윈드프로파일러 자료를 이용한 연안 지역 국지 바람장 모의

김민성,김광호,김박사,강동환,권병혁,Kim, Min-Seong,Kim, Kwang-Ho,Kim, Park-Sa,Kang, Dong-Hwan,Kwon, Byung Hyuk 해양환경안전학회 2016 海洋環境安全學會誌 Vol.22 No.2

본 연구에서는 3차원 바람장 생성을 위한 수치 모델의 상층기상 입력 자료로 윈드프로파일러 자료의 적용 가능성과 유용성을 조사했다. 10개 지점의 윈드프로파일러 자료와 기상 예측 모델 WRF의 결과를 기상진단 모델 CALMET에 입력하여 산출한 바람장을 8개 지역에서 관측된 라디오존데 자료와 통계적으로 비교 검증하였다. WRF 바람장 모의 결과를 CALMET에 적용하여 모의한 수평 풍속에 비해 1시간 간격의 윈드프로파일러 자료를 CALMET에 적용하여 모의한 수평 풍속이 평균 제곱근 오차 1.5 m/s 내에서 관측 결과와 일치하고 특히 연안 지역에서 해풍과 같은 국지적인 바람 변화를 잘 모의하였다. 풍향의 평균 제곱근 오차는 $50^{\circ}{\sim}70^{\circ}$로써 지형의 영향으로 오염된 윈드프로파일러의 풍향 오차에 기인한다. 윈드프로파일러 자료를 CALMET에 적용하면 대부분의 고도에서 상대적으로 정확한 바람을 신속하고 정확하게 모의할 수 있기 때문에 본 연구에서 제시하는 방법은 연안 지역의 기상뿐만 아니라 안전 환경 감시에 유용할 것으로 기대된다. In this paper, the applicability and usefulness of windprofiler input data were investigated to generate three dimensional wind field. A logical diagnostic model CALMET with windprofiler data at ten sites and with weather forecasting model WRF output was evaluated by statistically comparing with the radiosonde data at eight sites. The horizontal wind speed from CALMET simulated with hourly windprofiler data is in good agreement with radiosonde observations within 1.5 m/s of the root mean square error, especially local circulation of wind such as sea breeze over the coastal region. The root mean square error of wind direction ranged $50^{\circ}{\sim}70^{\circ}$ is due to the wind direction error from the windprofiler polluted by ground clutters. Since the exact wind can be produced quickly and accurately in most of the altitude with windprofiler data on CALMET, we expect the method presented in this study to be useful for the monitoring of safe environment as well as weather in the coastal zone.

오스테나이트계 스테인레스강(STS304) 앵글 볼트 접합부의 구조적 거동에 관한 실험적 연구

김민성,김태수,김승훈,이용택,Kim, Min-Seong,Kim, Tae-Soo,Kim, Seung-Hun,Lee, Yong-Taeg 한국강구조학회 2011 韓國鋼構造學會 論文集 Vol.23 No.1

강구조물에서 접합부의 구조적 거동을 파악하기 위해서 국내외에서 많은 이론과 실험을 통한 연구가 진행되고 있다. 특히, 국내에서는 탄소강 ㄱ형강의 블록전단파단과 전단지체현상 등에 대한 연구가 수행되어 왔다. 본 연구에서는 오스테나이트계 스테인레스강 앵글의 하중방향의 연단거리와 볼트배열(1행 1열,1행 2열)을 주요변수로 실험체를 계획하여, 앵글 볼트 접합부의 파단형태와 면외변형의 영향을 조사한다. 또한, 현행 기준식에 의한 예측결과와 실험결과의 파단양상과 최대내력을 비교하고 면외변형으로 인한 내력저하정도를 평가한다. With regard to steel construction, many studies have been performed to examine the structural behavior of the bolted connections domestically and in other countries. Especially, a domestic study was conducted on the block shear fracture and shear lag effect on the single-bolted angle connection in carbon steel. In this study, specimens were prepared with the end distance parallel to the loading direction and bolt arrangement ($1{\times}1$, $1{\times}2$), as the main variables. Then the fracture mode and the curling effect on the bolted angle connection in austenitic stainless steel were investigated. Moreover, the fracture mode and ultimate strength were compared, and the strength reduction by curling was estimated.

pH 나노센서로의 응용을 위한 UV-가교 P4VP 박막에 고정한 금 나노입자의 특성

김민성,정연태,Kim, Min-Sung,Jeong, Yeon-Tae 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.11

In this report, we describe the use of gold nanoparticles (AuNPs) immobilized on pH. responsive, cross-linked poly(4-vinylpyridine) (P4VP) thin films, as a potential application for pH nanosensors. The methodology is based on the variation in surface plasmon resonance of immobilized AuNPs with changing the interparticle distances, caused by the swelling/deswelling of the pH responsive P4VP polymer films. The change in optical properties of the immobilized AuNPs in response to the pH of surrounding media was investigated by a simple yet powerful tool; UV-vis absorption spectroscopy. The swelling of the P4VP chains at pH 2 causes an increase in the interparticle distances of immobilized AUNPS ($\sim20nm$) and hence leads to a blue shift of 48 nm in their surface plasmon resonance band peak. On the other hand, when the surrounding media was altered from pH 2 to 10, a red shift of absorption maxima was observed. The changes were rapid, and the effect was reversible. This system could prove to be useful in fabricating nanosensors for detecting the pH or pH changes of surrounding aqueous medium.

