http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김동욱,이기연,김향곤,김만건,Kim, Dong-Ook,Lee, Ki-Yeon,Kim, Hyang-Kon,Kim, Man-Geon 한국화재조사학회 2008 한국화재조사학회 논문지 Vol.11 No.1
본 연구는 저압 분전함내에서 발생한 사고사례를 분석하여 사고의 메커니즘과 사고특성 등을 연구하여 사고 패턴을 제시함으로서 전기설비 사고 원인 분석 및 진단을 위한 자료를 확보하고자 하였다. 이를 위해 금속현미경, X-ray, FI-IR 등의 분석을 하였다. This paper deals with damage patterns of cabinet panel for low voltage deteriorated by flame. In order to analyze damage patterns, we used Metallurgical Microscope, x-ray system, and Fourier Transform Infrared spectroscopy. Firstly, Metallurgical microscope was used for analysis of electrical causes, such as electric short and overload Secondly, X-ray system was used for analysis of internal characteristics of circuit breakers. Lastly, Fourier Transform Infrared spectroscopy was used for analysis of damage direction by flame.
김동욱,문현욱,이기연,김향곤,최충석,Kim, Dong-Ook,Moon, Hyun-Wook,Lee, Ki-Yeon,Kim, Hyang-Kon,Choi, Chung-Seog 한국조명전기설비학회 2007 조명·전기설비학회논문지 Vol.21 No.8
과전압에 의한 절연파괴와 허용전류의 초과에 따른 과열 그리고 장기간 사용에 따른 절연 성능 저하 등에 의해 전기사고는 발생한다. 본 논문은 정수기에서 사용되는 PCB의 전원 제어 시스템 개선에 관한 연구로서 기존의 전원제어 시스템에서는 임펄스 형태의 서지의 경우만 바리스터 소자로 구성된 보호 시스템이 설계되어 있었다. 이러한 기존의 시스템은 임펄스 형태 이외의 과전압이 시스템에 입력되었을 경우 시스템을 보호하지 못했기 때문에 새로운 전원 제어 시스템을 설계하여 과전압으로부터 시스템을 보호하여 전기사고를 미연에 방지하고자 하는데 그 목적이 있다. 본 논문에서 제안한 전원 제어 시스템은 입력전원의 전압을 인지하여 설정된 전압 이상의 전압이 입력되는 경우 SSR(solid state relay)을 통하여 전원을 차단하여 시스템을 보호하도록 설계하였다. The electrical accident results from an insulation blackdown by over-voltage, an overheating by the excess of allowable current, a deterioration performance by the passage of time, and so on. This paper discusses how to improve the power control system of PCB in water purifier. The protecting device of present power supply control system in water purifier is composed of the varistor device which acts only for impulse-type surges. So the present system can not be protected others except the surge of impulse-type. The newly-suggested power control system in this paper is designed to protect the system by disconnecting power supply through SSR(Solid State Relay) if the value of input voltage is exceeded the setting value.
김동욱(Dong-Ook Kim),길형준(Hyoung-Jun Gil),김향곤(Hyang-Kon Kim),최충석(Chung-Seog Choi) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.5
전원 코드에서의 전기재해는 외부의 기계적 피로에 의해 피복이나 피복 내부의 도체가 손상되어 이루어지는 경우가 많다. 특히, 전기청소기, 모발건조기 등 이동용 전기제품에서 잦은 반복 스트레스로 인해 전원코드에서 반단선에 의한 전기화재가 발생한다. 본 연구에서는 전원 코드에 반복 스트레스를 받았을 때 전선의 소선이 손상되는 과정을 X-ray를 이용하여 소손 패턴을 분석하였으며, 반단선에 의한 불꽃 발생과정을 초고속 카메라로 촬영하였다. 또한 소손된 전원 코드를 실체 현미경 및 금속현미경을 이용하여 전선피복과 도체에 나타나는 특징을 분석하였다. 이러한 연구를 통하여 전원코드의 반복 피로에 의한 화재발생 메커니즘과 화재원인 분석에 유용한 자료가 될 것으로 기대된다.
김동욱(Kim, Dong-Ook),이기연(Lee, Ki-Yeon),김동우(Kim, Dong-Woo),길형준(Gil, Hyoung-Jun),김향곤(Kim, Hyang-Kon) 한국화재소방학회 2008 한국화재소방학회 학술대회 논문집 Vol.2008 No.춘계
This paper deals with damage patterns of cabinet panel for low voltage deteriorated by flame. In order to analyze damage patterns, we used Metallurgical Microscope, x-ray system, and Fourier Transform Infrared spectroscopy. Firstly, Metallurgical microscope was used for analysis of electrical causes, such as electric short and overload. Secondly, X-ray system was used for analysis of internal characteristics of circuit breakers. Lastly, Fourier Transform Infrared spectroscopy was used for analysis of damage direction by flame. The following results were obtained.
저압 차단기에서 트래킹에 의한 전기적 특이점에 관한 연구
김동욱(Dong-Ook Kim),문현욱(Hyun-Wook Moon),김동우(Dong-Woo Kim),길형준(Hyung-Jun Gil),정영식(Young-Sik Chung) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.11
2008년도 사고설비별 선기화재 발생현황을 살펴보면 전기화재중 전기배선 및 배선기구에서 발화한 화재가 2,540건으로 전기화재발생 중 25.95%툴 점유하였다. 또한 사고전압별 전기화재 발생현황으로 220/380V에서 화재가 6,320건(644%)으로 전기화재의 대부분을 점유하였다. 전기화재는 단락, 과전류, 접촉불량, 트래킹 등 9가지로 분류할 수 있다. 이러한 전기로부터 재해를 막기 위하여 누전차단기나 배선용차단기를 사용하여 일부의 전기화재 원인을 차단할 수 있으나 차단기 자체에서 발생하는 원인에 대하여는 보호함 선기기기가 부재하다. 본 논문에서는 최근 실화법의 적용으로 일반적으로 전기화재로 취급되어지지만 보다 세밀히 조사하면 제조결함, 사용자 부주의, 설치 및 환경에 따른 위험성을 분석하고 전기설비에서의 화재 발생에 대한 예방대책에 활용할 수 있도록 연구하였다.