http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
프로젝션 용접 전극을 위한 시효경화성 Cu-2.0wt%Be 합금의 미세조직과 기계적성질
김광수,김진용,Kim, Gwangsoo,Kim, Jinyong 한국재료학회 2015 한국재료학회지 Vol.25 No.9
Evaluations of the microstructure and mechanical properties of age hardenable Cu-2.0wt%Be alloy are performed in order to determine whether it can be used as a welding electrode for projection welding. The microstructure examinations, hardness measurements, and tensile tests of selective aging conditions are conducted. The results indicate that the aging treatment with the fine-grained microstructure exhibits better hardness and high tensile properties than those of the coarse-grained microstructure. The highest hardness value and high tensile strength are obtained from the aged condition of $300^{\circ}C$ for 360 min due to the presence of the metastable ${\dot{\gamma}}$ precipitates on the grain boundaries. The values of the highest hardness and tensile strength are measured as 374 Hv and 1236.2 MPa, respectively. The metastable ${\dot{\gamma}}$ precipitates are transferred to the equilibrium ${\gamma}$ precipitates due to the over-aged treatment. The presence of the ${\gamma}$ precipitates appears as nodule-like precipitates decorated around the grain boundaries. The welding electrode with the best aging treated condition exhibits better welding performance for electrodes than those of electrodes used previously.
김광수,남궁작,정순석,Kim, Kwang-Soo,NamGung, Jak,Chung, Soon-Suk 한국벤처창업학회 2012 벤처창업연구 Vol.7 No.1
This study is aimed to measure the cause and effect relationship on observation on KS evaluation by surveys related to KS certification, opinions and satisfaction on KS certification, expected effect through KS certification, profitability performance, financial performance, and productivity performance based on department heads and acting chiefs working on KS certification, to SMEs which have acquired KS certification mark in Korea. This study also aims to examine how KS certification is impacting on companies' expected effects, management performance and development by examining the realistic effects of KS certification in various aspects and expected effects on companies. 본 연구는KS 표시 인증을 획득한 중소기업을 중심으로 KS인증과 관련된 제반 질문사항에 대한 설문(KS심사기준 준수, KS인증운용 의견, KS인증 만족도)조사를 하였다. KS인증을 통해 기대되는 효과, 수익성, 재무성과, 생산성에 대하여 그 인과 관계를 추정하기 위한 것으로서, KS 표시 인증의 실질적인 효과를 다양한 측면에서 연구한다. 또한 기업에 기대되는 효과를 연구하여, 궁극적으로는 KS 표시 인증이 기업에 기대되는 효과와 경영 성과 및 발전에 얼마나 영향을 주고 있는지 알아보고자 한다.
김광수,Kim, Kwang-Soo 해양환경안전학회 2005 海洋環境安全學會誌 Vol.11 No.2
As recently, 'International convention for the control and management of ship's ballast water and sediments' was adopted, it is necessary to accept the international convention in Korea The movements of foreign countries for ship's ballast water control and management were investigated, and domestic environment-related laws were reviewed and compared regarding the discharge of industrial wastewater and ship's ballast water. Alternative measures of domestic legislation were suggested for acceptance of the international convention. 최근에 "선박의 밸러스트수와 침전물의 제어 및 관리를 위한 국제협약 "이 채택되면서 국내에서도 이 국제협약을 수용하기 위한 방안이 필요하다. 외국의 밸러스트수 제어/관리 동향을 살펴보고, 국내의 환경관계법규들을 비교$\cdot$검토함으로써 밸러스트수관리협약을 수용하기 위한 국내 입법화 방안을 제시하였다.