스폰지 복제법을 이용한 Ag 코팅 BCP 지지체의 제조 및 평가

김민성,김영희,송호연,민영기,이병택,Kim, Min-Sung,Kim, Young-Hee,Song, Ho-Yeon,Min, Young-Ki,Lee, Byong-Taek 한국재료학회 2010 한국재료학회지 Vol.20 No.8

As a starting material, BCP (biphasic calcium phosphate) nano powder was synthesized by a hydrothermal microwave-assisted process. A highly porous BCP scaffold was fabricated by the sponge replica method using 60 ppi (pore per inch) of polyurethane sponge. The BCP scaffold had interconnected pores ranging from $100\;{\mu}m$ to $1000\;{\mu}m$, which were similar to natural cancellous bone. To realize the antibacterial property, a microwave-assisted nano Ag spot coating process was used. The morphology and distribution of nano Ag particles were different depending on the coating conditions, such as concentration of the $AgNO_3$ solution, microwave irradiation times, etc. With an increased microwave irradiation time, the amount of coated nano Ag particles increased. The surface of the BCP scaffold was totally covered with nano Ag particles homogeneously at 20 seconds of microwave irradiation time when 0.6 g of $AgNO_3$ was used. With an increased amount of $AgNO_3$ and irradiation time, the size of the coated particles increased. Antibacterial activities of the solution extracted from the Ag-coated BCP scaffold were examined against gram-negative (Escherichia coli) and gram-positive bacteria (Staphylococcus aureus). When 0.6 g of $AgNO_3$ was used for coating the Ag-coated scaffold, it showed higher antibacterial activities than that of the Ag-coated scaffold using 0.8 g of $AgNO_3$.

손모양 인식기반의 경로교사와 장애물 인식이 가능한 자율보행 다족로봇 시스템

김민성,정우원,권배근,강동중,Kim, Min-Sung,Jeong, Woo-Won,Kwan, Bae-Guen,Kang, Dong-Joong 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.8

영상카메라와 무선통신 기능을 탑재한 손모양 및 장애물 인식이 가능한 다족 로봇을 독자적으로 설계 및 제작하고 제작한 로봇에 최적화된 보행패턴 알고리즘을 개발하여 적용하였다. 영상센서의 입력화상에 대해 하프변환 (Hough Transform)을 사용하여 물체의 외곽선을 추출하여 장애물을 인식하여 회피하는 실시간 자율보행이 가능한 알고리즘을 개발하였다. 로봇의 목표물 및 목적지 설정을 위하여 미리 학습시킨 피부색의 평균값과 입력영상의 확률거리(Mahalanobis Distance)를 산출하여 손 영역을 검출하고 손가락 개수에 따라 로봇의 명령 제어가 가능하도록 하였다. 장애물 및 손모양 인식에 따른 다족 자율 보행 로봇의 수행 실험 평균 결과 약 96%의 장애물 인식률과 94%의 손 모양 인식률을 보였다. In this paper, multi-legged robot was designed and produced using stable walking pattern algorithm. The robot had embedded camera and wireless communication function and it is possible to recognize both hand posture and obstacles. The algorithm decided moving paths, and recognized and avoided obstacles through Hough Transform using Edge Detection of inputed image from image sensor. The robot can be controlled by hand posture using Mahalanobis Distance and average value of skin's color pixel, which is previously learned in order to decide the destination. The developed system has shown obstacle detection rate of 96% and hand posture recognition rate of 94%.

