http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김미소 ( Miso Kim ),백금지 ( Geumji Back ),변은경 ( Eun Kyung Byun ),이유림 ( You Lim Lee ),최예지 ( Yeji Choi ),장정원 ( Jungwon Chang ),홍현선 ( Hyun Seon Hong ) 한국폐기물자원순환학회(구 한국폐기물학회) 2019 한국폐기물자원순환학회 춘계학술발표논문집 Vol.2019 No.-
ITO (Indium Tin Oxide) transparent electrode of after used LCD, contains indium oxides, which is classified as an expensive rare metal. Therefore, LCD recycling is becoming an important issue in terms of solving environmental problems and securing resources. Followed by dismantling of waste LCD, for hydrometallurgical indium recovery from LCD through solvent extraction is the rudimentary stage. The determination of optimum conditions is rather essential from efficient solvent extraction process development perspective. Hence, solvent extraction efficiency of indium as function of leachant(A)/extractant(O) ratio, extractant(O)/stripping reagent(A') ratio and reaction temperature were investigated. Through our investigation, A/O and O/A' ratio varies from 1 to 8, reaction temperature varies from 25℃(RT) to 80℃. As extractant and stripping reagent, D2EHPA and HCl were used, respectively.
김미소(Miso Kim),조승현(Seung Hyun Cho),장강원(Gang-Won Jang),이승석(Seung-Seok Lee),박익근(Ik-Keun Park) 한국비파괴검사학회 2014 한국비파괴검사학회지 Vol.34 No.3
나노/마이크로 소자의 개발이 활발해짐에 따라 나노/마이크로 박막의 기계적 물성의 정밀 측정에 대한 필요성이 점차 커지고 있다. 기존의 파괴적인 방법의 한계를 극복하기 위한 방법으로, 유도초음파를 이용한 비파괴적인 박막 물성 방법에 대한 관심이 늘어나고 있다. 유도초음파를 이용하여 박막의 물성을 측정하는 실험을 설계하거나, 물성 측정에 대한 실험 결과를 이해하는데 있어 박막의 분산선도를 이해하는 것은 필수적이라 할 수 있다. 본 연구에서는, 전달 행렬법을 이용하여 박막의 분산선도를 계산하는 방법을 제시하고, 이를 금속 박막에 적용하여 그 특성을 관찰하였다. 전달 행렬법을 이용하여 다층판에서의 주파수에 따라 유도초음파가 전파하는 속도를 계산하여 상용 프로그램과 비교하여 그 타당성을 확인하였다. 이러한 방법을 Si 기판 위에 증착된 Al 금속 박막에 적용하여 얻은 분산곡선의 분석을 통해, 박막의 두께 조건에 따른 모드와 분산 및 비분산 특성이 나타나는 구간을 관찰할 수 있었다. In this study, we investigated the dispersion characteristics of guided waves in thin films. Dispersion curves are essential for understanding not only the behavior of ultrasonic waves, but also the mechanical properties of thin films. Matrix techniques are presented for modeling ultrasonic waves in multilayered structures before being used to calculate the dispersion curves for Al-steel and Al-composite specimens. When compared with the dispersion curves obtained using the commercial program (Disperse), the dispersion curves generated from the transfer matrix method show its validity. These developed methods are used to obtain dispersion curves for Al thin films deposited on a Si substrate. The resulting dispersion curves enable observation of both dispersive and nondispersive behavior for the guided waves, depending on the thickness of the thin films.