http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김병조,Qasim,Syed R,Verma,Rameshwar D 한국화학공학회 1971 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.9 No.3
The use of microstrainers in the water and wastewater engineering field is expected to increase in the future. Currently employed design methods for microstrainers are based on Boucher's straining law which assumes a constant rate of flow. The assumption of a constant pressure head is more appropriate than that of a constant flow rate. Governing equations describing the hydraulics of filtration through microstrainers based on these two assumptions are analyzed and compared.
내풍설계를 위한 인삼재배시설의 순압력계수분포에 관한 연구- 부분개방형과 폐쇄형을 중심으로 -
김병조,김효정,하영철 한국풍공학회 2014 한국풍공학회지 Vol.18 No.3
Ginseng is the half-heliophobus plant. Shading nets are constructed at side wall and on roof to prevent lightfrom sun. Strong wind and Typhoon are getting stronger and cause damages on many agricultural facilities. Especiallystrong wind affected on the shading nets of ginseng facilities connected to many bays and it causes the collapse ofstructural frames of ginseng facilities. To prevent these collapse, it is needed for wind resistant design to estimate andto endure wind loads on ginseng facilities. This study suggests net pressure coefficients of shading nets at side wallsand on roofs which are needed for estimating wind loads on custom type and back-post connection type of ginsengfacilities. Net pressure coefficients are investigated by wind tunnel tests. The results of this study are used for windresistant design of ginseng facilities. 인삼은 반음지성 식물로 해가림을 위해 지붕 및 벽에 해가림막 시설이 필요하다. 하지만 해마다 강해지는 강풍이나 태풍으로 인해 많은 농가시설물이 피해를 입고 있으며, 특히 인삼재배시설의 경우 시설물이 길게 하나로 연결되어 있어 피해가 크다. 이러한 피해를 방지하기 위해서는 인삼재배시설에 가해지는 풍하중을 평가하여 그것에 견딜 수있도록 내풍설계를 해야 한다. 이 연구에서는 관행식과 후주연결식 인삼재배시설의 구조골조에 대한 풍하중을 산정하기 위해 필요한 지붕 및 벽 해가림막의 순압력계수를 풍동실험을 통해 정량적으로 평가하였다. 이 연구결과는 인삼재배시설에 대한 내풍설계의 기초자료가 될 것이다.
김병조,하영철 한국풍공학회 2014 한국풍공학회지 Vol.18 No.2
고층 건축물의 내풍설계 시 다차모드 해석의 수행이 필요하다. 고층건축물의 다차모드 해석을 위해서 풍압적분법과 1차모드 해석을 수행하였으며, 풍압적분법을 활용하여 층별 시간이력 전도모멘트를 산출하였다. 층별 전도모멘트를 산출하기 위해 풍압적분법을 활용하였고, 그 방법으로 임의의 층까지의 누적 풍력데이터로부터 층별 시간이력의전도모멘트를 산출하였다. 풍응답변위는 각 층별 전도모멘트로부터 1차 모드 해석을 수행하여 평가하였다. 본 연구 결과의 그 유효성을 높이기 위해, 건축물 전체에 작용하는 풍력데이터에 의해 얻어진 풍응답 결과와 비교하였다. 두 연구 결과는 유사한 것으로 나타났다. When planning wind resistant design for tall buildings, multi-modal analysis is needed. In order to calculatethe wind load of multi-modal for tall buildings, Pressure Integral Method and first-modal analysis were used. The timehistory of overturning moments were calculated by using Pressure Integral Method. Overturning moments on eachstories were calculated by using cumulative wind force data of each stories. The wind response displacement wasestimated from overturning moments of each stories by using first-modal analysis. To increase the validity on the resultsof this study, it was compared with the results of wind response displacement which was estimated by wind force dataacting on a whole building. The results of those were similar.