PMIC용 32bit eFuse OTP 설계

김민성,윤건수,장지혜,김려연,하판봉,김영희,Kim, Min-Sung,Yoon, Keon-Soo,Jang, Ji-Hye,Jin, Liyan,Ha, Pan-Bong,Kim, Young-Hee 한국정보통신학회 2011 한국정보통신학회논문지 Vol.15 No.10

본 논문에서는 Magnachip $0.18{\mu}m$ 공정을 이용하여 PMIC용 32bit eFuse OTP IP를 설계하였다. eFuse 링크 아래에 N-Well을 두어 프로그램시 eFuse 링크와 p-기판의 VSS가 단락되는 문제점을 해결하였다. 그리고 디코딩된 WERP (WL Enable for Read or Program) 신호가 eFuse OTP 메모리로 바로 입력되는 경우 듀얼 포트 eFuse OTP 메모리 셀의 RWL (Read Word-Line)과 WWL (Write Word-Line)을 선택적으로 활성화해 주는 WL 구동회로를 제안하였다. 또한 BL 프리차징 회로에서 delay chain을 제거하여 제어회로의 레이아웃 면적을 줄였다. 메모리 테스트 장비를 이용하여 제작된 94개의 샘플 die를 측정한 결과 5.5V의 프로그램 전압에서 100%의 수율을 얻었다. In this paper, we design a 32-bit eFuse OTP memory for PMICs using MagnaChip's $0.18{\mu}m$ process. We solve a problem of an electrical shortage between an eFuse link and the VSS of a p-substrate in programming by placing an n-well under the eFuse link. Also, we propose a WL driver circuit which activates the RWL (read word-line) or WWL (write word-line) of a dual-port eFuse OTP memory cell selectively when a decoded WERP (WL enable for read or program) signal is inputted to the eFuse OTP memory directly. Furthermore, we reduce the layout area of the control circuit by removing a delay chain in the BL precharging circuit. We'can obtain an yield of 100% at a program voltage of 5.5V on 94 manufactured sample dies when measured with memory tester equipment.

채널보상기법을 사용한 전화 음성 연속숫자음의 인식 성능향상

김민성,정성윤,손종목,배건성,Kim Min Sung,Jung Sung Yun,Son Jong Mok,Bae Keun Sung 대한음성학회 2002 말소리 Vol.44 No.-

Channel distortion degrades the performance of speech recognizer in telephone environment. It mainly results from the bandwidth limitation and variation of transmission channel. Variation of channel characteristics is usually represented as baseline shift in the cepstrum domain. Thus undesirable effect of the channel variation can be removed by subtracting the mean from the cepstrum. In this paper, to improve the recognition performance of Korea connected digit telephone speech, channel compensation methods such as CMN (Cepstral Mean Normalization), RTCN (Real Time Cepatral Normalization), MCMN (Modified CMN) and MRTCN (Modified RTCN) are applied to the static MFCC. Both MCMN and MRTCN are obtained from the CMN and RTCN, respectively, using variance normalization in the cepstrum domain. Using HTK v3.1 system, recognition experiments are performed for Korean connected digit telephone speech database released by SITEC (Speech Information Technology & Industry Promotion Center). Experiments have shown that MRTCN gives the best result with recognition rate of 90.11% for connected digit. This corresponds to the performance improvement over MFCC alone by 1.72%, i.e, error reduction rate of 14.82%.

색채 조화이론을 통해 본 산복도로 르네상스마을 조형성 분석

김민성,정재훈,Kim, Min-Sung,Chung, Jae-Hoon 한국주거학회 2015 한국주거학회 논문집 Vol.26 No.3

The purpose of this study is to analyze the aesthetic factors in color combinations of house exteriors in hillside villages, Busan. The so-called 'Hillside renaissance' is a representative urban regeneration project in Busan. The towns in hillside area in Busan have developed colorful sceneries. But all the colorful sceneries are not the same. Each town has own color characters and different aesthetic color effects. This study is to determine the unique aesthetic components in color combination of Gamcheon and Daecheong. This study is based on the traditional color harmony theories. The analysis focuses, inter alia, on Moon-Spencer's 'Aesthetic Measure'. A house exterior color has relations with two neighboring colors in array. And those three colors with next two houses have again each three hue, value and chroma relations. This analysis is first to determine whether each sample color combination is harmonized, and if harmonized, next step to list which aesthetic factor is dominantly contributing to color harmony. And at last, to study the subcategorized sectors of each color components of the hue, value and chroma.

어장환경 - 활짝 웃는 바다가 좋다

김민성,Kim, Min-Seong 한국어촌어항협회 2011 어항어장 Vol.96 No.-

한국어 연속 숫자음 전화 음성 인식에서의 오인식 유형 분석

김민성,정성윤,손종목,배건성,김상훈,Kim Min Sung,Jung Sung Yun,Son Jong Mok,Bae Keun Sung,Kim Sang Hun 대한음성학회 2003 말소리 Vol.46 No.-

Channel distortion and coarticulation effect in the Korean connected digit telephone speech make it difficult to achieve high performance of connected digit recognition in the telephone environment. In this paper, as a basic research to improve the recognition performance of Korean connected digit telephone speech, recognition error patterns are investigated and analyzed. Korean connected digit telephone speech database released by SiTEC and HTK system are used for recognition experiments. Both DWFBA and MRTCN methods are used for feature extraction and channel compensation, respectively. Experimental results are discussed with our findings.