, plain and satin- woven Tyranno SA fabrics were also utilized as a reinforcing material. A carbon interfacial layer was coated around satin-woven SiC fabrics. The characterization of LPS-$SiC_f/SiC$ composites was investigated by means of SEM and three point bending test.

멀티캐스트 학내 방송서비스 구현

김성원,Kim, Sung-Won 한국과학기술정보연구원 과학기술정보센터 2009 Journal of Information Science Theory and Practice Vol.40 No.2

Most of the colleges run their own broadcasting stations. They provide diverse types of content, and nowadays many colleges even provide video content. This paper deals with the concept of multicast service as a solution to provide efficient broadcasting service on the college campus. For this purpose, it examines concept and characteristics of the multicast service. It also reviews the actually case of such service provided by S college in Seoul, focusing on its platform, major functions, and scenario. I expect what's discussed in this paper contribute to effective implementing and operating of a college broadcasting service. Also, multicast service introduced in this paper is applicable to the various organizational environment such as private companies and institutions as well as colleges. 상당수 대학은 자체 방송국을 운용하고 있다. 방송의 내용도 다양해져 학내 영상서비스를 제공하는 대학도 다수에 이른다. 본 고에서는 이러한 환경을 반영하여 효율적인 학내 방송서비스를 제공하기 위한 솔루션으로 멀티캐스트 서비스의 구현문제를 다루었다. 이를 위해 멀티캐스트 서비스의 개념과 특징을 살펴보았다. 또한 서비스의 시나리오, 플랫폼, 주요 기능 등 구현된 서비스를 서울 소재 S대학의 사례를 중심으로 살펴보았다. 본 고에서 소개된 내용을 기반으로 하여 학내 효율적인 방송서비스를 구축, 운영하는 실무에 도움을 줄 수 있기를 기대한다. 본 고에서 소개된 멀티캐스트 서비스는 대학뿐아니라 일반 기업 및 협회 등 다양한 조직에서 활용될 수 있을 것으로 기대한다.