http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
SPECT/CT에서 인공고관절에 대한 감쇠보정지도(Attenuation Map)의 매개변수 변화에 따른 금속 인공물(Metal Artifact)의 영향 평가
김상규,김정열,박민수,조승현,임한상,김재삼,Kim, Sang Gyu,Kim, Jung Yul,Park, Min Soo,Jo, Seung Hyun,Lim, Han Sang,Kim, Jae Sam 대한핵의학기술학회 2014 핵의학 기술 Vol.18 No.2
CT를 기반으로 감쇠보정이 시행되는 SPECT/CT 검사에서는 금속 삽입물에 의한 선속경화현상으로 인접한 부위의 과대평가를 유발하며, 영상의 질을 저하시킨다. 이에 대해, 본 연구에서는 인공고관절이 삽입된 팬텀을 이용하여 감쇠보정지도의 매개변수 변화에 따른 금속 인공물이 SPECT/CT 영상에 미치는 영향을 알아보고자 한다. SPECT/CT 장비는 Siemens사의 Symbia T16을 사용하였다. SPECT/PET 팬텀에 인공고관절을 삽입하고, CT영상에서 Bright Streak 영역에 직경 17 mm의 구를 배후방사능 대비 8배가 되도록 Tc-99m을 채웠다. 이후 감쇠보정지도에서 Wide Beam Coefficient[수동모드(0.1~0.9), 자동모드]변화에 따른 열소와 배후방사능의 계수를 측정하였고, 고관절의 유무에 따라 Metal과 Non-Metal의 병소 대 배후방사능 비(Region to Background Ratio, RBR)를 산출 및 비교 분석하였다. 수동모드의 값이 증가할수록 Metal과 Non-Metal의 열소 계수는 증가하는 경향을 나타냈으며, 수동모드 0.4와 0.5에서 두 군과의 열소 계수비가 가장 일치하게 나타났다(수동모드 0.4=1.001, 0.5=0.999). 또한 $RBR^{Metal}$과 $RBR^{Non-Metal}$의 비는 자동모드에서 1.135이였고, 수동모드 0.4와 0.5에서 통계적으로 유의한 차이를 보이지 않았다(0.4=0.999, 0.5=1.028, p=0.78). 감쇠보정지도에서 Wide Beam Coefficient의 자동모드는 13.52% 과 보정 되는 것을 알 수 있었으며, 수동모드 중 0.4와 0.5에서 인공물에 의한 과 보정을 최소화 할 수 있었다. 이를 활용하여 환자에게 적용하기 위해서는 추가적인 연구가 이루어져야 할 것이며, 고관절전치환술 환자의 인공고관절 주변에서 금속 인공물에 의한 과 보정을 감소시켜 진단능을 향상시킬 수 있을 것으로 사료된다. Purpose SPECT/CT scan to be performed attenuation correction on the basis of CT induce an overestimation of the site due to the beam hardening artifact by metal cover and reduce the images quality. Therefore, this study using a phantom that has been inserted artificial hip joint investigated that effect on the SPECT/CT image causing by metal artifact for varying the parameters of the Attenuation Map. Materials and Methods Siemens Symbia T16 SPECT/CT equipment was used. Artificial hip joint was inserted to SPECT/PET phantom, 17 mm sphere of Bright Streak area in CT image was filled with Tc-99m so that the radiation activity was 8 times compared to background. And then Hot and Background was measured in varying Wide Beam Coefficient on Attenuation Map and RBR (Region to Background Ratio) of Metal and Non-Metal was calculated and analyzed depending on the presence or absence of the hip joint. Results It tended to hot count of Non-Metal and Metal to increase as the value of the manual mode is increased, hot count ratio with the group of both manual mode 0.5 and 0.4 is the best match. Also, in automatic mode, the ratio of RBRNon-Metal and RBRMetal was 1.135, statistically significant difference was not observed in the manual mode 0.5 and 0.4. Conclusion In the automatic mode of Wide Beam Coefficient in attenuation correction map, it was found that it is over-correction by 13.52%, it was possible to minimize the over-correction by the artifact in 0.5 and 0.4 of manual mode. Further studies should be performed in order to apply to a patient with the help of this and it is considered possible to reduce the over-correction by the metal artifact of an artificial hip joint for Hip-Resurfacing Arthroplasty patients, and to improve the diagnostic performance.