국내 조선소 주변해역의 해양오염 현황 - 2. 2010년 하계 대형조선소 주변 해수의 중금속오염 평가
김광수,Kim, Kwang-Soo The Korean Society of Marine Environment and safet 2015 해양환경안전학회지 Vol.21 No.1
국내 대형 조선소 주변해역의 중금속오염 현황을 밝히기 위하여 2010년 여름에 4개의 대형 조선소 주변 11개의 채수정점과 4개의 대조정점에서 해수 시료를 채취하여 6종의 금속(Cu, Zn, Fe, Cd, Pb, Hg)을 분석하였다. 조선소별 주변해역 수중의 금속을 분석한 결과, (1) 구리(Cu)의 평균 농도는 $0.817{\sim}1.638{\mu}g/L$로 해역환경기준(사람의 건강보호기준 $20{\mu}g/L$, 해양생태계 보호 단기기준 $3{\mu}g/L$)보다 낮았지만, 대조정점에 비하여 1.64~2.75배의 높은 값을 나타냈다. (2) 아연(Zn)의 평균 농도는 $ 0.228{\sim}0.567{\mu}g/L$로 해역환경기준(사람의 건강보호기준 $100{\mu}g/L$, 해양생태계 보호 단기기준 $34{\mu}g/L$)보다 낮았지만, 대조정점에 비하여 1.62~5.91배의 높은 값을 나타냈다. (3) 철(Fe)의 평균 농도는 $3.332{\sim}7.410{\mu}g/L$로 대조정점에 비하여 1.30~6.75배의 높은 값을 나타냈다. (4) 카드뮴(Cd)의 평균 농도는 $0.013{\sim}0.028{\mu}g/L$로 해역환경기준(사람의 건강보호기준 $10{\mu}g/L$, 해양생태계 보호단기기준 $19{\mu}g/L$)보다 낮았지만, 대조정점에 비해 1.18~2.33배의 높은 값을 나타냈다. (5) 납(Pb)의 평균 농도는 $0.007{\sim}0.126{\mu}g/L$로 해역환경기준(사람의 건강보호기준 $50{\mu}g/L$, 해양생태계 보호 단기기준 $7.6{\mu}g/L$)보다 낮았다. (6) 수은(Hg)의 평균 농도는 $0.002{\sim}0.004{\mu}g/L$로 해역환경기준(사람의 건강보호기준 $0.5{\mu}g/L$, 해양생태계 보호 단기기준 $1.8{\mu}g/L$)보다 낮았다. 비록 모든 중금속의 수중 농도가 해역환경기준보다 낮다고 할지라도, 선박 건조작업에 사용되는 구리, 아연, 철과 같은 중금속의 농도가 대조해역에 비해 조선소 주변해역에서 높다는 것은 조선소의 영향에 기인하는 것을 암시한다. 따라서 조선소로부터 각종 오염물질이 해양에 유입되지 않도록 통제하고 해양오염을 방지하는 국가적 차원의 해양환경관리가 필요하다. In order to elucidate the current state of marine pollution of heavy metals around major shipyards in Korea, seawater samples were collected at eleven sampling stations and four control stations around 4 major shipyards located in the southeastern coast of Korea in summer 2010, and 6 kinds of metals such as copper(Cu), zinc(Zn), iron(Fe), cadmium(Cd), lead(Pb) and mercury(Hg) in seawater samples were analyzed. The analyses of heavy metals in seawater showed that the mean Cu concentrations in seawater around 4 major shipyards were in the range of $0.817{\sim}1.638{\mu}g/L$ which were lower than Korean environmental standards of $20{\mu}g/L$ for the protection of human health(PHH) and of $3{\mu}g/L$ for short-term protection of marine ecosystem(SPME) but higher than Cu concentration at control station by a factor of up to 2.75. The mean Zn concentrations were in the range of $0.228{\sim}0.567{\mu}g/L$ which were lower than Korean environmental standards of $100{\mu}g/L$ for PHH and $34{\mu}g/L$ for SPME but higher than Zn concentration at control station by a factor of up to 5.91. The mean Fe concentrations were in the range of $3.332{\sim}7.410{\mu}g/L$ which were higher than Fe concentration at control station by a factor of up to 6.75. The mean Cd concentrations were in the range of $0.013{\sim}0.028{\mu}g/L$ which were lower than Korean environmental standards of $10{\mu}g/L$ for PHH and $19{\mu}g/L$ for SPME but higher than Cd concentration at control station by a factor of up to 2.33. The mean Pb concentrations were in the range of $0.007{\sim}0.126{\mu}g/L$ which were lower than Korean environmental standards of $50{\mu}g/L$ for PHH and $7.6{\mu}g/L$ for SPME. The mean Hg concentrations were in the range of $0.002{\sim}0.004{\mu}g/L$ which were lower than Korean environmental standards of $0.5{\mu}g/L$ for PHH and $1.8{\mu}g/L$ for SPME. Although the concentrations of metals such as Cu, Zn and Fe which were used in shipbuilding works were lower than Korean environmental standards for PHH and SPME, the fact that the concentrations of Cu, Zn and Fe at sampling stations around major shipyards were higher than those at control stations implies that the works in shipyards had some effects on marine water quality around shipyards. Therefore, marine environment management such as the prevention and control of the discharge of various pollutants from shipyards is required on national level.