영단어 자동암기 학습 어플리케이션 서비스 모듈 개발에 관한 연구
김상규,최성윤,호정원,문송철,Kim, Sang-Gyu,Choi, Seong-Yoon,Ho, Jeong-Won,Moon, Song-Cheol 서비스사이언스학회 2011 서비스연구 Vol.1 No.1
본 연구에서는 Smart Phone에서 사용하는 영어학습용 어플리케이션으로서, 기존의 제품에 대비하여 음성지원 프로그램과 검색창 등을 제공하는 것으로 차별성을 두어, 보다 편리하고 실용적인 서비스 모듈을 스마트폰 운영체제인 안드로이드 기반에서 작동하는 앱으로서 개발하였다. 서비스 모듈 구현을 위해서 분석, 설계 및 구현과정을 거쳐서 작성된 문서 산출물과, 실제 구현 화면 등을 포함한 일부 코딩 내용을 제시하였다. 본 연구결과를 통해서 보다 효율적인 영어단어 암기 학습효과를 기대할 수 있다. In this research, we developed an practical service module as a application which operating on the smart phones based on the Android operating system. The service module supports on the voice processing function and inquiry windows also. After some documents and screens related on system analysis, service module are designed and implemented. The details about these modules are explained. We can expect to enhance the learning effects of english words memorizing competence for smart-phone users.
Trichothecium roseum에 의한 해바라기 분홍빛썩음병 발생 보고
김상규,허온숙,성정숙,고호철,이주희,백형진,류경열,Kim, Sang Gyu,Hur, On-Sook,Sung, Jung Sook,Ko, Ho-Cheol,Luitel, Binod Prasad,Rhee, Ju-Hee,Baek, Hyung-Jin,Ryu, Kyoung-Yul 한국식물병리학회 2017 식물병연구 Vol.23 No.2
Pink rot appeared in greenhouse-grown sunflower (Helianthus annuus L.) in Jeonju, Korea. The symptoms appeared as brown discoloration of sunflower head and progressed into stem in advanced stage. In order to investigate the causal organism of this disease, we isolated a fungus from the infected seeds and maintained the isolated fungal culture on potato dextrose agar medium. Conidiophores were simple or branched, 62.5 to $123.1{\mu}m$ long. Conidia were produced in basipetal chains, ellipsoidal to pyriform with oblique and prominent truncate basal scars, two-celled, hyaline and measured $10.2-21.4{\times}7.5-12.6{\mu}m$. The fungus was inoculated to a new sunflower plant and showed the typical blight on the leaves. Study of morphological characters, pathogenicity tests and sequence analysis revealed that the isolated fungus is confirmed to be Trichothecium roseum. To our knowledge, this is the first report of pink rot on sunflower caused by T. roseum in Korea. 해바라기 재배포장에서 화뢰 부분이 썩는 증상이 나타났다. 병징은 감염된 화뢰 부분이 갈변되어 줄기로 번져갔다. 감염된 화뢰의 종자에는 주황색의 포자덩어리를 관찰할 수 있었다. 병징으로부터 곰팡이를 순수 분리하여 감자 한천배지에 배양한 결과, conidiophores에 포자를 형성하여 흰색에서 분홍빛을 띠었다. Conidiophores는 단순형 또는 분지형으로 길이는 $62.5-123.1{\mu}m$였다. 분생포자는 무색의 격막이 없거나 하나 있는 둥근타원형에서 서양배 모양으로 크기는 $10.2-21.4{\times}7.5-12.6{\mu}m$였다. 이 균은 건전한 해바라기 잎에 접종하였을 때 잎에서 윤문형의 검은색 반점을 형성하였다. 균학적 특징, 병원성 검정, ITS 염기서열 분석 등의 결과를 바탕으로 Trichothecium roseum으로 동정되었으며 해바라기 분홍빛썩음병으로 명명하고자 한다.
알루미늄 첨가에 따른 오스테나이트계 Fe-23Mn-0.4C 고망간강의 극저온 충격 특성
김상규,김재윤,윤태희,황병철,Kim, Sang-Gyu,Kim, Jae-Yoon,Yun, Tae-Hee,Hwang, Byoungchul 한국재료학회 2021 한국재료학회지 Vol.31 No.9
The impact properties of two austenitic Fe-23Mn-0.4C steels with different Al contents for cryogenic applications are investigated in this study. The 4Al steel consists mostly of austenite single-phase microstructure, while the 5Al steel exhibits a two-phase microstructure of austenite and delta-ferrite with coarse and elongated grains. Charpy impact test results reveal that the 5Al steel with duplex phases of austenite and delta-ferrite exhibits a ductile-to-brittle transition behavior, while the 4Al steel with only single-phase austenite has higher absorbed energy over 100 J at -196 ℃. The SEM fractographs of Charpy impact specimens show that the 4Al steel has a ductile dimple fracture regardless of test temperature, whereas the 5Al steel fractured at -100 ℃ and -196 ℃ exhibits a mixed fracture mode of both ductile and brittle fractures. Additionally, quasi-cleavage fracture caused by crack propagation of delta-ferrite phase is found in some regions of the brittle fracture surface of the 5Al steel. Based on these results, the delta-ferrite phase hardly has a significant effect on absorbed energy at room-temperature, but it significantly deteriorates low-temperature toughness by acting as the main site of the propagation of brittle cracks at cryogenic-temperatures.